Soil electrical resistivity is a fundamental parameter in various geotechnical, agricultural, environmental, and engineering applications, as it directly depends on the soil’s moisture content and physical properties. Understanding this relationship is crucial for improving the safety and efficiency of electrical installations. This study analyzes the relationship between soil electrical resistivity and gravimetric moisture content in three soil types, sandy, clayey, and silty, with the aim of comparing the performance of different predictive models under controlled laboratory conditions. Seven fitting models were evaluated, Logarithmic Spline, Radial Basis Function (RBF), Locally Estimated Scatterplot Smoothing (LOESS), Least Absolute Shrinkage and Selection Operator (LASSO), Ridge Regression (RIDGE), Power Law and a segmented equation, using metrics such as Root Mean Square Error (RMSE), Mean Absolute Error (MAE), Mean Absolute Percentage Error (MAPE) and coefficient of determination $R^2$ . The Spline and RBF models showed excellent accuracy and near-zero errors in all soils, although their applicability is limited by the lack of an explicit formulation and by the fact that, as interpolation methods, they do not guarantee predictive capacity outside the experimental dataset. Therefore, their use should be restricted to controlled laboratory conditions, as field variability factors can significantly alter soil resistivity responses. Among the explicit models, the Segmented Equation obtained a MAPE of 6.14% (sandy), 15.1% (clayey), and 13.16% (silty), with $R^2$ values of 0.91, 0.93, and 0.89, respectively, demonstrating good performance and functionality. The Power Law model, although showing an $R^2$ close to 0.96, presented significant overestimations, especially in silty soils (MAPE > 187%). The LASSO model yielded inconsistent predictions with percentage errors exceeding 120% in silty soils. In conclusion, nonparametric models provide excellent accuracy, while the segmented equation stands out as the best explicit alternative for estimating resistivity with reasonable precision.

Grounding Systems (GS) play a critical role in electrical safety, lightning protection, and the reliable operation of power and renewable energy infrastructures, particularly in high-resistivity soils. In this context, Ground Enhancement Materials (GEM) are widely used to reduce soil resistivity and improve grounding performance. This systematic review analyzes and synthesizes recent advances (2018–2025) in GEM applied to GS, with emphasis on their electrical performance, durability, and environmental sustainability. The review covers conventional GEM, industrial waste-derived materials, and hybrid formulations, evaluating their effectiveness under different soil types and moisture conditions. Comparative analysis of the literature indicates that GEM derived from industrial byproducts and hybrid composites often exhibit superior long-term resistivity reduction due to enhanced moisture retention and material-soil interactions, especially in clay-rich and heterogeneous soils. Sustainability considerations such as environmental impact, material availability, and long-term stability are increasingly influencing GEM selection and design. Overall, this review provides a structured framework for understanding the factors governing GEM performance while highlighting current trends, challenges, and future research directions in the development of sustainable grounding solutions.

Soil electrical resistivity (SER) is widely used as an indirect indicator of soil physical, chemical, and hydrological properties and plays an important role in applications such as grounding system design, geotechnical site characterization, agricultural soil monitoring, and environmental contamination assessment. However, SER is strongly influenced by environmental variables including soil moisture content, temperature, salinity, and soil texture, which makes accurate prediction challenging under heterogeneous field conditions. A systematic review was conducted following the PRISMA 2020 protocol using the Scopus database to identify peer-reviewed studies published between 2018 and 2026 related to predictive models of soil electrical resistivity based on environmental parameters. After applying defined inclusion and exclusion criteria, a set of relevant studies was selected for qualitative and comparative analysis. The reviewed studies consistently identify soil moisture content as the most frequently reported influential factor affecting SER, followed by temperature, salinity, and soil texture. This observation reflects the predominant focus of the analyzed literature within the selected time frame rather than a definitive representation of all controlling physical processes. Similarly, the reviewed literature suggests that empirical and statistical models remain valuable due to their simplicity and interpretability, whereas machine learning approaches such as artificial neural networks, support vector regression, and ensemble methods are often reported to achieve higher predictive accuracy in complex soil environments. The predictive SER modeling represents a rapidly evolving research field, and future work should focus on hybrid physics-informed machine learning models, the development of standardized datasets, and the integration of predictive algorithms with emerging sensing technologies and IoT-based monitoring systems.

The construction sector is responsible for significant global energy consumption and CO₂ emissions, largely driven by carbon-intensive materials such as ordinary Portland cement and steel. In response to increasing decarbonization and circular economy demands, several strategically relevant categories of sustainable construction materials have been developed, particularly natural and bio-based systems, recycled and waste-derived materials, low-carbon cementitious binders, and emerging multifunctional composites. However, research remains fragmented across material classes and performance metrics. This systematic review evaluates advances published between 2018 and 2026 following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 methodology. Peer-reviewed studies were systematically identified and analyzed to compare mechanical performance, durability, embodied carbon reduction, and life-cycle environmental impacts across these selected material pathways. The results indicate substantial decarbonization potential. Low-carbon cementitious materials report CO₂ reductions of approximately 10–75% relative to conventional systems, while engineered timber and bamboo demonstrate 28–70% lower carbon footprints due to reduced embodied energy and biogenic carbon storage. Recycled aggregates and industrial by-products enhance circularity but remain sensitive to transport distance and processing intensity. Trade-offs between mechanical capacity and environmental performance are evident in lightweight and bio-based systems. Overall, sustainability gains are maximized through integrated hybrid construction strategies rather than isolated material substitution. This review provides a comparative evidence-based synthesis and identifies key research gaps and implementation challenges for accelerating low-carbon construction.

The transition toward low-carbon and circular Municipal Solid Waste (MSW) systems requires integrated evaluation approaches that consider environmental performance, technological maturity, and governance capacity. This study presents a structured, systematic review of MSW disposal and treatment practices published between 2018 and 2026, following the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) 2020 guidelines. A total of 71 studies were included and analyzed. Due to heterogeneity in methodologies, system boundaries, and reported indicators, no formal meta-analysis was conducted. Instead, the review provides a comparative and qualitative synthesis of key environmental indicators and structural determinants. Results indicate a transition from open dumping toward engineered landfills and advanced treatment technologies, including waste-to-energy and biological processes. Open dumping is consistently associated with high greenhouse gas emissions and environmental risks, while engineered systems improve containment and enable partial resource recovery. The findings highlight that environmental performance is not determined solely by technology but by the interaction between infrastructure design, operational quality, governance capacity, and economic conditions. The proposed analytical framework supports context-sensitive waste management strategies aligned with circular economy principles and climate mitigation objectives.

The construction sector is undergoing a rapid transition toward more resilient, sustainable, and digitally connected systems, creating increasing demand for materials capable of providing functions beyond conventional structural performance. In this context, smart materials have emerged as promising solutions due to their ability to respond to mechanical, thermal, chemical, or electromagnetic stimuli through adaptive behaviors such as self-healing, structural sensing, energy regulation, vibration control, and reversible deformation. Despite growing scientific interest, available knowledge remains fragmented across specific material families and isolated application domains. Therefore, this study presents a PRISMA-based systematic review of smart materials in construction using peer-reviewed journal literature indexed in Scopus during the 2021–2026 period. The review examines the principal smart material families currently applied in construction, including self-healing concretes, self-sensing cementitious systems, Shape Memory Alloys (SMA), piezoelectric materials, phase change materials, adaptive coatings, conductive nanocomposites, and multifunctional geopolymers. Their engineering functions, structural and architectural applications, reported performance characteristics, sustainability contributions, digital integration potential, and implementation barriers are comparatively discussed and qualitatively synthesized based on the reviewed literature. The findings indicate that smart materials can improve durability, structural health monitoring, seismic resilience, thermal efficiency, lifecycle performance, and carbon reduction when properly integrated into buildings and infrastructure. However, large-scale adoption remains constrained by high initial costs, manufacturing scalability, regulatory uncertainty, long-term durability validation, and limited market confidence. The review further shows that the greatest future potential lies in combining material intelligence with IoT platforms, artificial intelligence, BIM environments, and digital twins. Overall, smart materials are positioned as strategic enablers of next-generation low-carbon, adaptive, and intelligent construction systems.