Chaosai Liu

Dr. Chaosai Liu

Henan University of Technology, Zhengzhou, Henan, China
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 November 2022 in Foods
Verified
Journal Article
Open access
PDF file
GCGuixiang Chen
Guixiang Chen
JHJIA HOU
JIA HOU
Chaosai LiuChaosai Liu
Chaosai Liu
Food storage helps to ensure the food consumption needs of non-agricultural populations and to respond to major natural disasters or other emergencies, and the application of food storage technology can reduce post-harvest food losses. However, there are still obvious shortcomings in coping with large grain losses. Therefore, quantitative analysis of the research hotspots and evolutionary trends of grain storage technology is important to help the development of grain storage technology. This article uses the Web of Science database from 2007 to 2022 as a data sample with the help of CiteSpace software to analyze the basic situation, research hotspots, and evolutionary trends to draw a series of relevant knowledge maps. Visual analysis revealed that the number of publications had grown rapidly since 2015. First, the Journal of Stored Products Research, Journal of Economic Entomology, and Journal of Agricultural and Food Chemistry, with citation frequencies of 929, 536, and 453, should be focused on in order to keep up with the latest research developments in this field. The United States, China, and Brazil occupy dominant positions in relation to grain storage technology studies in general. Purdue University, Kansas State University, and Agricultural Research Institute ranked the top three in terms of the number and centrality of publications. In terms of research hotspots, the centrality of temperature, insects, carbon dioxide, and quality were 0.16, 0.09, 0.08, and 0.08. It shows that the field of grain storage technology in recent years has focused on grain storage temperature, pest control, and grain storage quality research. From the perspective of the evolution trend, the life cycle of emergent words lasts for several years, after which the strength of emergent words slowly decreases and is replaced by new emergent words. Mortality was the first keyword to appear and remained from 2007 to 2011, indicating that research on fumigants and their toxicity, as well as pest mortality under air fumigation and chemical fumigation conditions, became more popular during this period. In recent years, new terms have emerged that had never been used before, such as “grain quality” (2019–2022) and “stability” (2020–2022). We can find that people pursue food quality more with the improvement of people’s living standards. In this context, future research should seek more efficient, safe, economical, and environmentally friendly methods of grain storage and continuously improve the level of scientific grain storage.

6 July 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
WLWenlei Liu
Wenlei Liu
GCGuixiang Chen
Guixiang Chen
Chaosai LiuChaosai Liu
Chaosai Liu
DZDeqian Zheng
Deqian Zheng
MGMengmeng Ge
Mengmeng Ge
The vertical pressure lead to increased airflow resistance through the grain bulk, which affected the efficiency of ventilation and drying. The effects of vertical pressures at 50, 150, and 250 kPa on the pressure drop characteristics of soybeans were studied using experiment and numerical simulation. The random packing and different compression states for soybean packed beds were generated by the Discrete Element Method (DEM). The Discrete Element Method (DEM) and Computational Fluid Dynamics (CFD) were coupled to investigate the radial velocity and pressure drop of soybean bulk. The simulation results showed that the radial porosity had an oscillating distribution, and the radial average dimensionless velocity was consistent with the distribution trend of porosity. The increase in vertical pressure causes a decrease in porosity and an increase in local velocity. The PathFinder code was used as a supplementary method to calculate the pore path and pore characterization parameters, and the resistance coefficient term in the Forchheimer equation was determined. The compression of soybeans measured by the experiment mainly occurred within two hours after loading. The pressure drop of soybeans increased with the vertical pressure, with the average pressure drop at vertical pressures of 50, 150, and 250 kPa being 36%, 57%, and 92% higher than the uncompressed state (0 kPa). The pressure drop of soybeans calculated by the DEM-CFD method and the Forchheimer equation under different vertical pressures were in close agreement with the experimental results, and an average relative difference was found to be less than 10%. These results provide guidance for estimating the pressure drop of soybeans at different grain depths.

25 July 2023 in Agriculture
Verified
Journal Article
Open access
PDF file
WLWenlei Liu
Wenlei Liu
GCGuixiang Chen
Guixiang Chen
DZDeqian Zheng
Deqian Zheng
MGMengmeng Ge
Mengmeng Ge
Chaosai LiuChaosai Liu
Chaosai Liu
To investigate the pore structure distribution and the coupled heat and moisture transfer during the drying process of the grains, this study focuses on fixed-bed corn drying with varying levels of broken kernel rate. A model of internal flow and conjugate heat and mass transfer was established for the drying process. Random packing models of whole and half corn kernels with different proportions were generated using rigid body dynamics (RBD), and the porosity, airflow distribution, and coupling of temperature and moisture transfer in fixed beds with different levels of broken kernel rate were analyzed. A fixed-bed corn drying device was developed, and the effects of broken particle contents of 0%, 10%, 20%, and 30% on drying characteristics were studied. The research findings reveal that the radial porosity in the fixed bed exhibits an oscillating distribution, with the localized porosity decreasing as the broken kernel rate increases. Increasing the broken kernel rate intensifies the curvature of the airflow paths within the fixed bed, increasing the pressure drop in the bed. The broken kernels fill the gaps between the whole kernels, improving the uniformity of the velocity distribution within the fixed bed. Under various packing models, the average discrepancy between pressure drop obtained from Particle-resolved Computational Fluid Dynamics (PRCFD) simulations with experimental remains below 15%. The increase in broken kernel rate within the fixed bed enlarges the heat transfer area, resulting in an elevation of the transient heat transfer characteristic parameters during drying. Simultaneously, the broken kernel rate increases the surface area of mass transfer, thereby enhancing the moisture transfer rate within the fixed bed. Compared to the fixed bed without broken kernels (0%), which requires 560 min to dry the corn pile to a safe moisture of 14% (d.b.), the drying time is reduced by 60 min, 100 min, and 130 min for the respective broken kernel contents of 10%, 20%, and 30%, respectively. The PRCFD method successfully simulates the processes of convective heat and mass transfer in the fluid phase and thermal and mass diffusion in the solid phase, exhibiting a strong correlation with experimental data.

11 May 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Chaosai LiuChaosai Liu
Chaosai Liu
YZYang Zhou
Yang Zhou
GCGuixiang Chen
Guixiang Chen
DZDeqian Zheng
Deqian Zheng
LYLongfei Yue
Longfei Yue
Breakage in maize kernels and vertical pressure in grains lead to the uneven distribution of grain bulk density, which easily causes undesired problems in terms of grain storage. The objective of this study was, therefore, to determine the compression and heat production of the whole kernel (WK) and half kernel (HK) under two different loadings, i.e., 50 and 150 kPa, in maize bulk. An easy-to-use element testing system was developed by modification of an oedometer, and an empirical–analytical–numerical method was established to evaluate fungal heat production, considering kernel breakage and vertical pressure. Based on the experimental results, it was found that breakage induced larger compression; the compression of HK was 62% and 58% higher than that of WK at 50 kPa and 150 kPa, respectively. The creep model of the Hooke spring–Kelvin model in series can be used to accurately describe the creep behavior of maize bulk. Fungi and aerobic plate counting (APC) were affected significantly by the breakage and vertical pressure. APC in HK was 19 and 15 times that of WK under 150 and 50 kPa, respectively. The heat released by the development of fungi was found to be directly related to the APC results. The average temperatures of WK and HK under 150 and 50 kPa were 11.1%, 9.7%, 7.9%, and 7.6% higher than the room temperature, respectively. A numerical method was established to simulate the temperature increase due to fungi development. Based on the numerical results, heat production (Q) by fungi was estimated, and the results showed that the Q in HK was 1.29 and 1.32 times that of WK on average under 150 and 50 kPa. Additionally, the heat production results agreed very well with the APC results.

28 October 2022 in Buildings
Verified
Journal Article
Open access
PDF file
GCGuixiang Chen
Guixiang Chen
JHJIA HOU
JIA HOU
Chaosai LiuChaosai Liu
Chaosai Liu
Kui HuKui Hu
Kui Hu
JWJun Wang
Jun Wang
Big data technology has triggered a boom in research and applications around the world. The construction industry has ushered in a new technological change in this context. Researchers have conducted in-depth research on the intersection of big data and architecture, but lack quantitative analysis and comprehensive evaluation of the research results. This article draws a series of knowledge maps with the help of the CiteSpace software using the relevant literature in the Web of Science database between 2007 and 2022 as data samples to comprehensively grasp the research development at the intersection of big data and the construction industry. The knowledge base, research hotspots, and domain evolution trends in the intersection of big data and the construction industry are analyzed quantitatively and aided by qualitative analysis through visualization, respectively. The results show that Chinese and American scholars have published more relevant papers in international journals, and some well-known universities in both countries constitute the main group of research institutions. The research hotspots are BIM, data mining, building energy saving, smart cities, and disaster prevention and damage prevention. In the future, the research on the integration and application of the construction industry with emerging technologies, such as big data, BIM, and cloud computing will be connected more closely. This study provides a preliminary overall picture of the research of big data in the field of construction by sorting out and analyzing the existing results.

29 May 2023 in International Agrophysics
Verified
Journal Article
Open access
MGMengmeng Ge
Mengmeng Ge
GCGuixiang Chen
Guixiang Chen
Chaosai LiuChaosai Liu
Chaosai Liu
DZDeqian Zheng
Deqian Zheng
WLWenlei Liu
Wenlei Liu
Pore structure is an important factor affecting the airflow distribution in a grain pile, and hence the variation in its structural parameters under different vertical pressures should be studied further. In this study, grain slice imaging and image processing technologies were comprehensively...