Dissimilar metal weld joints of Monel 400 and Stainless Steel 316L stainless steel were carried out using Gas Tungsten Arc Welding (GTAW). Conventional annealing and cryogenic treatment were performed on the welded joints. Weld joints of this combination of materials have enormous potential applications in power industry and the available related literature is limited. In the present study, the tensile properties of heat treated (HT), cryotreated (CT), and untreated (UT) specimens were studied. The engineering stress and strain were determined experimentally as per Standard Test Methods for Tension Testing of Metallic Materials (ASTM E8). The strain distribution was evaluated at different zones of weld joint was evaluated using Digital Image Correlation (DIC). Significant difference was noticed between the zones. Weld zone of all samples had less local stress and strain and SS 316L heat affected zone (HAZ) zone had more local stress and strain when compared to other zones. The local strain distribution along distance from weld center line and local stress-strain curves of different zones are also predicted. Scanning Electron Microscopy was used to analyze the fracture behavior of welded samples for HT, CT, and UT specimens.
An attempt was made to study the corrosion behavior of austenitic stainless-steel SS 316L/Monel 400 alloy dissimilar metal welded joints using gas tungsten arc welding. This combination of welded joints is used in re-heaters and heat exchangers in gas processing and oil refining industries. The welded specimens were subjected to post-weld treatments, such as annealing and deep cryogenic treatment. The welded specimens were sectioned into five different parts: SS 316L base, SS 316L HAZ, weld, Monel HAZ, and Monel base. The polarization method and electrochemical impedance analysis were used to analyze the corrosion resistance in a NaCl solution. A polarization graph, Nyquist plot, and Bode plot were constructed for all regions, separately, for the heat-treated and cryo-treated specimens, to analyze the variation in corrosion resistance in different regions, and then the results were compared. To validate the results of electrochemical impedance analysis, scanning electron microscope (SEM) and energy dispersive spectroscope (EDS) analyses were also performed. The results indicated that the cryo-treated specimens have better corrosion resistance when compared to the annealed ones. Weld region on both specimens exhibited better corrosion resistance when compared to other zones.