The miscellaneous applications of terahertz have called for an urgent demand of a super intense terahertz source. Here, we demonstrate the capability of femtosecond laser-driven wires as an efficient ultra-intense terahertz source using 700 mJ laser pulses. When focused onto a wire target, coherent THz generation took place in the miniaturized gyrotron-like undulator where emitted electrons move in the radial electric field spontaneously created on wire surface. The single-cycle terahertz pulse generated from the target is measured to be radially polarized with a pulse energy of a few milijoule. By further applying this scheme to a wire-tip target, we show the near field of the 500 nm radius apex could reach up to 90 GV/m. This efficient THz energy generation and intense THz electric field mark a substantial improvement toward ultra-intense terahertz sources.
Terahertz radiation can provide unprecedented vistas in physical studies such as transient matter state control and advanced free-electron manipulation. Here, we present one feasible path towards high-repetition-rate, intense THz sources by combining the wire-based THz source on a consecutively running, wire-conveying tape design. The proof-of-principle experimental results show an upper 30 mW average THz power output under 1 kHz laser excitation, which presents the first high-repetition-rate, and most importantly, portable and application in handy THz source that is generated by solid plasmas. The generated THz pulses are characterized with a 0.3 THz center frequency and ∼0.3 THz bandwidth. We believe this tabletop laser-driven high-repetition-rate THz source will open a new door for THz and related interdisciplinary sciences.
We present an experimental study of electron collimation triggered by an ∼1 × 1018 W/cm2 laser pulse irradiated onto wire-like targets. The collimation effect is observed to vary with the laser intensity and target shape. From the resulting electron angular distributions obtained under different experimental conditions, we deduce that the collimated electron charge grows in proportion with the −1/2 power of wire diameters and the square of pulse energies. Numerical simulations are conducted to study the electron behavior's dependence on the transient field and experimental conditions and are found to reproduce the experimental features.
The influence of the preplasma on laser induced shockwave in the laser and aluminum-coated planar dielectric target interaction at vacuum has been investigated with the shadowgraphy method. While the laser irradiate on the aluminum-coated dielectric target at intensity of about 1017 W/cm2, the metallic layers absorb laser energy, evaporate and ionize into plasma, it is verified that the scale length of laser-produced plasma is dramatically dependent on the contrast ratio of femtosecond-laser while the main laser pulse energy is almost kept. The characteristics of laser induced shock wave in nanosecond time scale were studied. In the nanosecond time scale, shock wave is only observed in the case of relatively short plasma scale length. This result can be explained by the dissipation of the shock wave during its propagation in the preplasma. In addition, we performed numerical simulation with MULTI2D to get an insight into the propagation of shock wave in the overdense plasma [R. Ramis, J. Meyer-ter-Vehn, and J. Ramírez, Comput. Phys. Commun. 180, 977 (2009)].