Chung-Chih Lin

Prof. Chung-Chih Lin

National Formosa University, Douliu, Yunlin, Taiwan
orcid

Research Focus & Metrics

Academic Career Length

22Years (2005-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2015 in Micromachines
Verified
Journal Article
Open access
PDF file
YWYu-Jen Wang
Yu-Jen Wang
CCChung-De Chen
Chung-De Chen
CLChung-Chih Lin
Chung-Chih Lin
JYJui-Hsin Yu
Jui-Hsin Yu
The objective of this study is to develop and analyze a nonlinear suspended energy harvester (NSEH) that can be mounted on a rotating wheel. The device comprises a permanent magnet as a mass in the kinetic system, two springs, and two coil sets. The mass vibrates along the transverse direction because of the variations in gravitational force. This research establishes nonlinear vibration equations based on the resonance frequency variation of the energy harvester; these equations are used for analyzing the power generation and vibration of the harvester. The kinetic behaviors can be determined according to the stiffness in the two directions of the two suspended springs. Electromagnetic damping is examined to estimate the power output and effect of the kinematic behaviors on NSEH. The power output of the NSEH with a 52 Ω resistor connected in series ranged from approximately 30 to 4200 μW at wheel speeds that ranged from nearly 200 to 900 rpm.

27 October 2021 in BMC Gastroenterology
Verified
Journal Article
Open access
PDF file
CTChih-Wei Tseng
Chih-Wei Tseng
YHYu-Hsi Hsieh
Yu-Hsi Hsieh
CLChung-Chih Lin
Chung-Chih Lin
Malcolm KooMalcolm Koo
Malcolm Koo
FLFelix W. Leung
Felix W. Leung
Background: Underwater polypectomy without the need for submucosal injection has been reported. A heat-sink effect by immersing the polyp in water was proposed but no such experiment has been performed to support the claim. We compared the temperature rise on the serosal side during polypectomy between air- and water-filled colon. Method: Freshly harvested porcine colons were placed in a metal tray with cautery electrode pad attached to its bottom. An upper endoscope was used with a cap and a rubber band mounted to the distal end. A mucosal site was randomly selected and identified on its serosal surface with a marker while suction was applied. Suction was applied again and a ligation band was applied to create a polyp. A cautery snare grasped the artificial polyp just below the band. An assistant placed the tip of a thermometer at the marked site on the serosal surface to record the baseline temperature before cautery and the highest temperature during polypectomy. Seven polypectomies in air and underwater were performed. Results: Mean (standard deviation) baseline temperature were 23.3 (0.6) °C and 23.4 (0.6) °C in the air and water groups, respectively. The maximum rise in temperature during polypectomy was 6.1 (4.5) °C and 1.4 (1.0) °C in the air and water groups, respectively (P = 0.004). Conclusions: The maximum temperature rise during polypectomy was significantly less when polypectomy was performed underwater, supporting the hypothesis that a heat-sink effect does exist during underwater polypectomy.

28 February 2009 in Solar Energy Materials and Solar Cells
Verified
Journal Article
Closed access
CLChi-Chang Liu
Chi-Chang Liu
YLYuan-Chang Liang
Yuan-Chang Liang
CKChin-Chiuan Kuo
Chin-Chiuan Kuo
YLYeuh-Yeong Liou
Yeuh-Yeong Liou
JCJia-Wen Chen
Jia-Wen Chen
CLChung-Chih Lin
Chung-Chih Lin

1 June 2008 in Thin Solid Films
Verified
Journal Article
Closed access
CKC.C. Kuo
C.C. Kuo
CLC.C. Liu
C.C. Liu
CLChung-Chih Lin
Chung-Chih Lin
YLY.Y. Liou
Y.Y. Liou
JHJ.L. He
J.L. He
FCF.S. Chen
F.S. Chen

20 September 2005 in Smart Materials and Structures
Verified
Journal Article
Closed access
CCC C Cheng
C C Cheng
CLChung-Chih Lin
Chung-Chih Lin

12 December 2022 in Polymers
Verified
Journal Article
Open access
PDF file
CLChung-Chih Lin
Chung-Chih Lin
TWTian-Cheng Wu
Tian-Cheng Wu
YCYu-Shiang Chen
Yu-Shiang Chen
BYBOYU YANG
BOYU YANG
Multi-cavity mold design is an efficient approach to achieving mass production and is frequently used in plastic injection applications. The runner system of a multi-cavity mold delivers molten plastic to each cavity evenly and makes the molded product from each individual cavity possess an equivalent quality. Not only the dimensions, but also the invisible quality, e.g., the internal stress of the product is of great concern in regard to molding quality. Using commercial software to find an optimal solution for the runner system may be time-consuming in respect to iterations if the engineers lack empirical rules. The H-type runner system is often used due to an inherently balanced filling in multi-cavities. However, the shear heat inducing an imbalanced flow behavior requires the H-type runner system to be improved as the number of the cavities is increased. This work develops a methodology based on the rheological concept to determine the runner system of a multi-cavity mold semi-analytically. As the relation of the viscosity with respect to shear rate is known, the runner system can be constructed step-by-step via this method. The use of the proposed method helps to focus attention on the connection between the physical situation and its related mathematical model. The influences of the melt temperature and resin type can be easily investigated. Three design examples, a 16-cavity mold with a fishbone runner system, an 8-cavity mold with an arbitrary runner layout, and the influences of melt temperature and resin type on the runner design are demonstrated and validated by the commercial software. The proposed method shows its great benefit when a new runner design project is launched in the initial design stage and then cooperates with the commercial software for further modifications.