Contamination of drinking water by arsenic and fluoride is a global problem, as more than 300 million people in more than 100 countries have been affected by their presence. These elements are considered the most serious contaminants in drinking water and their removal is a worldwide concern. Therefore, the evaluation of three alternative approaches—electrocoagulation, adsorption by biomaterials, and adsorption by metal oxide magnetic nanoparticles (MNPs)—was performed for arsenic and fluoride removal from groundwater. Arsenic removal from synthetic and groundwater (well water) was accomplished with the three processes; meanwhile, fluoride removal from groundwater was only reported by two methods. The results indicate that an electrocoagulation process is a good option for As (>97%) and F (>90%) removal in co-occurrence; however, the operational conditions for the removal of both pollutants must be driven by those used for fluoride removal. As (80–83%) and F (>90%) removal with the biomaterials was also successful, even when the application objective was fluoride removal. Finally, MNPs (Co and Mn) were designed and applied only for arsenic removal and reached >95%. Factors such as the pH, the presence of interfering ions, and the initial concentration of the contaminants are decisive in the treatment process’s efficiency.
Arsenic in water is currently a global concern due to the long-term exposure that could affect human health. In this study, magnetic nanoparticles (MNPs), CoFe2O4, and MnFe2O4 were successfully synthesized and applied to remove arsenic (As) from water. The MNPs were characterized using different techniques, such as scanning electron microscope (SEM), Brunauer–Emmet–Teller (BET), and photoelectron spectroscopy (XPS). The nanoscale size and the specific surface area achieved a fast, selective, and high As adsorption capacity. MNPs have a mesoporous structure with a mean pore diameter of 5 nm and a mean particle size of 30 nm. The adsorption capacity of these MNPs was determined through kinetic and equilibrium experiments, multilayer adsorption that obeyed the Freundlich model equation was observed, and the maximum adsorption capacities reached were 250 mg/g for CoFe2O4 and 230 mg/g for MnFe2O4. Furthermore, MNPs characteristics like regeneration and reuse, several pH tolerances, non-ion interference, and effective As removal from groundwater samples confirms the nanomaterials’ potential for future applications in water treatment systems combined with magnetic separation.
About Me
Interest in related areas on biotechnology, nanotechnology (characterization of materials), nanomagnetism and water treatment
Interest in related areas on biotechnology, nanotechnology (characterization of materials), nanomagnetism and water treatment