In recent years, with the growth in the use of Unmanned Aerial Vehicles (UAVs), UAV-based systems have become popular in both military and civil applications. The lack of reliable communication infrastructure in these scenarios has motivated the use of UAVs to establish a network as flying nodes, also known as Flying Ad Hoc Networks (FANETs). However, the high mobility degree of flying and terrestrial users may be responsible for constant changes in the network topology, which makes more challenging to guarantee their communication during the operational time. In this context, this article presents a Softwaredefined networking (SDN) based Topology management for FANETs - called of STFANET -, which is a coordination protocol that englobes both an efficient SDN-based UAV communication and a set of topology management algorithms. The goal is to establish and maintain a FANET topology in order to provide a constant and reliable communication link among independent nodes - which are performing individual or collaborative missions - through relays units. Simulation results show the efficiency of the proposed protocol in order to provide communication in a dynamic scenario. Considering its use in a military setting, STFANET managed to achieve 25% of packet loss in transmitting data packets, 1.5ms of latency and 71% of connectivity on average.

Collaboration between multiple Unmanned Aerial Vehicles (UAVs) to set up a Flying Ad Hoc Network (FANET) is a growing trend since future applications claim for more autonomous and rapid deployable systems. The user experience on watching videos transmitted over FANETs should always be satisfactory even under influence of topology changes caused by the energy consumption of UAVs. In addition, the FANET must keep the UAVs cooperating as much as possible during a mission. However, one of the main challenges in FANET is how to mitigate the impact of limited energy resources of UAVs on the FANET operation in order to monitor the environment for a long period of time. In this sense, UAV replacement is required in order to avoid the premature death of nodes, network disconnections, route failures, void areas, and low-quality video transmissions. In addition, decision-making must take into account energy consumption associated with UAV movements, since they are generally quite energy-intensive. This article proposes a cooperative UAV scheme for enhancing video transmission and global energy efficiency called VOEI. The main goal of VOEI is to maintain the video with QoE support while supporting the nodes with a good connectivity quality level and flying for a long period of time. Based on an Software Defined Network (SDN) paradigm, the VOEI assumes the existence of a centrailized controller node to compute reliable and energy-efficiency routes, as well as detects the appropriate moment for UAV replacement by considering global FANET context information to provide energy-efficiency operations. Based on simulation results, we conclude that VOEI can effectively mitigate the energy challenges of FANET, since it provides energy-efficiency operations, avoiding network death, route failure, and void area, as well as network partitioning compared to state-of-the-art algorithm. In addition, VOEI delivers videos with suitable Quality of Experience (QoE) to end-users at any time, which is not achieved by the state-of-the-art algorithm.

Collaboration between multiple Unmanned Aerial Vehicles (UAVs) to establish a Flying Ad-hoc Network (FANET) is a growing trend since future applications claim for more autonomous and rapidly deployable systems. In this context, Software-Defined Networking FANET (SDN-FANET ) separates the control and data plane and provides network programmability, which considers a centralized controller to perform all FANET control functions based on global UAV context information, such as UAV positions, movement trajectories, residual energy, and others. However, control message dissemination in an SDN-FANET with low overhead and high performance is not a trivial task due to FANET particular characteristics, i.e., high mobility, failures in UAV to UAV communication, and short communication range. With this in mind, it is essential to predict UAV information for control message dissemination as well as consider hierarchical network architecture, reducing bandwidth consumption and signaling overhead. In this article, we present a Cluster-bAsed control Plane messages management in sOftware-defined flying ad-hoc NEtwork, called CAPONE. Based on UAV contextual information, the controller can predict UAV information without control message transmission. In addition, CAPONE divides the FANET into groups by computing the number of clusters using the Gap statistics method, which is input for a Fuzzy C-means method to determine the group leader and members. In this way, CAPONE reduces the bandwidth consumption and signaling overhead, while guaranteeing the control message delivering in FANET scenarios. Extensive simulations are used to show the gains of the CAPONE in terms of Packet Delivery Ratio, overhead, and energy compared to existing SDN-FANET architectures.

Considering that one of the goals of the future network generations is to provide ubiquitous communication in the most diverse scenarios to achieve high connection coverage, it is foreseen that the use of unmanned aerial vehicles as flying base stations (UAV-BSs) can potentially extend the network and communication range. UAVs as flying base station can bring the potential to assist user devices and vehicles by carrying communication resources that can accommodate clients that were not previously planned by the ground infrastructure design due to flash crowd events, sudden natural disasters, or any other event that let to an overloaded environment. Allocating UAVs as flying base station still poses significant challenges in their deployment and the effectiveness of information transmission through UAVs as flying base station in the context of wireless communication since it is necessary to deal with both wireless communication capability and interference in the presence of terrestrial infrastructures already present. Besides, it is essential to understand how communication resources affect network performance. This paper studies the feasibility of using UAVs as flying base station in the assistance of wireless communication in a scenario where there is a sudden demand for data transmission due to possible congestion of local infrastructure. We show how the number of communication resources provided by the UAV-BS, the interference caused by the presence of multiple next generation node Bs (gNBs), and the UAV as flying base station positioning affect the network performance. We also highlight the need for a better next generation node B (gNB) and UAVs placement criteria since the received signal power prevents the user equipments (UEs) from using most of the available resources.