Daniele Cirigliano

Mr. Daniele Cirigliano

German Aerospace Center, Cologne, North Rhine-Westphalia, Germany
orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2018 in Journal of Propulsion and Power
Verified
Journal Article
Closed access
Daniele CiriglianoDaniele Cirigliano
Daniele Cirigliano
AFAaron M. Frisch
Aaron M. Frisch
FLFeng Liu
Feng Liu
WSWilliam A. Sirignano
William A. Sirignano
Comparisons are made for propulsion systems for unmanned flights with several hundred kilowatts of propulsive power at moderate subsonic speeds up to 50 h in duration. Gas-turbine engines (turbofans and turboprops), two- and four-stroke reciprocating (diesel and spark-ignition) engines, and electric motors (with electric generation by a combustion engine) are analyzed. Thermal analyses of these engines are performed in the power range of interest. Consideration is given to two types of generic missions: 1) a mission dominated by a constant-power requirement, and 2) a mission with intermittent demand for high thrust and/or substantial auxiliary power. The weights of the propulsion system, required fuel, and total aircraft are considered. Nowadays, diesel engines for airplane applications are rarely a choice. However, this technology is shown to be a very serious competitor for long-duration unmanned air vehicle flights. The two strongest competitors are gas-turbine engines and turbocharged four-stroke diesel engines, each type driving propellers. It is shown that hybrid-electric schemes and configurations with several propellers driven by one power source are less efficient. At the 500 KW level, one gas-turbine engine driving a larger propeller is more efficient for durations up to 25 h, whereas several diesel engines driving several propellers become more efficient at longer durations. The decreasing efficiency of the gas-turbine engine with decreasing size and increasing compression ratio is a key factor.

13 January 2021 in Journal of Engineering for Gas Turbines and Power
Verified
Journal Article
Closed access
PDF file
OSOliver Schmitz
Oliver Schmitz
SKSascha Kaiser
Sascha Kaiser
HKHermann Klingels
Hermann Klingels
PKPetra Kufner
Petra Kufner
MOMartin Obermüller
Martin Obermüller
MHMirko Hornung
Mirko Hornung
Recognizing the attention currently devoted to the environmental impact of aviation, this three-part publication series introduces two new aircraft propulsion concepts for the timeframe beyond 2030. The first part focuses on the novel steam injecting and recovering aero engine concept. In the second part, the free-piston composite cycle engine (FP-CCE) concept is presented. Complementary to the two technical publications, this third part describes the cooperative project, which was initiated by an interdisciplinary consortium, aiming at the demonstration and the proof-of-concept of both aforementioned aero engine concepts. At the beginning of the project, simulations on propulsion, aircraft system, and test bench level will be conducted. On this basis, preliminary tests and fundamental experiments are planned in order to establish a solid basis for the demonstration. Finally, a system demonstration will be carried out at the laboratory level. Thus, the project allows for a final judgment on both the feasibility of the new concepts and the attainability of the requirements for future aircraft propulsion systems.

15 June 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Daniele CiriglianoDaniele Cirigliano
Daniele Cirigliano
FGFelix Grimm
Felix Grimm
PKPeter Kutne
Peter Kutne
MAManfred Aigner
Manfred Aigner
Currently, Micro Gas Turbines (MGTs) are widely used in small buildings, such as offices, hospitals, or households, in which electricity and thermal energy are needed. Their reliability, flexibility, and compactness allow these devices to operate in different regimes to fulfill the power demand. The opportunity to operate at partial-load is deeply investigated in this paper. To cope with the fast, unpredictable demand of energy, thermal storage and batteries are most commonly installed. The potential of these two components for the operating cost is also investigated in this paper in order to provide guidelines on their sizing. Moreover, the thermal and electrical energy demands depend on different factors such as building size, weather, day of the week, and location, all modeled in this work; the possibility to buy and feed electricity into the grid adds a further variable to the economic analysis. All these factors were considered in this study and led to the creation of an optimization algorithm, which was able to determine the optimal operating profile of the system for every single scenario. The operational optimization of a micro gas turbine, the MTT Enertwin, is presented. Data from experimental measurements were implemented in the algorithm in order to characterize the system performance. Concerning the input power demands, data for Germany according to the norm VDI 4655 were considered; hence, the results are formally limited to this region. However, considerations of batteries and thermal storage were broadly valid; also, the results can be of international interest in countries with a similar climate and habits. With this study, it is shown that the optimal operational strategy is in the vast majority of cases the full-load, with savings up to 20% with respect to partial-load. Furthermore, batteries between 1.5 and 2 kWh constitute the best compromise between installation costs and savings; the investment can be generally paid off in less than 3 years. Finally, a threshold of 400 L for thermal storage was identified.

9 June 2023 in Journal of the Global Power and Propulsion Society
Verified
Journal Article
Open access
Daniele CiriglianoDaniele Cirigliano
Daniele Cirigliano
HDHerol Lawerence D'SOuza
Herol Lawerence D'SOuza
FGFelix Grimm
Felix Grimm
PKPeter Kutne
Peter Kutne
MAManfred Aigner
Manfred Aigner
Micro Gas Turbines (MGTs) are nowadays largely used for electrical and thermal energy production in small buildings and households. Their reliability and compactness allow them to operate for thousands of hours with minimal maintenance. However, the long exposure at high temperatures in combustion chambers can promote creep, which can induce thermal fatigue and potential failure of these components. Creep-induced damage in MGTs has not yet been thoroughly investigated, due to the lack of numerical tools able to model these strongly coupled phenomena. This study presents the development of a Fortran-based subroutine integrated into ANSYS APDL. The code allows for a life assessment based on the Lemaitre-Chaboche creep damage model. Secondary creep and stress relaxation are modeled for the high-temperature resistant alloy Inconel718. A new set of temperature-dependent parameters for the Norton equation is provided, and the method to obtain these parameters from creep rupture tests is outlined. The model is validated and shows good agreement with experimental data. The subroutine correctly reproduces visco-plasticity, stress relaxation and damage under typical MGTs operating temperatures. This model constitutes the foundation of a life-assessment analysis for combustion chambers. The results highlight the impact of temperature and creep on the component’s life and the importance of integrating life assessment analysis into the preliminary design of combustion chambers.

21 September 2020
Verified
Conference Paper
Closed access
PDF file
Daniele CiriglianoDaniele Cirigliano
Daniele Cirigliano
FGFelix Grimm
Felix Grimm
PKPeter Kutne
Peter Kutne
MAManfred Aigner
Manfred Aigner
Modern Micro Gas Turbines must be capable to operate at different load points, in order to fulfill the demand of Combined Heat and Power for which they are designed. The combustion chamber structures are therefore subjected to regularly variable thermal loads, yet remaining physically constrained at the rest of the structure. Hence, they experience variable metal temperatures, temperature gradients and thermal stresses which can lead to thermal failure. Typical failure mechanisms in combustion chambers are fatigue and creep. Oxidation can also play an important role. In the present study, Computational Fluid Dynamics methods are used for validation of flow prediction, combustion and heat transfer of an atmospheric combustion chamber. Convective and radiative heat losses towards the ambient are specifically taken into account, leading to better agreement with experimental data from preceding studies. The comparison is presented in this paper. The real-scale machine-operated combustion chamber is then tested at its nominal high-pressure conditions. In this respect, the hereby validated numerical models are employed to simulate the high-pressure operation. A fully coupled Thermo-Structural analysis is performed in order to account for heat fluxes within the solid materials. By so doing, wall temperature distributions can be obtained. The results from Fluid Dynamics simulations serve as input for a Finite Elements Analysis, which provides equivalent stress, strain and deformation distributions by using a linear elastic mechanical model. Such distributions highlight the most critical areas, allowing a first estimate of the components’ life according to thermo-mechanical fatigue. The additional influence of Creep and Oxidation is currently under development at DLR Stuttgart and will be presented in subsequent works.

16 July 2021
Verified
Preprint
Open access
Daniele CiriglianoDaniele Cirigliano
Daniele Cirigliano
FGFelix Grimm
Felix Grimm
PKPeter Kutne
Peter Kutne
MAManfred Aigner
Manfred Aigner
Modern Micro Gas Turbines (MGT) must be capable to operate at different regimes, in order to fulfill the demand of Combined Heat and Power (CHP) for which they are designed. The combustion chamber walls are subjected to regularly variable thermal loads, yet remaining physically constrained at the rest of the structure. Hence, they experience variable metal temperatures, temperature