The combined effects of gravitational forces and wettability on displacement and trapping have not previously been investigated experimentally in realistic 2D porous media. Here we report the first use of representative 2D micromodels that accurately reproduce characteristic geometric, morphological, and topological properties of 3D sand packs. We use these representative micromodels to compare the wettability dependence of displacement front morphology and trapping processes using selected fluid pairs at capillary numbers between 10−6 and 10−5. The contact angles studied ranged from 30° (normal imbibition) to 150° (strong drainage). The impact of gravity was dramatic: In the horizontal flow case, only one finger developed, that is longitudinal displacement was always favored, whereas gravity created a more compact displacement front with broad lateral extension, and this lateral movement created loops, leading to by‐pass trapping. As a result, the trapping efficiency rose from 7% to 29%. We observed universal scaling of the cluster size distribution demonstrating that our micromodels are statistically representative. The universal 2D‐scaling exponent of 2.05 was obtained with an acceptable error smaller than 5%. Our experimental results obtained by fluorescence microscopy showed (a) precursor corner flow for weak imbibition at θ = 51°, that is above the critical contact angle of αc = 45° (Zhao et al., 2016, https://doi.org/10.1073/pnas.1603387113), and (b) a new wetting transition from corner flow to full duct flow under neutral wettability conditions, that is at θc ≈ 90°; and (c) above this second critical contact angle, that is under strong drainage conditions, we again observed corner flow (specifically, core‐annular flow).
Understanding how different flow patterns emerge at various macro‐ and pore scale heterogeneity, pore wettability and surface roughness is remains a long standing scientific challenge. Such understanding allows to predict the amount of trapped fluid left behind, of crucial importance to applications ranging from microfluidics and fuel cells to subsurface storage of carbon and hydrogen. We examine the interplay of wettability and pore‐scale heterogeneity including both pore angularity and roughness, by a combination of micro‐CT imaging of 3D grain packs with direct visualization of 2D micromodels. The micromodels are designed to retain the key morphological and topological properties derived from the micro‐CT images. Different manufacturing techniques allow us to control pore surface roughness. We study the competition between flow through the pore centers and flow along rough pore walls and corners in media of increasing complexity in the capillary flow regime. The resulting flow patterns and their trapping efficiency are in excellent agreement with previous μ‐CT results. We observe different phase transitions between the following flow regimes (phases): (a) Frontal/compact advance, (b) wetting and drainage Invasion percolation, and (c) Ordinary percolation. We present a heterogeneity‐wettability‐roughness phase diagram that predicts these regimes.
Improved hearing restoration by cochlear implants (CI) is expected by optical cochlear implants (oCI) exciting optogenetically modified spiral ganglion neurons (SGNs) via an optical pulse generated outside the cochlea. The pulse is guided to the SGNs inside the cochlea via flexible polymer-based waveguide probes. The fabrication of these waveguide probes is realized by using 6” wafer-level micromachining processes, including lithography processes such as spin-coating cladding layers and a waveguide layer in between and etch processes for structuring the waveguide layer. Further adhesion layers and metal layers for laser diode (LD) bonding and light-outcoupling structures are also integrated in this waveguide process flow. Optical microscope and SEM images revealed that the majority of the waveguides are sufficiently smooth to guide light with low intensity loss. By coupling light into the waveguides and detecting the outcoupled light from the waveguide, we distinguished intensity losses caused by bending the waveguide and outcoupling. The probes were used in first modules called single-beam guides (SBGs) based on a waveguide probe, a ball lens and an LD. Finally, these SBGs were tested in animal models for proof-of-concept implantation experiments.
Network-based biocomputation (NBC) is an alternative, parallel computation approach that can potentially solve technologically important, combinatorial problems with much lower energy consumption than electronic processors. In NBC, a combinatorial problem is encoded into a physical, nanofabricated network. The problem is solved by biological agents (such as cytoskeletal filaments driven by molecular motors) that explore all possible pathways through the network in a massively parallel and highly energy-efficient manner. Whereas there is currently a rapid development in the size and types of problems that can be solved by NBC in proof-of-principle experiments, significant challenges still need to be overcome before NBC can be scaled up to fill a technological niche and reach an industrial level of manufacturing. Here, we provide a roadmap that identifies key scientific and technological needs. Specifically, we identify technology benchmarks that need to be reached or overcome, as well as possible solutions for how to achieve this. These include methods for large-scale production of nanoscale physical networks, for dynamically changing pathways in these networks, for encoding information onto biological agents, for single-molecule readout technology, as well as the integration of each of these approaches in large-scale production. We also introduce figures of merit that help analyze the scalability of various types of NBC networks and we use these to evaluate scenarios for major technological impact of NBC. A major milestone for NBC will be to increase parallelization to a point where the technology is able to outperform the current run time of electronic processors. If this can be achieved, NBC would offer a drastic advantage in terms of orders of magnitude lower energy consumption. In addition, the fundamentally different architecture of NBC compared to conventional electronic computers may make it more advantageous to use NBC to solve certain types of problems and instances that are easy to parallelize. To achieve these objectives, the purpose of this roadmap is to identify pre-competitive research domains, enabling cooperation between industry, institutes, and universities for sharing research and development efforts and reducing development cost and time.
This paper is dedicated to the integration of photonic components into Micro-Electro-Mechanical Systems (MEMS) to develop high-performance inertial sensors, particularly for autonomous vehicle applications. Traditional MEMS sensors face limitations in electrical signal conversion. Optomechanical sensing, which couples mechanical motion with optical detection, offers enhanced sensitivity, reduced noise, and improved stability. By embedding optical components directly into the MEMS structure, we aim to address these advantages for improved performance, to be first demonstrated for a sensor/actuator test structure compatible for acceleration measurement. The paper describes in detail the design and fabrication process, incorporating electrostatic actuators, sensors and optical ring resonators into OptoMEMS. Comprehensive simulations use ANSYS Mechanical for mechanical and electrostatic part with a coupling to ANSYS Lumerical to convert mechanical deformations into optical resonance shifts. Preliminary fabrication and measurement results validate the simulation concept, demonstrating the feasibility of this integrated optomechanical approach.