Christian Helke

Dr. Christian Helke

orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
22 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
CHChristian Helke
Christian Helke
MRMarkus Reinhardt
Markus Reinhardt
MAMarkus Arnold
Markus Arnold
FSFalk Schwenzer
Falk Schwenzer
MHMicha Haase
Micha Haase
DRDanny Reuter
Danny Reuter
Improved hearing restoration by cochlear implants (CI) is expected by optical cochlear implants (oCI) exciting optogenetically modified spiral ganglion neurons (SGNs) via an optical pulse generated outside the cochlea. The pulse is guided to the SGNs inside the cochlea via flexible polymer-based waveguide probes. The fabrication of these waveguide probes is realized by using 6” wafer-level micromachining processes, including lithography processes such as spin-coating cladding layers and a waveguide layer in between and etch processes for structuring the waveguide layer. Further adhesion layers and metal layers for laser diode (LD) bonding and light-outcoupling structures are also integrated in this waveguide process flow. Optical microscope and SEM images revealed that the majority of the waveguides are sufficiently smooth to guide light with low intensity loss. By coupling light into the waveguides and detecting the outcoupled light from the waveguide, we distinguished intensity losses caused by bending the waveguide and outcoupling. The probes were used in first modules called single-beam guides (SBGs) based on a waveguide probe, a ball lens and an LD. Finally, these SBGs were tested in animal models for proof-of-concept implantation experiments.

11 November 2023 in Nanomaterials
Verified
Journal Article
Open access
PDF file
FFFlorian Frank
Florian Frank
SBSimon Böttger
Simon Böttger
Nico MexisNico Mexis
Nico Mexis
Nikolaos Athanasios AnagnostopoulosNikolaos Athanasios Anagnostopoulos
Nikolaos Athanasios Anagnostopoulos
AMAli Mohamed
Ali Mohamed
SHSascha Hermann
Sascha Hermann
In this work, we explored a highly robust and unique Physical Unclonable Function (PUF) based on the stochastic assembly of single-walled Carbon NanoTubes (CNTs) integrated within a wafer-level technology. Our work demonstrated that the proposed CNT-based PUFs are exceptionally robust with an average fractional intra-device Hamming distance well below 0.01 both at room temperature and under varying temperatures in the range from 23 ∘C to 120 ∘C. We attributed the excellent heat tolerance to comparatively low activation energies of less than 40 meV extracted from an Arrhenius plot. As the number of unstable bits in the examined implementation is extremely low, our devices allow for a lightweight and simple error correction, just by selecting stable cells, thereby diminishing the need for complex error correction. Through a significant number of tests, we demonstrated the capability of novel nanomaterial devices to serve as highly efficient hardware security primitives.

27 February 2025 in Journal of Vacuum Science & Technology A
Verified
Journal Article
Open access
MFMathias Franz
Mathias Franz
LJLinda Jäckel
Linda Jäckel
XHXiao Hu
Xiao Hu
LKLysann Kaßner
Lysann Kaßner
CTCamilla Thurm
Camilla Thurm
SSStefan E. Schulz
Stefan E. Schulz
This work presents the development and implementation of a low-temperature atomic layer deposition (ALD) process for metallic cobalt thin films. The works are based on a set of five different Co precursors with alkyne ligands. Computational analysis identified CoCOhept([Co2(CO)6HC≡CC5H11]) as the most promising candidate among a series of potential precursors. Using density functional theory calculations, we examined the surface chemistry of Co2(CO)6HC≡CCH3 during Co ALD. The precursor undergoes dissociative adsorption on Co(001), followed by efficient ligand removal via a hydrogenation reaction with surface H atoms. Simultaneously to the process development with CoCOhept, the chamber geometry has been co-optimized using computational fluid dynamics simulation. By this, the chamber height was identified as a critical factor for a homogenous precursor distribution. We show that a minimum height is mandatory in order to avoid local concentration hot-spots under the gas inlets. The predictions by the model are in good agreement with experiments employing varying chamber geometries. Further experimental tests show the influence of the precursor flow and the plasma pulse duration. We demonstrate the integration of the process in high aspect-ratio silicon structures and on temperature sensitive 3D-photoresist structures.

29 February 2024 in Micro
Verified
Journal Article
Open access
PDF file
CBChristian Behl
Christian Behl
RBRegine Behlert
Regine Behlert
JSJan Seiler
Jan Seiler
CHChristian Helke
Christian Helke
Alexey ShaporinAlexey Shaporin
Alexey Shaporin
KHKarla Hiller
Karla Hiller
Thin metal layers such as silver (Ag) are being utilized for various optical and plasmonic applications as well as for electrical purposes, e.g., as transparent electrodes in display devices or solar cells. This paper focuses on optical MEMS applications such as the Fabry–Pérot interferometer (FPI). Within such filters, reflector materials such as distributed Bragg reflectors (DBRs) or subwavelength gratings (SWGs) have been widely used so far, whereas metallic thin films (MTFs) were limited in application due to their comparatively higher absorption. In this paper, thin sputtered Ag layers with thicknesses of 20, 40 and 60 nm on glass substrates have been investigated, and it is shown that the absorption is very low in the visible spectral range (VIS) and increases only in near-infrared (NIR) with increasing wavelength. Thus, we consider Ag-thin layers to be an interesting reflector material at least for the VIS range, which can be easily fabricated and integrated. However, Ag is not inert and stable when exposed to the atmosphere. Hence, it needs a passivation material. For this purpose, AlN has been chosen in this contribution, which can be deposited by sputtering as well. In this contribution, we have chosen thin AlN layers for this purpose, which can also be deposited by sputtering. Thus, various AlN/Ag/AlN-reflector stacks were created and patterned by lift-off technology preferably. The fabricated reflectors were characterized with respect to adhesion, stress, cohesion, homogeneity, and most importantly, their optical properties. It was found that the thickness of the AlN can be used to adjust the reflectance–transmittance ratio in the VIS range, and influences the adsorption in the NIR range as well. Based on the measured values of the reflectors with 40 nm Ag, an exemplary transmission filter characteristics has been predicted for a wavelength range from 400 to 800 nm. Both the maximum transmittance and the full width at half maximum (FWHM) can be tuned by variation of the AlN thickness from 20 to 60 nm.

22 October 2024 in Journal of Vacuum Science & Technology B
Verified
Journal Article
Closed access
PDF file
JBJens Bonitz
Jens Bonitz
CHChristian Helke
Christian Helke
NDNils Dittmar
Nils Dittmar
SSSebastian Schermer
Sebastian Schermer
MHMicha Haase
Micha Haase
DRDanny Reuter
Danny Reuter
Microlenses are a suitable approach to improve the performance of optical systems. An important optical efficiency determining parameter is the fill factor, which describes the relation of the lens area to the total optical active area. In this work, an optimization of the fill factor by optimizing the fabrication process steps is presented. The approach here is the use of i-line waferstepper lithography in combination with thermal reflow of photoresist and subsequent 1:1 pattern transfer in the lens material by reactive ion etching. For this method, the fill factor is determined by the minimum lens gap and, thus, the optical efficiency is strongly limited by the resolution limit of the i-line waferstepper lithography (350 nm). The goal of this investigation is to achieve the lowest possible lens gap even below the stepper-based resolution limit by optimizing each single process step without developing a new approach. The final result of the optimization was a fill factor improvement of 15%.