David Gacio

Dr. David Gacio

orcid
Associate Professor

Research Focus & Metrics

Academic Career Length

19Years (2008-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
29 March 2010 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
David GacioDavid Gacio
David Gacio
JAJ. Marcos Alonso
J. Marcos Alonso
ACAntonio Javier Calleja
Antonio Javier Calleja
Jorge GarciaJorge Garcia
Jorge Garcia
MRManuel Rico-Secades
Manuel Rico-Secades
Due to the high rise in luminous efficiency that high-brightness light-emitting diodes (HB-LEDs) have experienced in recent years, many new applications have been researched. This paper covers a streetlight LED application using the offline integrated buck-flyback converter (IBFC) developed in previous works. In this application, the converter is used to provide power-factor correction from a universal ac source. A control loop using the LM3524 IC has been implemented for testing the feasibility of Enabling pulsewidth modulation dimming mode. First, the LED load has been linearized and modeled in order to calculate the IBFC topology properly. Second, the converter has been designed and tested at the laboratory. The converter has also been modeled in order to design a fixed-frequency constant-current control. The dynamics of all the stages involved in the closed loop have been taken into account in order to develop an adequate controller. Finally, the experimental results obtained from the laboratory tests are discussed.

22 March 2011 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
David GacioDavid Gacio
David Gacio
JAJ. Marcos Alonso
J. Marcos Alonso
Jorge GarciaJorge Garcia
Jorge Garcia
LCLidia Campa
Lidia Campa
MCMario J. Crespo
Mario J. Crespo
MRManuel Rico-Secades
Manuel Rico-Secades
This paper deals with the capability of pulse width modulation (PWM) dimming operation added to the high-power factor-integrated buck-flyback converter (IBFC), which was developed in previous works for LED lighting applications. First, the two main dimming techniques will be introduced, namely, analog dimming and PWM dimming. Then, the three main PWM dimming schemes found in the literature, that is, enable dimming, series dimming, and parallel dimming, will be briefly discussed. Afterwards, the IBFC topology will be tested performing both analog and enable dimming. In addition, a new proposal is introduced: the high-frequency series PWM dimming technique, which overcomes all the challenges faced when developing PWM dimming capabilities in low slew-rate constant-current fixed-frequency-controlled converters and offers all the advantages of PWM dimming over analog dimming while maintaining good efficiency. The proposed dimming-technique control loop, as well as the laboratory tests, will be presented, discussed, and compared to analog dimming and PWM dimming, showing satisfactory results in terms of dimming ratio, input current total harmonic distortion (THDI), and power factor.

1 February 2009
Verified
Conference Paper
Closed access
David GacioDavid Gacio
David Gacio
JAJ. M. Alonso
J. M. Alonso
ACAntonio Javier Calleja
Antonio Javier Calleja
Jorge GarciaJorge Garcia
Jorge Garcia
MRManuel Rico-Secades
Manuel Rico-Secades
Due to the high rise in luminous efficiency that HB-LEDs have experienced in the last recent years, many new applications have been researched. In this paper, a streetlight LED application will be covered, using the integrated buck-flyback converter developed in previous works, which performs power factor correction (PFC) from a universal AC source, as well as a control loop using the LM3524 IC, which allows PWM dimming operation mode. Firstly, the LED load will be linearized and modeled in order to calculate the IBFC topology properly. Afterwards, the converter will be calculated, presenting the one built in the lab. Secondly, the converter will be modeled in order to build the closed loop system, modeling the current sensor as well in order to develop an adequate controller. Finally, experimental results obtained from the lab tests will be presented.

25 January 2013 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
David GacioDavid Gacio
David Gacio
JAJ. Marcos Alonso
J. Marcos Alonso
Jorge GarciaJorge Garcia
Jorge Garcia
MPMarina M. S. Perdigão
Marina M. S. Perdigão
ESE. Sousa Saraiva
E. Sousa Saraiva
Fabio BisognoFabio Bisogno
Fabio Bisogno
This paper deals with the thermal characteristics of the I -V curve of GaN-based white light-emitting diodes (LEDs), focused on the variations of the dynamic resistance. The final goal of this study is to improve the static and dynamic operations of the LED driver within a wide range of temperatures. Four LEDs from different manufacturers were chosen for this study. The first part of this paper shows the thermal characterization of the forward voltage at a given injected current. After that, the experimental data are fitted in order to calculate the junction temperature accurately. Then, a small-signal analysis where the LEDs are supplied with dc current and an ac perturbation superimposed at the operation point under variable junction temperature is covered. This analysis allows the dynamic resistance to be experimentally determined for a wide junction temperature range. Furthermore, the experimental data have been fitted in order to establish the relationship between junction temperature and dynamic-resistance variation, so the dynamic resistance can be determined for a given operation point. Finally, an illustrative example is presented as a case study in order to analyze the implications of the dynamic resistance on the output-current ripple and on the closed-loop operation of a LED driver. The experimental results confirm that the junction temperature shift induces a variation in the dynamic resistance, which might have a significant effect on the output-current ripple and closed-loop performance in certain LED fixtures.

1 October 2012
Verified
Conference Paper
Closed access
JAJ. M. Alonso
J. M. Alonso
David GacioDavid Gacio
David Gacio
ACAntonio Javier Calleja
Antonio Javier Calleja
FSF. Sichirollo
F. Sichirollo
MSM. F. da Silva
M. F. da Silva
RPR. N. Do Prado
R. N. Do Prado
In this paper a new technique to reduce the LED current ripple and storage capacitance in high power factor (PF) off-line LED power supplies is investigated. The proposed methodology is based on the use of integrated power converters (IPC) to implement the power supply. Thus, the first stage operates in discontinuous conduction mode (DCM) to provide high PF. The second stage can be operated in either continuous conduction mode (CCM) or DCM. A family of IPCs is proposed to be used as LED lamp power supplies. A generalized analysis is carried out in order to obtain the important design equations and conditions. Finally, an example of an IPC is given, along with some experimental results to demonstrate the effectiveness of the proposed technique.

23 July 2012 in IEEE Transactions on Industry Applications
Verified
Journal Article
Closed access
JAJ. Marcos Alonso
J. Marcos Alonso
David GacioDavid Gacio
David Gacio
ACAntonio Javier Calleja
Antonio Javier Calleja
Javier RibasJavier Ribas
Javier Ribas
ECEmilio López Corominas
Emilio López Corominas
In this paper, a study on LED retrofit solutions for low-voltage halogen cycle lamps is conducted. In the first part of this paper, a lamp based on a LED array is designed to operate in substitution of a 12-V/50-W halogen lamp, for lighting fixtures in which these lamps are supplied using a line transformer. The design includes the selection of an adequate LED array in terms of lumen output and color temperature and the calculation of the necessary heatsink to assure the correct operation of the LED lamp within the selected temperature range. In the second part of this paper, a passive converter based on a bridge rectifier and a limiting resistance is studied and tested in the laboratory. Next, an active solution based on a buck-boost converter operating in discontinuous conduction mode is designed and experimentally evaluated. Finally, a comparison in terms of input power factor, input current harmonic content, LED current ripple, LED current regulation, efficiency, and photometric characteristics is carried out.