Multi-Access Edge Computing (MEC) will allow implementing low-latency services that have been unfeasible so far. The European Telecommunications Standards Institute (ETSI) and the 3rd Generation Partnership Project (3GPP) are working towards the standardization of MEC in 5G networks and the corresponding solutions for routing user traffic to applications in local area networks. Nevertheless, there are neither practical implementations for dynamically relocating applications from the core to a MEC host nor from one MEC host to another ensuring service continuity. In this article we propose a solution based on Software-Defined Networking (SDN) to create a new instance of the IP anchor point to dynamically redirect User Equipment (UE) traffic to a new physical location (e.g., an edge infrastructure). We also present a novel approach that leverages SDN to replicate the previous context of the connection in the new instance of the IP anchor point, thus guaranteeing Session and Service Continuity (SSC), and compare it with alternative state replication strategies. This approach can be used to implement edge services in 4G or 5G networks.

Wireless connectivity is essential for industrial production processes and workflow management. Moreover, the connectivity requirements of industrial devices, which are usually long-term investments, are diverse and require different radio interfaces. In this regard, the 3GPP has studied how to support heterogeneous radio access technologies (RATs) such as Wi-Fi and unlicensed cellular technologies in 5G core networks. In some cases, these technologies coexist in the same spectrum. Dynamic spectrum sharing (DSS), which has already been proven to increase spectrum efficiency in licensed bands, can also be applied to this scenario. In this paper, we propose two solutions for mobile network operators (MNOs) or service providers to dynamically divide (multiplex) the radio resources of a shared channel between a Wi-Fi basic service set (BSS) and one or several carriers of scheduled wireless networks, such as cellular technologies, with a configurable level of sharing granularity. These solutions do not require modifications to the current commercial off-the-shelf (COTS) end devices. We adapt the existing IEEE 802.11 procedures to notify the Wi-Fi stations that they must share channels with different access networks. We demonstrate that our dynamic sharing proposals are also advantageous over direct coexistence and evaluate each of them quantitatively and qualitatively to determine when one or the other is preferable. The evaluation is particularized for IEEE 802.11ac and long-term evolution (LTE) license assisted access (LAA), but the solutions can be easily extended to 5G new radio-unlicensed (5G NR-U) or to any other wireless technology in which the network side schedules end device transmissions.

Drones may be more advantageous than fixed cameras for quality control applications in industrial facilities, since they can be redeployed dynamically and adjusted to production planning. The practical scenario that has motivated this paper, image acquisition with drones in a car manufacturing plant, requires drone positioning accuracy in the order of 5 cm. During repetitive manufacturing processes, it is assumed that quality control imaging drones will follow highly deterministic periodic paths, stop at predefined points to take images and send them to image recognition servers. Therefore, by relying on prior knowledge about production chain schedules, it is possible to optimize the positioning technologies for the drones to stay at all times within the boundaries of their flight plans, which will be composed of stopping points and the paths in between. This involves mitigating issues such as temporary blocking of line-of-sight between the drone and any existing radio beacons; sensor data noise; and the loss of visual references. We present a self-corrective solution for this purpose. It corrects visual odometer readings based on filtered and clustered Ultra-Wide Band (UWB) data, as an alternative to direct Kalman fusion. The approach combines the advantages of these technologies when at least one of them works properly at any measurement spot. It has three method components: independent Kalman filtering, data association by means of stream clustering and mutual correction of sensor readings based on the generation of cumulative correction vectors. The approach is inspired by the observation that UWB positioning works reasonably well at static spots whereas visual odometer measurements reflect straight displacements correctly but can underestimate their length. Our experimental results demonstrate the advantages of the approach in the application scenario over Kalman fusion, in terms of stopping point detection and trajectory estimation error.

The unstoppable adoption of the Internet of Things (IoT) is driven by the deployment of new services that require continuous capture of information from huge populations of sensors, or actuating over a myriad of “smart” objects. Accordingly, next generation networks are being designed to support such massive numbers of devices and connections. For example, the 3rd Generation Partnership Project (3GPP) is designing the different 5G releases specifically with IoT in mind. Nevertheless, from a security perspective this scenario is a potential nightmare: the attack surface becomes wider and many IoT nodes do not have enough resources to support advanced security protocols. In fact, security is rarely a priority in their design. Thus, including network-level mechanisms for preventing attacks from malware-infected IoT devices is mandatory to avert further damage. In this paper, we propose a novel Software-Defined Networking (SDN)-based architecture to identify suspicious nodes in 4G or 5G networks and redirect their traffic to a secondary network slice where traffic is analyzed in depth before allowing it reaching its destination. The architecture can be easily integrated in any existing deployment due to its interoperability. By following this approach, we can detect potential threats at an early stage and limit the damage by Distributed Denial of Service (DDoS) attacks originated in IoT devices.

Next-generation cellular networks will play a key role in the evolution of different vertical industries. Low latency will be a major requirement in many related uses cases. This requirement is specially challenging in scenarios with high mobility of end devices, such as vehicular communications. The Multi-Access Edge Computing (MEC) paradigm seeks to satisfy it. In this paper we propose the dynamic deployment of anchor point network functions at edge locations and the assignment of terminals to these anchor points with the joint objective of minimizing communications latency and reducing network overhead. We formally define the problem as a multi-objective optimization and also propose a novel heuristic greedy algorithm for approximating the solution. This algorithm compares favorably with baseline and state-of-the-art strategies for latency minimization while reducing the overhead caused by network reconfigurations.

Mobile core networks handle critical control functions for delivering services in modern cellular networks. Traditional point-to-point architectures, where network functions are directly connected through standardized interfaces, are being substituted by service-based architectures (SBAs), where core functionalities are finer-grained microservices decoupled from the underlying infrastructure. In this way, network functions and services can be distributed, with scaling and fail-over mechanisms, and can be dynamically deployed, updated, or removed to support slicing. A myriad of network functions can be deployed or removed according to traffic flows, thereby increasing the complexity of connection management. In this context, 3GPP Release 16 defines the service communication proxy (SCP) as a unified communication interface for a set of network functions. In this paper, we propose a novel software-defined networking (SDN)-based solution with the same role for a service mesh architecture where network functions can be deployed anywhere in the infrastructure. We demonstrated its efficiency in comparison with alternative architectures.