KANAK KALITA

Dr. KANAK KALITA

Mechanical Engineering, Vel Tech Rangarajan Dr. Sagunthala R&D Institute of Science and Technology, Chennai, India
orcid

Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 November 2021 in Processes
Verified
Journal Article
Open access
PDF file
DSDr.G.Shanmuga Sundar
Dr.G.Shanmuga Sundar
MVM. Vanitha
M. Vanitha
Robert ČepRobert Čep
Robert Čep
VKVikas Kumar
Vikas Kumar
KANAK KALITAKANAK KALITA
KANAK KALITA
RMRamachandran Manickam
Ramachandran Manickam
Non-traditional machining (NTM) has gained significant attention in the last decade due to its ability to machine conventionally hard-to-machine materials. However, NTMs suffer from several disadvantages such as higher initial cost, lower material removal rate, more power consumption, etc. NTMs involve several process parameters, the appropriate tweaking of which is necessary to obtain economical and suitable results. However, the costly and time-consuming nature of the NTMs makes it a tedious and expensive task to manually investigate the appropriate process parameters. The NTM process parameters and responses are often not linearly related and thus, conventional statistical tools might not be enough to derive functional knowledge. Thus, in this paper, three popular machine learning (ML) methods (viz. linear regression, random forest regression and AdaBoost regression) are employed to develop predictive models for NTM processes. By considering two high-fidelity datasets from the literature on electro-discharge machining and wire electro-discharge machining, case studies are shown in the paper for the effectiveness of the ML methods. Linear regression is observed to be insufficient in accurately mapping the complex relationship between the process parameters and responses. Both random forest regression and AdaBoost regression are found to be suitable for predictive modelling of NTMs. However, AdaBoost regression is recommended as it is found to be insensitive to the number of regressors and thus is more readily deployable.

22 November 2021 in Processes
Verified
Journal Article
Open access
PDF file
NGN. GANESH
N. GANESH
Paras JainParas Jain
Paras Jain
ACAmitava Choudhury
Amitava Choudhury
PDPrasun Dutta
Prasun Dutta
KANAK KALITAKANAK KALITA
KANAK KALITA
Paolo BarsocchiPaolo Barsocchi
Paolo Barsocchi
In industrial piping systems, turbomachinery, heat exchangers etc., pipe bends are essential components. Computational fluid dynamics (CFD), which is frequently used to analyse the flow behaviour in such systems, provides extremely precise estimates but is computationally expensive. As a result, a computationally efficient method is developed in this paper by leveraging machine learning for such computationally expensive CFD problems. Random forest regression (RFR) is used as the machine learning algorithm in this work. Four different fluid flow characteristics (i.e., axial velocity, x-velocity, y-velocity and z-velocity) are studied in this work. The accuracy of the RFR models is assessed by using a number of statistical metrics such as mean-absolute error (MAE), mean-squared-error (MSE), root-mean-squared-error (RMSE), maximum error (Max.Error) and median error (Med.Error) etc. It is observed that the RFR models can produce considerable cost reductions in computing by surrogating the CFD model. Minor loss in estimation accuracy as compared to the CFD models is observed. While the magnitude of intricate flow characteristics such as the additional vortices are correctly predicted, some error in their location is observed.

20 February 2021 in Energies
Verified
Journal Article
Open access
PDF file
DGDr. Krishna Kumar Gupta
Dr. Krishna Kumar Gupta
KANAK KALITAKANAK KALITA
KANAK KALITA
RGRanjan Kumar Ghadai
Ranjan Kumar Ghadai
RMRamachandran Manickam
Ramachandran Manickam
Xiao-Zhi GaoXiao-Zhi Gao
Xiao-Zhi Gao
Owing to the ever-growing impetus towards the development of eco-friendly and low carbon footprint energy solutions, biodiesel production and usage have been the subject of tremendous research efforts. The biodiesel production process is driven by several process parameters, which must be maintained at optimum levels to ensure high productivity. Since biodiesel productivity and quality are also dependent on the various raw materials involved in transesterification, physical experiments are necessary to make any estimation regarding them. However, a brute force approach of carrying out physical experiments until the optimal process parameters have been achieved will not succeed, due to a large number of process parameters and the underlying non-linear relation between the process parameters and responses. In this regard, a machine learning-based prediction approach is used in this paper to quantify the response features of the biodiesel production process as a function of the process parameters. Three powerful machine learning algorithms—linear regression, random forest regression and AdaBoost regression are comprehensively studied in this work. Furthermore, two separate examples—one involving biodiesel yield, the other regarding biodiesel free fatty acid conversion percentage—are illustrated. It is seen that both random forest regression and AdaBoost regression can achieve high accuracy in predictive modelling of biodiesel yield and free fatty acid conversion percentage. However, AdaBoost may be a more suitable approach for biodiesel production modelling, as it achieves the best accuracy amongst the tested algorithms. Moreover, AdaBoost can be more quickly deployed, as it was seen to be insensitive to number of regressors used.

2 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
NGN. GANESH
N. GANESH
RSRajendran Shankar
Rajendran Shankar
Robert ČepRobert Čep
Robert Čep
SCShankar Chakraborty
Shankar Chakraborty
KANAK KALITAKANAK KALITA
KANAK KALITA
As the volume of data generated by information systems continues to increase, machine learning (ML) techniques have become essential for the extraction of meaningful insights. However, the sheer volume of data often causes these techniques to become sluggish. To overcome this, feature selection is a vital step in the pre-processing of data. In this paper, we introduce a novel K-nearest neighborhood (KNN)-based wrapper system for feature selection that leverages the iterative improvement ability of the weighted superposition attraction (WSA). We evaluate the performance of WSA against seven well-known metaheuristic algorithms, i.e., differential evolution (DE), genetic algorithm (GA), particle swarm optimization (PSO), flower pollination algorithm (FPA), symbiotic organisms search (SOS), marine predators’ algorithm (MPA) and manta ray foraging optimization (MRFO). Our extensive numerical experiments demonstrate that WSA is highly effective for feature selection, achieving a decrease of up to 99% in the number of features for large datasets without sacrificing classification accuracy. In fact, WSA-KNN outperforms traditional ML methods by about 18% and ensemble ML algorithms by 9%. Moreover, WSA-KNN achieves comparable or slightly better solutions when compared with neural networks hybridized with metaheuristics. These findings highlight the importance and potential of WSA for feature selection in modern-day data processing systems.

20 January 2024 in Scientific Reports
Verified
Journal Article
Open access
PDF file
KANAK KALITAKANAK KALITA
KANAK KALITA
JRJanjhyam Venkata Naga Ramesh
Janjhyam Venkata Naga Ramesh
LCLenka Cepova
Lenka Cepova
SPSundaram B. Pandya
Sundaram B. Pandya
PJPradeep Jangir
Pradeep Jangir
LALaith Abualigah
Laith Abualigah
The exponential distribution optimizer (EDO) represents a heuristic approach, capitalizing on exponential distribution theory to identify global solutions for complex optimization challenges. This study extends the EDO's applicability by introducing its multi-objective version, the multi-objective EDO (MOEDO), enhanced with elite non-dominated sorting and crowding distance mechanisms. An information feedback mechanism (IFM) is integrated into MOEDO, aiming to balance exploration and exploitation, thus improving convergence and mitigating the stagnation in local optima, a notable limitation in traditional approaches. Our research demonstrates MOEDO's superiority over renowned algorithms such as MOMPA, NSGA-II, MOAOA, MOEA/D and MOGNDO. This is evident in 72.58% of test scenarios, utilizing performance metrics like GD, IGD, HV, SP, SD and RT across benchmark test collections (DTLZ, ZDT and various constraint problems) and five real-world engineering design challenges. The Wilcoxon Rank Sum Test (WRST) further confirms MOEDO as a competitive multi-objective optimization algorithm, particularly in scenarios where existing methods struggle with balancing diversity and convergence efficiency. MOEDO's robust performance, even in complex real-world applications, underscores its potential as an innovative solution in the optimization domain. The MOEDO source code is available at:https://github.com/kanak02/MOEDO.

15 July 2022 in Processes
Verified
Journal Article
Open access
PDF file
GRGayathri Rajakumaran
Gayathri Rajakumaran
USUsharani Shola
Usharani Shola
Lenka CepovaLenka Cepova
Lenka Cepova
MRM Rajesh
M Rajesh
KANAK KALITAKANAK KALITA
KANAK KALITA
Predicting the mechanical properties of cement-based mortars is essential in understanding the life and functioning of structures. Machine learning (ML) algorithms in this regard can be especially useful in prediction scenarios. In this paper, a comprehensive comparison of nine ML algorithms, i.e., linear regression (LR), random forest regression (RFR), support vector regression (SVR), AdaBoost regression (ABR), multi-layer perceptron (MLP), gradient boosting regression (GBR), decision tree regression (DT), hist gradient boosting regression (hGBR) and XGBoost regression (XGB), is carried out. A multi-attribute decision making method called TOPSIS (technique for order of preference by similarity to ideal solution) is used to select the best ML metamodel. A large dataset on cement-based mortars consisting of 424 sample points is used. The compressive strength of cement-based mortars is predicted based on six input parameters, i.e., the age of specimen (AS), the cement grade (CG), the metakaolin-to-total-binder ratio (MK/B), the water-to-binder ratio (W/B), the superplasticizer-to-binder ratio (SP) and the binder-to-sand ratio (B/S). XGBoost regression is found to be the best ML metamodel while simple metamodels like linear regression (LR) are found to be insufficient in handling the non-linearity in the process. This mapping of the compressive strength of mortars using ML techniques will be helpful for practitioners and researchers in identifying suitable mortar mixes.