Conventional bitumen pavement is no longer suitable for handling increasing loads and weather variations, which cause road deterioration, Thus, the modification of bitumen has been suggested to counter this issue. This study provides a detailed assessment of various additives for modifying natural rubber-modified bitumen used in road construction. This work will focus on the use of additives with cup lump natural rubber (CLNR), which has recently started to gain attention among researchers, especially in rubber-producing countries such as Malaysia, Thailand and Indonesia. Furthermore, this paper aims to briefly review how the addition of additives or modifiers helps elevate the performance of bitumen by highlighting the significant properties of modified bitumen after the addition of modifiers. Moreover, the amount and method of application of each additive are discussed further to obtain the optimum value for future implementation. On the basis of past studies, this paper will review the utilisation of several types of additives, including polyphosphoric acid, Evotherm, mangosteen powder, trimethyl-quinoline and sulphur, and the application of xylene and toluene to ensure the homogeneity of the rubberised bitumen. Numerous studies were conducted to verify the performance of various types and compositions of additives, particularly in terms of physical and rheological properties. In general, additives enhance the properties of conventional bitumen. Future research should investigate CLNR because studies on its utilisation are limited.
Reinforced concrete deep beams (RCDBs) provide significant strength and serviceability for building structures. However, a simple, general, and universally accepted procedure for predicting their shear strength (SS) has yet to be established. This study proposes a novel data-driven approach to predicting the SS of RCDBs using an enhanced CatBoost (CB) model. For this purpose, a newly comprehensive database of RCDBs with shear failure, including 950 experimental specimens, was established and adopted. The model was developed through a customized procedure including feature selection, data preprocessing, hyperparameter tuning, and model evaluation. The CB model was further evaluated against three data-driven models (e.g., Random Forest, Extra Trees, and AdaBoost) as well as three prominent mechanics-driven models (e.g., ACI 318, CSA A23.3, and EU2). Finally, the SHAP algorithm was employed for interpretation to increase the model’s reliability. The results revealed that the CB model yielded a superior accuracy and outperformed all other models. In addition, the interpretation results showed similar trends between the CB model and mechanics-driven models. The geometric dimensions and concrete properties are the most influential input features on the SS, followed by reinforcement properties. In which the SS can be significantly improved by increasing beam width and concert strength, and by reducing shear span-to-depth ratio. Thus, the proposed interpretable data-driven model has a high potential to be an alternative approach for design practice in structural engineering.