Nuclear power and associated activities are never far from scrutiny, the apparent advantages of the technology are juxtaposed by the risk of incidents perceived as being catastrophic. If a major nuclear incident was to occur, an important aspect of the response management to any radionuclide release would be the need to rapidly establish the spatial distributions and quantities of these released radionuclides, their type in addition to their corresponding activity. The data received from surveys would directly inform evacuation plans, on-site incident management strategies as well as protecting both workforce and public from harm. The disaster at the Fukushima Daiichi Nuclear Power Plant in 2011 is perhaps the best example of the requirement for real time data collection to inform crucial decisions. Previous reviews of the event have observed that because the static on-site radiation detector network was destroyed by the 15 m high tsunami (following the magnitude 9.0 Great Tōhoku earthquake), it was not possible to immediately determine the radionuclide activity in the area and the danger presented to the responding workforce. Such preceding works have retrospectively highlighted the usefulness of unmanned aerial systems in providing real-time data within nuclear and non-nuclear settings. The establishment of an arbitrary 20 km exclusion zone surrounding the Fukushima Daiichi plant, with the displacement of over 150,000 people, has been viewed by many as an over-reaction – with many not having been required to be evacuated. This review examines and evaluates the previous as well as current work on aerial radiation monitoring and the future improvement that might be delivered by a combined three-dimensional (3D) radiation mapping platform. Combining detailed 3D topographical mapping with radiation surveying has powerful implications for the way that radiological contamination across a site might be measured and displayed in the future, both following radiological release events and in routine site monitoring.
In response to the Fukushima Daiichi Nuclear Power Plant accident, there has occurred the unabated growth in the number of airborne platforms developed to perform radiation mapping—each utilising various designs of a low-altitude uncrewed aerial vehicle. Alongside the associated advancements in the airborne system transporting the radiation detection payload, from the earliest radiological analyses performed using gas-filled Geiger-Muller tube detectors, modern radiation detection and mapping platforms are now based near-exclusively on solid-state scintillator detectors. With numerous varieties of such light-emitting crystalline materials now in existence, this combined desk and computational modelling study sought to evaluate the best-available detector material compatible with the requirements for low-altitude autonomous radiation detection, localisation and subsequent high spatial-resolution mapping of both naturally occurring and anthropogenically-derived radionuclides. The ideal geometry of such detector materials is also evaluated. While NaI and CsI (both elementally doped) are (and will likely remain) the mainstays of radiation detection, LaBr3 scintillation detectors were determined to possess not only a greater sensitivity to incident gamma-ray radiation, but also a far superior spectral (energy) resolution over existing and other potentially deployable detector materials. Combined with their current competitive cost, an array of three such composition cylindrical detectors were determined to provide the best means of detecting and discriminating the various incident gamma-rays.
In the immediate aftermath following a large-scale release of radioactive material into the environment, it is necessary to determine the spatial distribution of radioactivity quickly. At present, this is conducted by utilizing manned aircraft equipped with large-volume radiation detection systems. Whilst these are capable of mapping large areas quickly, they suffer from a low spatial resolution due to the operating altitude of the aircraft. They are also expensive to deploy and their manned nature means that the operators are still at risk of exposure to potentially harmful ionizing radiation. Previous studies have identified the feasibility of utilizing unmanned aerial systems (UASs) in monitoring radiation in post-disaster environments. However, the majority of these systems suffer from a limited range or are too heavy to be easily integrated into regulatory restrictions that exist on the deployment of UASs worldwide. This study presents a new radiation mapping UAS based on a lightweight (8 kg) fixed-wing unmanned aircraft and tests its suitability to mapping post-disaster radiation in the Chornobyl Exclusion Zone (CEZ). The system is capable of continuous flight for more than 1 h and can resolve small scale changes in dose-rate in high resolution (sub-20 m). It is envisaged that with some minor development, these systems could be utilized to map large areas of hazardous land without exposing a single operator to a harmful dose of ionizing radiation.
Airborne systems such as lightweight and highly portable unmanned aerial vehicles (UAVs) are becoming increasingly widespread in both academia and industry - with an ever-increasing range of applications, including (but not limited to), air quality sampling, wildlife monitoring and land-use mapping. In this work, high-resolution airborne photogrammetry obtained using a multi-rotor system operating at low survey altitudes, is combined with ground-based radiation mapping data acquired at an interim storage facility for wastes removed as part of the large-scale Fukushima clean-up program. The investigation aimed to assess the extent to which the remediation program at a specific site has contained the stored contaminants, as well as present a new methodology for rapidly surveying radiological sites globally. From the three-dimensional rendering of the site of interest, it was possible to not only generate a powerful graphic confirming the elevated radiological intensity existing at the location of the waste bags, but also to also illustrate the downslope movement of contamination due to species leakage from the large 1m3 storage bags. The entire survey took less than 1 h to perform, and was subsequently post-processed using graphical information software to obtain the renderings. The conclusions within this study not only highlight the usefulness of incorporating three-dimensional renderings within radiation mapping protocols, but also conclude that current methods of monitoring these storage facilities in the long term could be improved through the integration of UAVs within the standard protocol.
An ever-increasing global population and unabating technological growth have resulted in a relentless appetite for mineral resources, namely rare earth elements, fuel minerals and those utilised in electronics applications, with the price of such species continuing to climb. In contrast to more established large-scale and high-cost exploration methodologies, this work details the application of novel multi-rotor unmanned aerial vehicles equipped with miniaturised radiation detectors for the objective of undertaking resource exploration at lower costs, with greater autonomy and at considerably enhanced higher spatial resolutions; utilizing the ore material’s inherent low levels of characteristic radioactivity. As we demonstrate at the former Wooley Mine site in Arizona, USA, a legacy Cu/Fe prospect where the 600 by 275 m ore body (with a maximum deposit depth of 150 m), it is shown that such a fusion of commercially available low-altitude multi-rotor aerial technology combined with cutting-edge micro-electronics and detector materials is capable of accurately assessing the spatial distribution and associated radiogenic signatures of commercially valuable surface/near-surface ore bodies. This integrated system, deployed at an autonomously controlled consistent survey altitude and using constant grid transects/separations, is shown to be able to delineate the mineral-containing ore deposits on the site, the location(s) of former mine workings and other surface manifestations. Owing to its advantageous costs alongside its ease of operation and subsequent data-processing, through the adoption of this system, it is envisaged that less economically developed countries would now possess the means through which to evaluate and appropriately quantify their mineral wealth without the significant initial expenditure needed to equip themselves with otherwise prohibitively expensive technologies.
The clean-up effort that is occurring across the region affected by the 2011 Fukushima Daiichi Nuclear Power Plant accident is unprecedented in its magnitude as well as the financial cost that will eventually result. A major component of this remediation is the stripping of large volumes of material from the land surface, depositing this into large waste storage bags before placing these 1 cubic meter bags into specially constructed stores across Fukushima Prefecture. In this work, using an unmanned aerial vehicle to perform radiological surveys of a site, the time-resolved distribution of contamination during the construction of one of these waste storage sites was assessed. The results indicated that radioactive material was progressively leaching from the store into the surrounding environment. A subsequent survey of the site conducted eight months later revealed that in response to this survey and remedial actions, the contamination issue once existing on this site had been successfully resolved. Such results highlight the potential of low-altitude unmanned aerial systems to easily and rapidly assess site-wide changes over time - providing highly-visual results; therefore, permitting for prompt remedial actions to be undertaken as required. Use of UAV radiation mapping and airborne photogrammetry to produce a time-resolved assessment of remediation efforts within a Fukushima temporary storage facility.