Eda Özdemir

Ms. Eda Özdemir

University of Kassel, Kassel, Hesse, Germany
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
31 March 2022 in Biomimetics
Verified
Journal Article
Open access
PDF file
Eda ÖzdemirEda Özdemir
Eda Özdemir
Nazanin SaeidiNazanin Saeidi
Nazanin Saeidi
Alireza JavadianAlireza Javadian
Alireza Javadian
ARAndrea Rossi
Andrea Rossi
NNNadja Nolte
Nadja Nolte
PEPhilipp Eversmann
Philipp Eversmann
The demand for building materials has been constantly increasing, which leads to excessive energy consumption for their provision. The looming environmental consequences have triggered the search for sustainable alternatives. Mycelium, as a rapidly renewable, low-carbon natural material that can withstand compressive forces and has inherent acoustic and fire-resistance properties, could be a potential solution to this problem. However, due to its low tensile, flexural and shear strength, mycelium is not currently widely used commercially in the construction industry. Therefore, this research focuses on improving the structural performance of mycelium composites for interior use through custom robotic additive manufacturing processes that integrate continuous wood fibers into the mycelial matrix as reinforcement. This creates a novel, 100% bio-based, wood-veneer-reinforced mycelium composite. As base materials, Ganoderma lucidum and hemp hurds for mycelium growth and maple veneer for reinforcement were pre-selected for this study. Compression, pull-out, and three-point bending tests comparing the unreinforced samples to the veneer-reinforced samples were performed, revealing improvements on the bending resistance of the reinforced samples. Additionally, the tensile strength of the reinforcement joints was examined and proved to be stronger than the material itself. The paper presents preliminary experiment results showing the effect of veneer reinforcements on increasing bending resistance, discusses the potential benefits of combining wood veneer and mycelium’s distinct material properties, and highlights methods for the design and production of architectural components.

26 July 2021 in Bioinspiration & Biomimetics
Verified
Journal Article
Open access
TCTiffany Cheng
Tiffany Cheng
DWDylan Wood
Dylan Wood
LKLaura Kiesewetter
Laura Kiesewetter
Eda ÖzdemirEda Özdemir
Eda Özdemir
KAKaren Antorveza
Karen Antorveza
AMAchim Menges
Achim Menges
We present a hybrid approach to manufacturing a new class of large-scale self-shaping structures through a method of additive fabrication combining fused granular fabrication (FGF) and integrated hygroscopic wood actuators (HWAs). Wood materials naturally change shape with high forces in response to moisture stimuli. The strength and simplicity of this actuation make the material suitable for self-shaping architectural-scale components. However, the anisotropic composition of wood, which enables this inherent behavior, cannot be fully customized within existing stock. On the other hand, FGF allows for the design of large physical parts with multi-functional interior substructures as inspired by many biological materials. We propose to encode passively actuated movement into physical structures by integrating HWAs within 3D-printed meta-structures with functionally graded stiffnesses. By leveraging robotic manufacturing platforms, self-shaping biocomposite material systems can be upscaled with variable resolutions and at high volumes, resulting in large-scale structures capable of transforming from flat to curved simply through changes in relative humidity.

22 September 2021
Verified
Conference Paper
Open access
PDF file
Eda ÖzdemirEda Özdemir
Eda Özdemir
LKL. Kiesewetter
L. Kiesewetter
KAK. Antorveza
K. Antorveza
TCT. Cheng
T. Cheng
SLS. Leder
S. Leder
AMA. Menges
A. Menges
Double curvature enables elegant and material-efficient shell structures, but their construction typically relies on heavy machining, manual labor, and the additional use of material wasted as one-off formwork. Using a material’s intrinsic properties for self-shaping is an energy and resource-efficient solution to this problem. This research presents a fabrication approach for self-shaping double-curved shell structures combining the hygroscopic shape-changing and scalability of wood actuators with the tunability of 3D-printed metamaterial patterning. Using hybrid robotic fabrication, components are additively manufactured flat and self-shape to a pre-programmed configuration through drying. A computational design workflow including a lattice and shell-based finite element model was developed for the design of the metamaterial pattern, actuator layout, and shape prediction. The workflow was tested through physical prototypes at centimeter and meter scales. The results show an architectural scale proof of concept for self-shaping double-curved shell structures as a resource-efficient physical form generation method.

3 March 2025 in Architecture, Structures and Construction
Verified
Journal Article
Open access
PDF file
Eda ÖzdemirEda Özdemir
Eda Özdemir
ARAndrea Rossi
Andrea Rossi
PEPhilipp Eversmann
Philipp Eversmann
Mycelium-based composites (MBCs) are a promising new class of environmentally friendly materials that can be produced using local materials and grown into a wide range of shapes and designs. Upscaling them to architectural scale, however, remains challenging particularly due to insufficient structural stability and the required manufacturing processes. The necessity of a formwork in the growing process often restricts designs to simple shapes, or requires costly formwork, which limits design flexibility. In preliminary research, the authors introduced 3D wood veneer lattices into MBCs as reinforcement, similar to steel reinforcement in concrete, to provide increased strength and scaffolding. This research combines robotic additive manufacturing of 3D wood lattices with a natural fibre textile, to act as a stay-in-place formwork for planar and curved architectural components. The combined lattice and textile serve as a support structure, eliminating the need for formwork and providing the required structural performance. As MBCs are often subject to large manufacturing tolerances, the fabrication steps that influence accuracy are analysed. Therefore, two prototypes of the same design are compared: one using a temporary formwork, and the other, a stay-in-place formwork. Results show that the temporary formwork provides precise shaping during growth, while the stay-in-place approach, incorporating natural fibre textiles, allows a more organic shape development. The methods are assessed via 3D scanning to compare the physical outcomes against the digital designs, highlighting trade-offs and limitations. This study contributes to sustainable biomaterials research by offering insights into the accuracy and feasibility of these approaches for future construction elements with MBCs.

27 May 2025 in Cambridge Open Engage
Verified
Preprint
Open access
PDF file
ARAndrea Rossi
Andrea Rossi
Eda ÖzdemirEda Özdemir
Eda Özdemir
AGAna Goidea
Ana Goidea
NNNadja Nolte
Nadja Nolte
PEPhilipp Eversmann
Philipp Eversmann
Topological interlocking assemblies (TIA) are structural systems composed of kinematically interlocking elements that rely solely on friction for stability, eliminating the need for additional connectors and enabling full reversibility. Precision in interlocking interfaces is crucial for effective load transfer. While existing research focuses on durable materials like concrete and 3D-printed polymers, less attention has been given to using biodegradable materials such as mycelium-based composites (MBCs). MBCs offer a sustainable alternative to conventional construction materials but present challenges for reversible assembly due to their non-homogeneous composition and dimensional shrinkage. To address this, we propose a method combining additive manufacturing (AM) with mycelium cultivation. A PLA bioplastic shell infused with wood particles serves as a lost formwork, which is then filled with a mycelium-inoculated substrate. The mycelium consumes the printed shell, naturally bonding the formwork and infill. The result is a lightweight, interlocking module capable of supporting compression loads while offering insulation and acoustic benefits. Given the shrinkage issues affecting interlocking precision, a study was conducted to assess dimensional variations and develop design adjustments. We demonstrate the design, production and cultivation process, as well as shrinkage control strategies. A full-scale prototype partition wall (2.40 x 1.00 m) with 112 interlocking blocks was fabricated using consumer 3D printers. Overall, the study presents a methodology for integrating MBCs in reversible architectural assemblies, enhancing reusability and extending material lifespan.