MAX phases are a promising family of materials for several demanding, high-temperature applications and severe conditions. Their combination of metallic and ceramic properties makes MAX phases great candidates to be applied in energy production processes, such as high temperature heat exchangers for catalytic devices. For their successful application, however, the effect of the processing method on properties such as wear and mechanical behavior needs to be further established. In this work, the mechanical and wear properties of self-synthesized Ti₃SiC₂ and Cr₂AlC MAX phase powders consolidated by different powder metallurgy routes are evaluated. Uniaxial pressing and sintering, cold isostatic pressing and sintering and hot pressing were explored as processing routes, and samples were characterized by analyzing microstructure, phase constitution and porosity. Wear behavior was studied by reciprocating-sliding tests, evaluating the wear rate by the loss of material and the wear mechanism.

Additive manufacturing (AM) has become one of the most promising manufacturing techniques in recent years due to the geometric design freedom that this technology offers. The main objective of this study is to explore Composite Extrusion Modelling (CEM) with aluminium as an alternative processing route for aluminium alloys. This process allows for working with pellets that are deposited directly, layer by layer. The aim of the technique is to obtain aluminium alloy samples for industrial applications with high precision, without defects, and which are processed in an environmentally friendly manner. For this purpose, an initial and preliminary study using powder injection moulding (PIM), necessary for the production of samples, has been carried out. The first challenge was the design of a sustainable aluminium-based feedstock. The powder injection moulding technique was used as a first approach to optimise the properties of the feedstock through a combination of water-soluble polymer, polyethyleneglycol (PEG), and cellulose acetate butyrate (CAB) wich produces low CO₂ emissions. To do this, a microstructural characterisation was carried out and the critical solid loading and rheological properties of the feedstocks were studied. Furthermore, the debinding conditions and sintering parameters were adjusted in order to obtain samples with the required density for the following processes and with high geometrical accuracy. In the same way, the printing parameters were optimised for proper material deposition.