Ehab H. E. Bayoumi

Prof. Ehab H. E. Bayoumi

Prof. at University of Eswatini, Department of Eletrical and Electronics engineering
orcid
Prof. at The British University in Egypt, Mechanical Enginee...

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 December 2016 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HHHany A. Hamed
Hany A. Hamed
Ahmed AbdouAhmed Abdou
Ahmed Abdou
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
EEE. E. El-Kholy
E. E. El-Kholy
This paper presents a new technique to adapt the cascaded delayed signal cancellation phase-locked loop (CDSC-PLL) using a proposed axis drift control (ADC). When grid frequency changes, the estimated grid angle by PLL drifts with a residual error proportional to the frequency change value thus, the accuracy and performance of the conventional CDSC-PLL is deteriorated which can lead to malfunction of the connected applications. Accordingly, CDSC-PLL type has to be adaptable to frequency changes with high immunity to grid disturbances. Designing frequency adapted CDSC-PLL is complex and needs a dedicated design due to the high nonlinearity introduced by adaptive loops. The ADC is proposed as an online adaptive technique that contains a self-tuned DSC operator to mitigate the grid disturbances and a PI controller to perform the adaptation task. The proposed technique is mathematically analyzed and systematic tuning methods are presented. A new analysis for CDSC under off-nominal sample parameter is presented and verified. The robustness of proposed adaptive controller is investigated under parameters uncertainty and various grid disturbances. The proposed technique is numerically and experimentally verified.

1 December 2022 in International Journal of Power Electronics and Drive Systems (IJPEDS)
Verified
Journal Article
Open access
PDF file
ABAhmed Abd El Baset
Ahmed Abd El Baset
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
WEWalid El-Khattam
Walid El-Khattam
AIAmr Mohamed Ibrahim
Amr Mohamed Ibrahim
The number of electrical vehicles (EVs) on the road has increased in recent years, including battery-electric vehicles (BEV), hybrid-electric vehicles (HEV), plug-in hybrid-electric vehicles (PHEVs), and fuel-cell electric vehicles (FCEV). This mode of transportation is expected to eventually replace internal combustion engine (ICE) vehicles, based on current trends. Each key EV component integrates several technologies that are either currently in use or have the potential to become prominent in the future. Environmental, power systems, and other industries may be adversely affected by electric vehicles (EVs). With sufficient EV penetration, the current power system could be subjected to severe instabilities; nevertheless, with proper management and coordination, EVs can significantly contribute to the success of the smart grid concept. Moreover, EVs have the potential to significantly cut transportation-related emissions of greenhouse gases. However, there are still considerable barriers that EVs must overcome before they can completely replace ICEs. The purpose of this study is to review all the relevant information available on EV architectures, battery energy sources, charging processes, and control approaches. Its goal is to provide a comprehensive overview of current EV technology.

1 April 2025 in Technologies
Verified
Journal Article
Open access
PDF file
Hilmy AwadHilmy Awad
Hilmy Awad
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
Smart inverters are pivotal in modern renewable energy systems, enabling efficient grid integration, stability, and advanced control of distributed energy resources. While existing literature addresses their technical functionalities, significant research gaps persist in areas such as interoperability, cybersecurity, standardization, and the integration of artificial intelligence for adaptive control. This article provides a comprehensive review of smart inverter technologies, emphasizing their role in renewable energy applications, advanced control strategies, and unresolved challenges. By systematically analyzing recent advancements and case studies, the paper identifies critical limitations in current practices, including economic barriers, regulatory misalignments, and fault tolerance under dynamic grid conditions. The review contributes to the field by synthesizing dispersed knowledge, highlighting under-researched areas, and proposing actionable pathways for future innovation. The main findings reveal the transformative potential of AI-driven grid-forming inverters for enhancing grid stability and resilience. However, their widespread adoption is hindered by the absence of harmonized standards and misaligned policy frameworks. Consequently, this review underscores the urgent need for policymakers to develop and implement supportive regulatory structures that facilitate the deployment of AI-enabled smart inverters and establish unified standards to ensure interoperability and cybersecurity. This work serves as a foundational reference for researchers and policymakers aiming to address technical and systemic bottlenecks in smart inverter deployment.

19 October 2017 in IEEE Transactions on Industrial Electronics
Verified
Journal Article
Closed access
HHHany A. Hamed
Hany A. Hamed
Ahmed AbdouAhmed Abdou
Ahmed Abdou
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
EEE. E. El-Kholy
E. E. El-Kholy
Repeated faults in an industrial grid have affected a steel manufacturing plant and resulted in frequent tripping of all medium voltage converters. The reason for the trips was a synchronization fault due to a severe short duration voltage dip. Converters need a relatively long time to resume its normal operation after dip recovery due to the capacitors precharging process. If the capacitor's discharging is prevented, the converter can resume its normal operation after being synchronized. The synchronization process is performed by a phase locked loop type SRF-PLL with a very low bandwidth and low-pass in-loop filter, which delays the recovery process. In this paper, a solution for the aforementioned trip is presented by proposing two different synchronization hybrid schemes. The first scheme is assuming the converter already lost the synchronization, and a ride-through sequence is implemented to prevent the capacitor from discharging. The second scheme is proposed to prevent the synchronization fault and to recover the converter quickly after dip ends. Both schemes are implemented using a single-input fuzzy logic controller to obtain a very fast response. The performance of the proposed schemes is validated through simulation and a prototype experimental setup.

28 January 2023 in Energies
Verified
Journal Article
Open access
PDF file
HSHisham M. Soliman
Hisham M. Soliman
Ashraf SaleemAshraf Saleem
Ashraf Saleem
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
Michele De SantisMichele De Santis
Michele De Santis
A photovoltaic generator connected to a large network and supplying a nonlinear load (source of harmonics) injects distorted current into the grid. This manuscript presents an invariant-ellipsoid set design of a robust controlled active power filter to inject current into the large grid with minimum total harmonic distortion (THD). The nonlinear load current is considered an external disturbance to minimize its effect on the injected grid current. Moreover, the large grid is modeled as a fixed voltage source in a series with a Thevenin impedance whose value changes within an interval. Using the invariant-ellipsoid technique, the problem is cast as a robust disturbance-rejection tracking control. The volume of the ellipsoid is minimized, which results in minimizing the effect of disturbance on system performance and keeping the trajectories as close as possible to the origin. The design is cast into a set of nonlinear matrix inequalities that are linearized by fixing a scalar. The resulting convex optimization is solved iteratively by linear matrix inequalities (LMIs). The simulation and experimental findings show that the proposed design is successful in reducing THD injected into the grid when grid impedance is uncertain and variable loads are applied (balanced and unbalanced cases).

26 July 2021 in Electronics
Verified
Journal Article
Open access
PDF file
Hilmy AwadHilmy Awad
Hilmy Awad
Ehab H. E. BayoumiEhab H. E. Bayoumi
Ehab H. E. Bayoumi
HSHisham M. Soliman
Hisham M. Soliman
Michele De SantisMichele De Santis
Michele De Santis
This paper introduces a new ellipsoidal-based tracker design to control a grid-connected hybrid direct current/alternating current (DC/AC) microgrid (MG). The proposed controller is robust against both parameters and load variations. The studied hybrid MG is modelled as a nonlinear dynamical system. A linearized model around an operating point is developed. The parameter changes are modelled as norm-bounded uncertainties. We apply the new extended version of the attractive (or invariant) ellipsoid for this tracking problem. Convex optimization is used to obtain the region’s minimal size where the tracking error between the state trajectories and the reference states converges. The sufficient conditions for stability are derived and solved based on linear matrix inequalities (LMIs). The proposed controller’s validity is shown via simulating the hybrid MG with various operational scenarios. In each scenario, the performance of the controller is compared with a recently proposed sliding mode controller. The comparison clearly illustrates the superiority of the developed controller in terms of transient and steady-state responses.