In the present study, the removal of valsartan (VLS), an antihypertensive agent, under simulated solar radiation with the use of molybdenum sulfide-bismuth oxychloride composites (MoS₂/BiOCl), of variable MoS₂ content (0.1–10.0 wt.%) was investigated. The physicochemical properties of the photocatalysts were examined by XRD, DRS, BET and TEM/HRTEM. Preliminary tests were conducted to examine the photocatalytic efficiency of the synthesized MoS₂/BiOCl composites towards VLS degradation in ultrapure water (UPW). It was found that the activity of pure BiOCl is improved with the addition of MoS₂. The degradation rate was maximized with the use of the catalyst containing 0.25 wt.% MoS₂. It was also found that the increase in catalyst concentration (50–1000 mg/L) enhances VLS degradation. It was found that VLS removal decreased by increasing VLS concentration. The effect of the water matrix on VLS removal was studied by carrying out experiments in real and synthetic water matrices. VLS degradation in UPW was faster than in bottled water (BW) and wastewater (WW), mainly due to the existence of organic matter in real aqueous media. Lastly, 0.25 wt.% MoS₂/BiOCl showed great stability after 360 min of irradiation, serving as a promising catalyst for water remediation of emerging contaminants under solar irradiation.

Biochar (BC), a carbonaceous material derived from biomass pyrolysis, exhibits a wide range of physicochemical properties, including a high cation exchange capacity, porosity, and specific surface area, which make it a highly valuable amendment for soil enhancement and environmental sustainability. As BC has shown strong potential to remediate soils, enhance their fertility, and increase crop productivity, it can successfully be used as a soil remediation factor. Additionally, it can play a critical role in carbon sequestration and climate change mitigation, revealing a high sorption capacity, multifunctionality, and long-term persistence in soils, where it can remain stable for hundreds to thousands of years. The present systematic review aims at presenting the dynamics of BC when incorporated into a soil system, focusing on its pH, water-holding capacity, aeration, microbiota, and carbon and nutrient availability across various case studies, particularly in acid, saline/sodic, and heavy metal-contaminated soils. Given the variability in BC performance, robust, long-term field-based research is essential to validate the current findings and support the development of targeted and sustainable biochar applications.

Sewage sludge (SS) management and wastewater (WW) treatment remain among the most critical environmental challenges. The pyrolysis of sewage sludge to produce biochar (BC) represents a sustainable and circular strategy for waste valorization and pollution mitigation. This scoping review provides a comprehensive overview of BC derived from SS (BCxSS), with particular emphasis on how pyrolysis conditions affect key physicochemical characteristics such as yield, ash content, pH, surface area, and functional groups. Although substantial research has focused on the removal of heavy metals and organic pollutants using BCxSS, far less attention has been directed toward its potential for pathogen adsorption and inactivation, revealing a notable research gap. Recent studies highlight BCxSS as a versatile material with considerable promise in adsorption and catalysis. However, its application in pathogen removal remains insufficiently investigated, underscoring the need for further investigation into sorption mechanisms and biochar–microbe interactions.

The occurrence of emerging micropollutants of pharmaceutically active compounds (PhACs) in the environment poses a public health concern. Due to PhAC persistence and toxicity even at low concentrations, advanced oxidation processes (AOPs) have gained interest as effective treatment methods. In this context, the present study focuses on the application of a dielectric barrier discharge (DBD)-based plasma jet to Diclofenac (DCF) and Sulfamethoxazole (SMX) degradation in aqueous media. Plasma is sustained by continuous-wave sinusoidal high-voltage of audio frequencies, and negligible total harmonic distortion, in a helium–air mixture. The target pharmaceuticals are chosen based on anticipation of their occurrence due to rehabilitation center (DCF) and hospital (SMX) effluents in sewage systems. The degradation rates are determined by Liquid Chromatography Triple-Quadrupole Mass Spectroscopy (LC-MS/MS). Removal efficiency close to 100%, after 20 min of plasma treatment in the case of DCF at an initial concentration of 50 ppb, is achieved. The post-treatment action of the plasma-induced reactants on PhAC degradation over a day-scale period is studied. The results provide an insight into the dynamic degradation (kinetics) of both DCF and SMX, and they overall highlight the potentiality of the process under consideration for sewage remediation.

Aquifers are increasingly threatened by the uncontrolled release of non-biodegradable chemicals derived from anthropogenic activities. The development of new remediation strategies has therefore focused on the use of sustainable adsorbent materials, including synthetic organic hydrogels and biochars produced from agricultural residues. In this study, the removal of two organic pollutants, the herbicide Metribuzin (MEB) and Propyl Paraben (PrP), from aqueous environments was investigated using negatively charged hydrogels and biochars derived from lime peel, respectively. Propyl Paraben (PrP) and Metribuzin (MEB) are among the pollutants frequently found in aquatic environments, and the effective and sustainable removal approaches remain under investigation. The hydrogels studied (P(DMAM co-ANax)) were based on sodium methacrylate (ANa) copolymerized with N,N-dimethylacrylamide (DMAM). The adsorption performance of the materials was evaluated through UV-Visible absorption spectrophotometry and High-Performance Liquid Chromatography (HPLC). The results of this study showed that the hydrogel achieved a very high removal efficiency for MEB, which was over 80% for the concentration range studied (max $Q_e$ = 0.386 mg/g). Similar behavior was also recorded for the biochar from lime peel, which achieved almost complete removal of PrP (~100%) at the lowest concentrations of the contaminant (5 mg/L) and maintained high removal rates (78%) at 10 mg/L (max $Q_e$ = 0.187 mg/g). These results demonstrate the potential of both types of materials to efficiently remove the studied contaminants from water, indicating their suitability for environmental remediation applications. This work contributes to the development of cost-effective and eco-friendly adsorbents for the treatment of water pollution caused by emerging organic compounds.

Viticulture, winemaking, and distillation industries produce substantial quantities of organic by-products (grape prunings, stems, marc-pomace, spent yeast, wine lees, distillation heads and tails, stillage), presenting both environmental challenges and promising opportunities for sustainable valorization. This narrative review offers a comprehensive analysis of the viticulture, winemaking, and distillation processes, along with the characterization of their solid and liquid by-products. Furthermore, it examines the chemical composition and mentions main valorization strategies for these residues, emphasizing their potential both as feedstocks for biochar production and as sources of valuable solvents. Additionally, various applications of biochars are explored, with particular focus on biochar derived from grape pruning and grape pomace-marc biomass, highlighting its effectiveness as a sorbent for environmental contaminants. Moreover, a broad range of biochar activation and modification methods that enhance physicochemical properties and expand functional applications is reviewed. Solvent-based biochar modification is also examined in order to introduce a novel concept: employing grape distillation liquid by-products (heads and tails fractions) to activate biochars made from grape prunings and pomace, creating a high-value sorbent while simultaneously valorizing two major waste streams. This dual-use strategy offers a new pathway for circular resource management within the viticulture and winemaking sectors.