The aim of this manuscript is to introduce solutions to optimize economic dispatch of loads and combined emissions (CEED) in thermal generators. We use metaheuristics, such as particle swarm optimization (PSO), ant lion optimization (ALO), dragonfly algorithm (DA), and differential evolution (DE), which are normally used for comparative simulations, and evaluation of CEED optimization, generated in MATLAB. For this study, we used a hybrid model composed of six (06) thermal units and thirteen (13) photovoltaic solar plants (PSP), considering emissions of contaminants into the air and the reduction in the total cost of combustibles. The implementation of a new method that identifies and turns off the least efficient thermal generators allows metaheuristic techniques to determine the value of the optimal power of the other generators, thereby reducing the level of pollutants in the atmosphere. The results are presented in comparative charts of the methods, where the power, emissions, and costs of the thermal plants are analyzed. Finally, the comparative results of the methods were analyzed to characterize the efficiency of the proposed algorithm.
1 July 2021 in International Journal for Innovation Education and Research
The classic Economic Dispatch (ED) problem considers only the cost of power generation by thermal generators, often disregarding the safety parameters of the electrical network, environmental costs and especially the importance of predictive maintenance of the generators, when considering environmental costs in the optimization of ED this becomes a multi-objective problem Environmental Economic Dispatch (EED). Considering the global pressure to reduce emissions of pollutants in the atmosphere and environmental sustainability, incorporating the generation of Renewable Energies (RE) or Green Energy in the electricity grid is indispensable. Solar energy is becoming an important part of the power generation portfolio in many regions due to the fast decline in its costs and political incentives that favor the generation of clean energy sources. This article uses the Ant Lion Optimizer (ALO) method to solve the problem and EED restricted to the grid in a hybrid system (thermoelectric and photovoltaic). The results of the optimization problem were simulated in MATLAB. This research included 01 thermoelectric with 06 generators and 13 solar plants.
3 February 2025 in Revista de Gestão e Secretariado
A Indústria 4.0 trouxe a necessidade de integrar tecnologias avançadas para melhorar a eficiência e agilidade dos processos administrativos. Este estudo propõe a aplicação da lógica fuzzy na otimização da emissão de notas fiscais, um processo crítico que enfrenta desafios como erros manuais, atrasos e custos elevados. Foi desenvolvido um modelo fuzzy que identifica variáveis-chave, aplica regras de inferência e testa a solução em um ambiente real com dados operacionais. A metodologia incluiu a análise detalhada do fluxo de emissão, categorização de variáveis e uso de ferramentas de software para implementação prática. Os resultados indicam uma redução significativa de erros e tempos de processamento, além de ganhos em conformidade fiscal e satisfação do cliente. Este trabalho reforça a aplicabilidade da lógica fuzzy em processos administrativos, ao integrar conceitos de Lean Office e tecnologias da Indústria 4.0, contribuindo para a inovação e competitividade empresarial.
3 February 2025 in Revista de Gestão e Secretariado
A gestão eficiente da energia elétrica em ambientes industriais é um desafio crucial, exacerbado pelo aumento contínuo do consumo e pelas frequentes ineficiências no uso dos recursos disponíveis. A crise energética de 2001 no Brasil destacou a necessidade de soluções inovadoras para promover o uso racional da energia. Neste contexto, a Indústria 4.0 e as Smart Grids emergem como abordagens promissoras, integrando tecnologias digitais avançadas para otimizar a produção, distribuição e consumo de energia. A plataforma SGE (Sistema de Gestão Energética) já oferece um monitoramento abrangente, mas a necessidade de dispositivos portáteis para análises pontuais e inspeções itinerantes permanece. O objetivo desta dissertação é desenvolver e validar um dispositivo portátil de monitoramento de energia, integrado à plataforma SGE, com a aplicação da lógica fuzzy para suporte à tomada de decisão em tempo real. A lógica fuzzy foi incorporada ao sistema para avaliar, de forma dinâmica e adaptativa, dados como demanda, consumo e fator de potência, possibilitando a priorização de ações corretivas em sub-circuitos industriais. Os materiais e métodos empregados incluíram o desenvolvimento de um novo hardware portátil de monitoramento, a criação de um aplicativo mobile para interface de usuário e a integração destes componentes com a plataforma SGE. A validação do dispositivo foi realizada através de campanhas de inspeção itinerante em ambientes industriais reais, permitindo a coleta, análise e interpretação avançada dos dados de consumo energético com o auxílio da lógica fuzzy. Os resultados demonstraram que o dispositivo portátil, quando integrado à plataforma SGE e equipado com a lógica fuzzy, permitiu análises detalhadas e tomadas de decisão precisas em tempo real, identificando perdas e pontos de ineficiência com maior assertividade. A solução proposta mostrou-se promissora ao agregar valor tecnológico, melhorar a eficiência energética e promover a sustentabilidade, com potencial significativo para reduzir custos e perdas de energia elétrica em indústrias.
30 November 2019 in International Journal for Innovation Education and Research
The present study has as main objective to verify the reduction of electric energy consumption, allied to the possible economic-financial and environmental benefits that are associated with the use of LED lamps in a commercial building, where it develops office activities covering only part of the building. , which served as the experimental basis for the application of the case study, initiated after a survey of the electrical and constructive characteristics of the luminaires installed on site. In research conducted in the local market specialized in the subject, we selected lamps that are more easily found, analogous to those already installed, manufactured by traditional companies in the field. The monitoring of lighting loads was made by measuring by specific equipment and simulation of energy billing according to the rules of calculations established in rules governed by government agencies and tariff framework in which the building is in both scenarios, before and after lamp replacement. Providing financial technical evaluation through the use of indicators that show the viability of this substitution.
1 January 2022 in ITEGAM- Journal of Engineering and Technology for Industrial Applications (ITEGAM-JETIA)
Traffic inspection is present in the daily lives of drivers. However, this inspectional process often presents itself in an inefficient and archaic way, by using paper and pen to write down the infractions committed, especially in regions lacking the latest technology. Thus, the objective of this work is to present a possible solution to this problem, with the development of a prototype application that allows the user to perform these inspections in a digital way. The methodology used includes a visit to Centro de Cooperação da Cidade (CCC) in Manaus, Amazonas, to analyze the current scenario of the city's traffic inspection system, as well as the determination of methods to integrate the information between the application developed and PRODAM's database. At the end of the research and development, the significant potential to aid traffic agents is verified, and presents direction for future research in the area to improve what was developed in this work.