Elvia Soraya Santos Nascimento

Ms. Elvia Soraya Santos Nascimento

Engenharia de Materiais, Universidade Federal de Sergipe, Aracaju, Sergipe, Brazil
orcid

Research Focus & Metrics

Academic Career Length

2Years (2025-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
1 July 2025 in Ceramics
Verified
Journal Article
Open access
PDF file
Elvia Soraya Santos NascimentoElvia Soraya Santos Nascimento
Elvia Soraya Santos Nascimento
HOHerbet Alves Oliveira
Herbet Alves Oliveira
CSCochiran Pereira dos Santos
Cochiran Pereira dos Santos
MGMaria de Andrade Gomes
Maria de Andrade Gomes
MVMário Ernesto Giroldo Valerio
Mário Ernesto Giroldo Valerio
ZMZelia Soares Macedo
Zelia Soares Macedo
This study investigates the use of gypsum waste from civil construction as a partial substitute for cement in soil–cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement–soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of chemical composition, crystalline phases, plasticity, and thermal behavior. Specimens, molded by uniaxial pressing into cylindrical bodies and cured for either 7 or 28 days, were evaluated for compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% in all samples, with an average value of 16.20%. Compressive strength after 7 days exhibited a slight reduction with increasing gypsum content, ranging from 16.36 MPa (standard formulation) to 13.74 MPa (40% gypsum), all meeting the quality standards. After 28 days of curing, the formulation containing 10% gypsum achieved the highest compressive strength (26.7 MPa), surpassing the reference sample (25.2 MPa). Mass loss during wetting–drying cycles remained within acceptable limits for formulations incorporating up to 20% gypsum. Notably, samples with 5% and 10% gypsum demonstrated superior mechanical performance, while the 20% formulation showed performance comparable to the standard formulation. These findings indicate that replacing up to 20% of cement with gypsum waste is a technically and environmentally viable approach, supporting sustainable development, circular economy, and reduction of construction-related environmental impacts.

2 April 2025 in Preprints.org
Verified
Preprint
Open access
PDF file
Elvia Soraya Santos NascimentoElvia Soraya Santos Nascimento
Elvia Soraya Santos Nascimento
HOHerbet Alves Oliveira
Herbet Alves Oliveira
CSCochiran Pereira dos Santos
Cochiran Pereira dos Santos
MGMaria de Andrade Gomes
Maria de Andrade Gomes
MVMário Ernesto Giroldo Valerio
Mário Ernesto Giroldo Valerio
ZMZelia Soares Macedo
Zelia Soares Macedo
This study explores the use of gypsum waste from civil construction as a partial replacement for cement in soil-cement formulations, aiming to produce eco-friendly bricks aligned with circular economy principles. Formulations were prepared using a 1:8 cement-to-soil ratio, with gypsum replacing cement in proportions ranging from 5% to 40%. The raw materials were characterized in terms of their chemical composition, crystalline phases, plasticity, and thermal profile. The formulations, molded by uniaxial pressing into cilindrical bodies and cured for 7 or 28 days, were tested for crystalline phases, compressive strength, water absorption, durability, and microstructure. Water absorption remained below 20% for all samples, with an average value of 16.20%. Compressive strength after 7 days decreased slightly with increasing gypsum content, from 16.36 MPa (0% gypsum) to 13.74 MPa (40% gypsum), still meeting the quality standard. After 28 days of curing, the formulation containing 10% gypsum achieved the highest strength (26.7 MPa), surpassing the reference sample without gypsum (25.2 MPa). Mass loss due to water immersion remained within acceptable limits for formulations containing up to 20% gypsum. Notably, samples with 5% and 10% gypsum exhibited superior mechanical performance, while samples with 20% gypsum showed comparable results to the reference. These findings suggest that replacing up to 20% of cement with gypsum waste is a viable and sustainable alternative, promoting circular economy practices and reducing the environmental impact of construction waste.