Purpose: The aviation industry has started environment friendly and also conventional energy independent alternative energy dependent designs to reduce negative impacts on the nature and to maintain its future activities in a clear, renewable and sustainable way. One possible solution proposed is solar energy. Solar-powered aerial vehicles are seen as key solutions to reduce global warming effects. This study aims to simulate a mathematical model of a solar powered DC motor of an UAV on MATLAB/Simulink environment. Design/methodology/approach: Maximum power point tracking (MPPT) is a critical term in photovoltaic (PV) array systems to provide the maximum power output to the related systems under certain conditions. In this paper, one of the popular MPPT techniques, “Incremental Conductance”, is simulated with solar-powered DC motor for an UAV design on MATLAB/Simulink. Findings: The cascade structure (PV cell, MPPT, buck converter and DC motor models) is simulated and tested under various irradiance values, and results are compared to the DC motor technical data. As a result of that, mathematical model simulation results are overlapped with motor technical reference values in spite of irradiance changes. Practical implications: It is suggested to be used in real time applications for future developments. Originality/value: Different from other solar-powered DC motor literature works, a solar-powered DC motor mathematical model of an UAV is designed and simulated on MATLAB/Simulink environment. To adjust the maximum power output at the solar cell, incremental conductance MPPT technique is preferred and a buck converter structure is connected between MPPT and DC motor mathematical model. It is suggested to be used in solar-powered UAV designs for future developments.
Three-phase grid-connected photovoltaic inverters are commonly used to feed power back to the utility. This paper aims to investigate a different DC-DC converter approach for photovoltaic applications which are connected to mains. The output of the PV array is connected to the Super-Lift Luo Converter (SLLC) to boost the system voltage significantly and a three-phase H-bridge inverter is used to produce sinusoidal output for grid connection. The principal aim of this paper is to provide an alternative PV inverter topology solution for medium scale (<;50 kW) applications as well as distributed grid-connected inverters. This paper will provide the operation principles of the proposed circuit and a range of computer simulation results.
This paper analyses a new half-bridge current–source inverter for avionic systems. In the circuit, two 28 V batteries are used as inputs. These voltage sources are connected to inductors which create a constant current source. Then only two high-frequency switches are used to waveshape the positive and negative half-cycles. The SCR-based half-bridge allows positive and negative current flow properly. The inverter output uses a CL filter to remove PWM components and to obtain 400 Hz sinewave output. Simulation and HIL experiment results are provided with feedback control to prove the concept of the proposed topology. The study shows that the new current–source topology provides promising results while complying with aviation standards.
This paper proposed a current-source inverter for avionic systems. The topology has a DC link inductor in series with the battery to create a constant current-source. A single high-frequency switch is used to supply a sinusoidal pulse width modulated output current. A SCR-based H-bridge inverter "unfolds" the output of the switch to produce a 400 Hz AC output current after a capacitive-inductive low-pass filter. The proposed inverter concept is validated with simulations and Typhoon HIL® real-time experimental testing.
2 July 2020 in International Journal of Turbo & Jet-Engines
Reducing the carbon footprints of aerial transportation became a major target for both industries and academia. Various solutions have been proposed to develop cleaner alternative methods for green transportation. Full electric, hybrid electric, and turboelectric propulsion system architectures intend to reduce greenhouse gas emissions and fuel consumption of today’s aero gas turbine engines. In this study, a turboelectric propulsion system, which is considered as the most promising technology for future aviation is selected for modelling and simulation. As the main power supply, a high fidelity mathematical model of GE T700 turboshaft engine is constructed in MATLAB/Simulink to emulate the technology of today. Selected aero gas turbine’s mathematical model is combined with NASA’s Baseline electrical power distribution architecture which is firstly designed for N-3X turboelectric aircraft. MATLAB/Simulink model is utilized to analyses a single-engine operational scenario of twin-engine aircraft which is a major design consideration due to single-engine failure. Power requirements, distribution percentages, preliminary power assessment for power electronic systems and nominal power capacities of each electrical unit of a turboelectric propulsion system are obtained using GE T700 as the main power supply.
The principal aim of this work is to design a battery-operated 1.2kW interleaved synchronous buck converter for aviation systems to obtain lower losses compared to the existing topologies. It is desired to achieve at least a 5% loss reduction. Military aircrafts such as F-22 and civil aircraft as Boeing 787 are using the 270V DC for their battery systems. Although 270V DC system has some advantages such as reducing loses and the passive element sizes, old avionics that have been designed, produced and used since the second world war may not be compatible with the 270V DC system. Conversion from 270V to 28V appears to be quite promising for both old and new systems. Therefore, a buck converter design for 270 to 28V conversion is proposed in this study to adapt older avionics technology to accommodate new achievements. The analysis of the SiC MOSFET based interleaved synchronous buck converter with a double loop PI controller is presented. The paper demonstrates the principles of the design and discusses possible future developments. The concept is verified using simulations.