Erika Alessia Di Liberto

Ms. Erika Alessia Di Liberto

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ELErika Alessia Di Liberto
Erika Alessia Di Liberto
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
The transition to a more sustainable lifestyle requires a move away from petroleum-based sources and the investigation and funding of renewable and waste feedstocks to provide biobased sustainable materials. The formulation of films based on chitosan and microcrystalline cellulose with potential applications in the packaging sector has been demonstrated. Glycerol is also used as a plasticizer in the formulation of flexible films, while mucic acid is used as a valid alternative to acetic acid in such films. The film based on chitosan, microcrystalline cellulose, glycerol, and mucic acid shows properties and a performance similar to those of the film formulated with acetic acid, and, in addition, it seems that the photo-oxidation resistance of the film based on mucic acid is better than that of the material containing acetic acid. The films were characterized using spectroscopy (FTIR and UV-vis), tensile testing, water contact angle measurements, surface observations, and photo-oxidation resistance measurements. The presence of microcrystalline cellulose enhances the mechanical behavior, UV barrier properties, and surface hydrophobicity of the film. The feasibility of formulating chitosan-based films, with or without microcrystalline cellulose, which exhibit good properties and performances is demonstrated. Mucic acid instead of acetic acid is used in the formulation of these film.

15 May 2024 in Polymers
Verified
Journal Article
Open access
PDF file
ELErika Alessia Di Liberto
Erika Alessia Di Liberto
Giuseppe BattagliaGiuseppe Battaglia
Giuseppe Battaglia
RPRosalia Pellerito
Rosalia Pellerito
GCGiusy Curcuruto
Giusy Curcuruto
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Polystyrene (PS) is an extremely stable polymer with a relatively high molecular weight and a strong hydrophobic character that makes it highly resistant to biodegradation. In this study, PS was subjected to biodegradation tests by Tenebrio Molitor (T. Molitor) and Zophobas Morio (Z. Morio) larvae. Specifically, six different experimental diets were compared: (i) T. Molitor fed with bran; (ii) T. Molitor fed only PS; (iii) T. Molitor fed only PS treated with H2O2; (iv) Z. Morio fed with bran; (v) Z. Morio fed only PS; and (vi) Z. Morio fed only PS treated with H2O2. Therefore, the mass change of the larvae and the survival rate were measured periodically, while the frass collected after 15 and 30 days was analyzed by different analyses, such as spectroscopy (FTIR), spectrometry (molecular weight and polydispersity), thermal analysis (TGA) and microscopy (scanning electron microscopy observations). The obtained results suggest that in the case of T. Molitor larvae, larvae feeding on bran showed the highest survival rate of ~94% at 30 days, while in the case of the Z. Morio larvae, the highest survival rate was exhibited by larvae eating PS-H2O2. Although not strongly pronounced, the Mw and Mn of PS in the frass of both T. Molitor and Z. Morio larvae decreased over 30 days, suggesting PS biodegradation. Finally, the morphological analysis shows that PS samples isolated from the frass of T. Molitor and Z. Morio larvae showed completely different, rough and irregularly carved surface structures, in comparison to PS before biodegradation.

24 September 2025 in Polymers
Verified
Journal Article
Open access
PDF file
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Giulia InfurnaGiulia Infurna
Giulia Infurna
CRISTINA SCOLAROCRISTINA SCOLARO
CRISTINA SCOLARO
ELErika Alessia Di Liberto
Erika Alessia Di Liberto
MLMariem Ltayef
Mariem Ltayef
Annamaria ViscoAnnamaria Visco
Annamaria Visco
The current work is driven by applying circular principles, and it investigated the potential recyclability of polybutylene succinate (PBS) containing brewer’s spent grain filler (BSGF, 30 wt%) in comparison to the recyclability of pure PBS. PBS is much more stable than the PBS/BSGF composite during processing cycles. Typically, thermomechanical degradation induces radical formation and branching of the macromolecular chain in PBS. Furthermore, PBS becomes less hydrophilic (by 53%, reaching 84°, approaching the 90° threshold), and its surface roughness increases by about 38% after five processing cycles. BSGF increases the viscosity of the melt, especially at low frequencies, and stabilizes the melt in the PBS/BSGF, which has lower torque variations during processing compared to pure PBS. Furthermore, BSGF in r-PBS/BSGF increases both hydrophilicity (by about 15%, from 75° to 64°) and surface roughness (by about 17%) after five processing cycles of the solid bio-composite and limits the formation of carboxylic groups during thermomechanical degradation. PBS is recyclable five times because it maintains its properties unchanged during extrusion cycles. At least two reprocessing steps are required for PBS/BSGF to obtain an optimal dispersion of BSGF, which can be re-extruded approximately three times. PBS/BSGF after four and five extrusion steps shows increased rigidity (Et PBS/BSGF > Et PBS) and reduced ductility (εb PBS/BSGF < εbt PBS), which could limit the recyclability of the PBS-based composite.

4 April 2024 in Preprints.org
Verified
Preprint
Open access
PDF file
ELErika Alessia Di Liberto
Erika Alessia Di Liberto
Giuseppe BattagliaGiuseppe Battaglia
Giuseppe Battaglia
RPRosalia Pellerito
Rosalia Pellerito
GCGiusy Curcuruto
Giusy Curcuruto
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Polystyrene (PS) is an extremely stable polymer with relatively high molecular weight and a strong hydrophobic character that makes it highly resistant to biodegradation. In this study, PS was subjected to biodegradation tests by Tenebrio Molitor (T. Molitor) and Zophobas Morio (Z. Morio) larvae. Specifically, six different experimental diets were compared: (i) T. Molitor fed with bran; (ii) T. Molitor fed only PS; (iii) T. Molitor fed only PS treated with H2O2; (iv) Z. Morio fed with bran; (v) Z. Morio fed only PS and (vi) Z. Morio fed only PS treated with H2O2. Therefore, the mass change of the larvae and the survival rate were measured periodically, while the frass collected after 15 and 30 days were analyzed by different analyses, such as spectroscopy (FTIR), spectrometry (molecular weight and polydispersity), and microscopy (scanning electron microscopy observations). The obtained results suggest that in the case of T. Molitor larvae, larvae feeding on bran showed the highest survival rate of ~94 % at 30 days, while in the case of the Z. Morio larvae, the highest survival rate was exhibited by larvae eating PS-H2O2. Although not strongly pronounced, the Mw and Mn of PS frass of both T. Molitor and Z. Morio larvae decreased over 30 days, suggesting the Ps biodegradation. Finally, the morphological analysis shows that PS samples isolated from the frass of T. Molitor and Z. Morio larvae showed completely different, rough and irregularly carved surface structures, in comparison to PS before biodegradation.

20 October 2026 in Molecules
Verified
Journal Article
Open access
PDF file
ELErika Alessia Di Liberto
Erika Alessia Di Liberto
Maurizio VolpeMaurizio Volpe
Maurizio Volpe
Antonio MessineoAntonio Messineo
Antonio Messineo
Nadka Tzankova DintchevaNadka Tzankova Dintcheva
Nadka Tzankova Dintcheva
Pine sawdust waste was converted by hydrothermal carbonisation into carbon-rich particles (HTC-WS) and incorporated into chitosan to produce a sustainable biocomposite film (Chit_HTC-WS). Chitosan–microcrystalline cellulose film (Chit_MCC) and neat chitosan (Chit) were also prepared for comparison. The films were characterised by structural, mechanical, thermal, surface, UV resistance, and degradation properties in freshwater, simulated seawater, and soil burial conditions. The results obtained highlight that HTC-WS provides UV blocking and reduces transparency in the visible range, similarly to MCC. Despite their different chemical natures and elemental compositions, both HTC-WS and MCC can reduce chitosan rigidity, increasing the ductility of the film, albeit less pronouncedly, compared to the neat chitosan film. Both HTC-WS and MCC can slightly improve the photo-oxidation resistance of chitosan-based films due to their ability to absorb harmful UVB rays. Neat Chit shows rapid degradation in soil burial (up to disappearance within ca. 15 days), whereas Chit_MCC and, even more so, Chit_HTC-WS, show significantly less degradation; specifically, Chit_HTC-WS does not disappear even after 96 days, exhibiting weight loss of ca. 30%, whereas Chit_MCC disappears after 96 days. Interestingly, chitosan shows different hydrolytic degradation in freshwater and simulated seawater, and as expected, the presence of salts slows down its hydrolysis. The presence of MCC and HTC-WS reduces the hydrolytic degradation of chitosan-based films, resulting in a final weight loss of approximately 30% in both environments.