Yuehui Gao

Mr. Yuehui Gao

Inner Mongolia University, Hohhot, Inner Mongolia, China
orcid

Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
27 February 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
MWMin Wei
Min Wei
JWJunlin Wang
Junlin Wang
XWXin Wang
Xin Wang
TLTao Liu
Tao Liu
YLYuhang Lu
Yuhang Lu
Yuehui GaoYuehui Gao
Yuehui Gao
A single-layer low-profile dual-band patch antenna is proposed in this paper. A Π-shaped slot is engraved on the radiating patch, separating it into a main patch and a parasitic patch to achieve the dual-band characteristics. The purpose of loading five shorting pins between the two vertical slots on the main patch is to turn down the two frequencies, which can generate TM01 mode and TM11 mode. To improve the impedance matching in the lower band and broaden the dual-band bandwidth, four shorting pins are placed on the edge of the long side of the parasitic patch, which can excite the TM10 mode. The combination of the TM01, TM11 and TM10 modes achieves the 3.45∼3.7 GHz and 4.7∼5.33 GHz dual-band. Manufacturing and measuring a prototype. The results of the measurements indicate that the antenna achieves a dual-band with reflection coefficient less than -6dB which are 3.5∼3.75 GHz (250 MHz, 7.0%) and 4.73∼5.41 GHz (680 MHz, 13.4%) with peak gains of 6.23 dB and 5.06 dB in the low and high bands, respectively. The average total efficiencies in the dual bands are 64.2% and 77.3%, respectively.

29 March 2023 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Yuehui GaoYuehui Gao
Yuehui Gao
JWJunlin Wang
Junlin Wang
XWXin Wang
Xin Wang
ZSZhanshuo Sun
Zhanshuo Sun
This letter presents an extremely low-profile dual-band antenna based on a single-layer square microstrip patch for 5G mobile application. The antenna has a height of only 0.8 mm (about 0.009λ L at 3.45 GHz) and a footprint of 30×30 mm 2 (0.345×0.345λ L 2 ). The TM 10 mode at around 3.56 GHz and the TM 11 mode at around 4.91 GHz for the antenna are obtained by etching a pair of symmetrical circular notches and a narrow rectangular slot on the square patch. The TM 1/2,0 mode at around 3.45 GHz and the TM 1/2,1 mode at around 4.83 GHz of the antenna are generated by further placing two 2-order matrix-style shorting pins. The combination of the four modes can overcome the effect of insufficient bandwidth due to the very low profile, resulting in 3.4–3.6 GHz (partial 5G N78 band) and 4.79–4.94 GHz (partial 5G N79 band) dual-band operation. The measured results are also presented.

20 December 2022 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
Yuehui GaoYuehui Gao
Yuehui Gao
JWJunlin Wang
Junlin Wang
XWXin Wang
Xin Wang
MWMin Wei
Min Wei
A low profile broadband multimode patch antenna is proposed for 5G mobile applications. The proposed antenna is made up of a single metal patch, a FR-4 dielectric substrate layer, an air cavity, and eight metal pins. The patch can form a magnetic wall by adding the eight metal pins, which can also generate a pair of TM 1/2,0 modes and TM 10 mode. Based on these modes, two narrow rectangles with 0.169λ (about 0.011λ at 3.9 GHz) are etched on the patch, which can simultaneously form two kinds of new modes (TM 1/2,1 and TM 1/2,2 ) to achieve the broadband operation (3.3∼4.2 GHz). To ensure the accuracy of this principle, the antenna sample is made and measured. The measured outcomes are in good accordance with the simulated ones, and the sample can still operate at 3.3∼4.2 GHz, covering the 5G N77 band. The in-band total efficiency can reach up to -0.491 dB (89.3%). The maximum gain in the entire band is 9.4 dB.
1

1 July 2022 in Micromachines
Verified
Journal Article
Open access
PDF file
Yuehui GaoYuehui Gao
Yuehui Gao
JWJunlin Wang
Junlin Wang
XWXin Wang
Xin Wang
RSRui Shao
Rui Shao
In this paper, a highly isolated multiple-input multiple-output (MIMO) antenna array is proposed for fifth-generation (5G) metal frame smartphones. The eight identical small-sized inverted F-shaped folded slots are etched on the metal frame as a MIMO antenna. The bandwidth of the antenna can be adjusted by changing one of the short branches of the antenna. The bandwidth of the antenna can reach the N79 band (4.4~5.0 GHz). By carefully arranging the positions of the eight antenna elements, ideal spatial diversity can be successfully achieved to mitigate the coupling between the antenna elements effectively. What is more, a small combination slot of C-shape (0.0078 × 0.047λ2) and vertical I-shape (0.12 × 0.004λ2) between each antenna element is introduced to improve the element isolation of the MIMO antenna system. The proposed MIMO array has been simulated, fabricated, and measured. The results show good impedance matching (return loss > 6 dB) and high isolation (>22 dB). Due to the decent element isolation, the envelope correlation coefficient (ECC) between each antenna element is below 0.049. It can provide a reliable anti-interference performance for the MIMO antenna system. In addition, the measured radiation efficiencies of the MIMO antenna system are higher than 50%. The interaction of the hand model with the MIMO antenna system is also investigated, including the specific absorption rate (SAR).
1

15 April 2024 in IEEE Antennas and Wireless Propagation Letters
Verified
Journal Article
Closed access
YLYuhang Lu
Yuhang Lu
JWJunlin Wang
Junlin Wang
XWXin Wang
Xin Wang
TLTianyu Liu
Tianyu Liu
Yuehui GaoYuehui Gao
Yuehui Gao
TLTao Liu
Tao Liu
In this letter, a extremely low profile dual-band patch antenna is proposed for 5G terminal applications. Target bands are part of the 5G N78 band (3.4-3.6 GHz) and part of the 5G N79 band (4.8-5.0 GHz). Use the two resonant modes of the half-mode patch and adjust their size to separate the resonant frequencies. Loads parasitic patches to extend their efficiency and impedance bandwidths. In order to make the antenna occupy less space, two pairs of perpendicular slots are etched in the middle of the antenna to extend the current path and reduce the resonance frequencies. The average efficiency of the designed antenna is higher than most of the reported patch antennas. Physical fabrication and device testing were performed to prove the feasibility of the proposed antenna.

4 March 2026 in IEEE Transactions on Antennas and Propagation
Verified
Journal Article
Closed access
Yuehui GaoYuehui Gao
Yuehui Gao
XYXue-Song Yang
Xue-Song Yang
WSWen-Hui Shi
Wen-Hui Shi
BWBing-Zhong Wang
Bing-Zhong Wang
A novel coupling suppression method, namely Differential-Common Mode Path Synergy (D-CMPS) technique, is proposed for shared-aperture dual-band base station antennas. The D-CMPS method employs two key strategies: Elimination of Reverse-Flow Current Radiation and Mitigation of In-Phase Current Radiation. The strategies guide high-band (HB) induced currents into precisely engineered differential mode (DM) and common mode (CM) paths that are deliberately integrated within the low-band (LB) antenna structure. This approach provides an innovative perspective for effectively mitigating cross-band coupling. Specifically, the HB-induced currents generated by illumination from the HB antenna are strategically redirected and confined within the DM and CM paths. Through the synergistic interaction of the DM and CM pathways, coupling from the LB antenna onto the HB antenna is significantly reduced, ensuring that the HB antenna’s radiation patterns remain undistorted. Meanwhile, the additional DM and CM paths have negligible impact on the LB antenna’s inherent performance. To experimentally validate this concept, a shared-aperture dual-band antenna array incorporating the Differential-Common Mode Path (D-CMP) structure was designed, fabricated, and measured. The results demonstrate that, compared to existing the coupling-suppression techniques, D-CMPS approach not only achieves robust suppression of cross-band coupling but also streamlines the design and fabrication process, thereby reducing manufacturing costs.