The imitative modelling of processes in the brain of living beings is an ambitious task. However, advances in the complexity of existing hardware brain models are limited by their low speed and high energy consumption. A superconducting circuit with Josephson junctions closely mimics the neuronal membrane with channels involved in the operation of the sodium-potassium pump. The dynamic processes in such a system are characterised by a duration of picoseconds and an energy level of attojoules. In this work, two superconducting models of a biological neuron are studied. New modes of their operation are identified, including the so-called bursting mode, which plays an important role in biological neural networks. The possibility of switching between different modes in situ is shown, providing the possibility of dynamic control of the system. A synaptic connection that mimics the short-term potentiation of a biological synapse is developed and demonstrated. Finally, the simplest two-neuron chain comprising the proposed bio-inspired components is simulated, and the prospects of superconducting hardware biosimilars are briefly discussed.
Superconducting Josephson structures play a significant role in quantum‐state engineering. Achieving high‐fidelity quantum state measurements in superconducting Josephson structures requires ultra‐low noise environments and robust signal purification techniques. Here, the advanced low‐noise signal measurement system designed for dilution refrigerators is presented, integrating multi‐stage cryogenic filtering and electromagnetic shielding strategies to suppress noise sources across a broad frequency spectrum. The effectiveness of low‐pass RC filters is demonstrated, silver‐epoxy microwave absorbers, and optimized ground isolation to achieve an unprecedented noise reduction, enabling sub‐nanoampere switching current distribution measurements superior to commerical systems at mK temperatures. The system is optimized for precision studies of superconductor‐insulator‐superconductor, superconductor‐ferromagnet‐superconductor, and superconductor‐normal metal‐superconductor Josephson junctions with low critical currents. This approach establishes a reliable framework for next‐generation quantum electronic experiments, ensuring that observed switching phenomena are governed by intrinsic device physics rather than environmental perturbations.
We present a tunable Josephson generator that enables direct qubit excitation and two‐tone spectroscopy while reducing cryogenic wiring complexity and thermal load. The device consists of a current‐biased Josephson junction integrated with a superconducting spiral resonator, forming a microwave source that operates at cryogenic temperatures. Unlike conventional qubit drive setups that require coaxial microwave lines from room temperature to the base stage, our system requires only a single direct current (DC) bias line from room temperature. The generated microwave signal is delivered to the qubit via a short coaxial line between the 4 K and 20 mK stages, significantly reducing wiring complexity, thermal load in the cryostat and leveraging unused volume at the 4 K stage. We demonstrate continuous‐wave excitation of a superconducting qubit and perform tunable two‐tone spectroscopy using the Josephson generator as the drive source, resolving qubit spectra with performance comparable to a standard microwave source. Our generator is characterized by low phase noise and can be phase‐locked to an external reference for enhanced stability. Operating at 4 K temperature, this self‐contained source offers a low‐noise, space‐efficient solution for qubit control and spectroscopy, paving the way for scalable cryogenic quantum control architectures.
A promising route to superconducting artificial neural networks is a hybrid digital-analog architecture that combines digital single-flux-quantum (SFQ) communication with compact analog nonlinear processing. The study focused on the dynamic conversion of a discrete signal passing through a digital-to-analog-to-digital (DAD) converter, in which the role of the analog cell was performed by a Σ-neuron with a nonlinear transfer function-the basic cell of perceptron-like neural networks. Furthermore, the DAD converter, the elementary functional block of the hybrid architecture, combines a digital-to-analog converter (DAC) and an analog-to-digital converter (ADC), and reencodes the analog Σ-neuron wave forms as an SFQ pulse sequence. Circuit-level simulations demonstrate how input values encoded by SFQ pulse trains are converted into analog signal levels, transformed by the Σ-neuron, and mapped back to pulse-based outputs. As a key experimental step, we fabricated and characterized a redesigned Σ-neuron and measured a sigmoid-like transfer characteristic suitable for activation-function implementation. The extracted response was incorporated into system-level simulations to assess the influence of realistic device parameters on the conversion process. We delineate the operating-range matching requirements for the DAC, neuron, and ADC blocks, supporting the feasibility of the proposed interface as a building block for perceptron-like superconducting neural networks with digital inputs and outputs. Finally, we developed two perceptron networks, one using a mathematical sigmoid activation and the other the measured Σ-neuron transfer characteristic, which reached classification accuracies of 97.0% and 91.9%, respectively, on the MNIST handwritten digit dataset.