Gilberto García Del Angel

Dr. Gilberto García Del Angel

University of Cantabria, Santander, Cantabria, Spain
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
10 March 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Jose Adolfo Sainz-AjaJose Adolfo Sainz-Aja
Jose Adolfo Sainz-Aja
MMMarcos Sánchez Matías
Marcos Sánchez Matías
Laura Gonzalez SuarezLaura Gonzalez Suarez
Laura Gonzalez Suarez
Pablo TamayoPablo Tamayo
Pablo Tamayo
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
Carlos ThomasCarlos Thomas
Carlos Thomas
Modern society demands more sustainable and economical construction elements. One of the available options for manufacturing this type of element is the valorisation of end-of-life waste, such as, for example, the recycling of polymers used in industry. The valorisation of these wastes reduces costs and avoids the pollution generated by their landfill disposal. With the aim of helping to obtain this type of material, this work describes a methodology for recycling polyethylene for the manufacture of fibres that will later be used as reinforcement for structural concrete. These fibres are manufactured using an injection moulding machine. Subsequently, their physical and mechanical properties are measured and compared with those of the material before it is crushed and injected. The aim of this comparison is to evaluate the recycling process and analyse the reduction of the physical-mechanical properties of the recycled polyethylene in the process. Finally, to determine the properties of the fibre concrete, three types of concrete were produced: a control concrete, a reinforced concrete with 2 kg/m3 of fibres, and a reinforced concrete with 4 kg/m3 of fibres. The results show an enhancement of mechanical properties when the fibres are incorporated, particularly the tensile strength; and they also show excellent performance controlling cracking in concrete.

4 January 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
Ali Aghajanian SabbaghAli Aghajanian Sabbagh
Ali Aghajanian Sabbagh
Pablo TamayoPablo Tamayo
Pablo Tamayo
JRJokin Rico
Jokin Rico
Carlos ThomasCarlos Thomas
Carlos Thomas
Cement-treated bases are soils, gravels or manufactured aggregates mixed with certain quantities of cement and water in order to improve the characteristics of a base or sub-base layer. Due to the exploitation of natural aggregates, it is a matter of importance to avoid shortage of natural resources, which is why the use of recycled aggregates is a practical solution. In this paper we studied the feasibility of the use of untreated electric arc furnace slags and foundry sand in the development of cement-treated bases and slag aggregate concrete with a lower quantity of cement. We analyzed the physical, mechanical and durability characteristics of the aggregates, followed by the design of mixes to fabricate test specimens. With cement-treated bases, results showed an optimal moisture content of 5% and a dry density of 2.47 g/cm3. Cement-treated bases made with untreated slag aggregate, foundry sand and 4% of cement content showed an unconfined compression strength at seven days of 3.73 MPa. For siderurgical aggregate concrete mixes, compressive strength, modulus of elasticity and flexural strength tests were made. The results showed that the mixes had good mechanical properties but durability properties could be an issue.

8 March 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
Jose Adolfo Sainz-AjaJose Adolfo Sainz-Aja
Jose Adolfo Sainz-Aja
Pablo TamayoPablo Tamayo
Pablo Tamayo
ACAna Cimentada
Ana Cimentada
RCRene Bernardo Elias Cabrera-Cruz
Rene Bernardo Elias Cabrera-Cruz
Carlos ThomasCarlos Thomas
Carlos Thomas
Modern society requires a large number of metal components manufactured by sand casting, which involves the generation of a waste product known as Used Foundry Sand (UFS), of which approximately 100 Mt are generated on an annual basis. Virtually all UFS is currently landfilled, despite the economic and environmental cost overruns that this entails. Here, the recovery of UFS as fine aggregates for the manufacture of concrete is proposed. Since the presence of UFS will mainly affect the mortar that binds the aggregates in the manufacture of concrete, it was decided to isolate this fraction and study only the effect of UFS in mortars. This study evaluated a total of 32 different mixes combining different W/C ratios varying between 0.5 and 0.7 with 5 replacement ratios of natural sand by UFS: 0, 25, 50, 75 and 100%, respectively. The combined effect was evaluated of the W/C ratio and the replacement ratio on the workability, physical properties, mechanical properties, mechanical durability, and microstructure of the mortars. The incorporation of UFS decreases the workability of the mortars due to the absorption of the residue. For the physical properties of the mortars, density decreased and porosity and absorption increased at all replacement percentages. Flexural and compressive strength decreased when the replacement percentage was higher than 25 wt.%. In terms of mechanical durability, the mortars with UFS showed abrasion marks within the limits of the EN-1338 standard. From the results obtained, it is possible to conclude that the mortars with UFS require a higher amount of water. Therefore, while small replacement levels lead to a slight improvement in the mechanical properties, this trend breaks down for high replacement levels due to the negative effect of the high W/C ratios required. The authors recommend that for replacements higher than 25 wt.% of UFS, the W/C ratio has to be taken into consideration to obtain the same workability as the control mortar, although this decreases the mechanical properties.

4 February 2025 in Recycling
Verified
Journal Article
Open access
PDF file
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
RCRene Bernardo Elias Cabrera-Cruz
Rene Bernardo Elias Cabrera-Cruz
JRJulio Rolón
Julio Rolón
RRRoberto Pichardo Ramírez
Roberto Pichardo Ramírez
This review explores the potential of water hyacinth (WH) as a sustainable material in cement-based applications, focusing on its use as an addition, admixture, and fiber reinforcement. WH’s unique physical and chemical properties, such as high cellulose content and pozzolanic potential, make it suitable for bio-composites and eco-friendly concrete formulations. The present study highlights several promising findings, including the enhancement of the resulting mechanical properties and the reduction in their environmental impact when the WH is incorporated in controlled quantities. Challenges such as workability and durability issues at higher dosages are discussed. This review aims to bridge knowledge gaps and support WH’s adoption in sustainable construction practices.

28 December 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
Ali Aghajanian SabbaghAli Aghajanian Sabbagh
Ali Aghajanian Sabbagh
RCRene Bernardo Elias Cabrera-Cruz
Rene Bernardo Elias Cabrera-Cruz
Pablo TamayoPablo Tamayo
Pablo Tamayo
Jose Adolfo Sainz-AjaJose Adolfo Sainz-Aja
Jose Adolfo Sainz-Aja
Carlos ThomasCarlos Thomas
Carlos Thomas
In this work, the feasibility of partially and totally replacing natural sand with used foundry sand in self-compacting concrete was studied. Natural sand was replaced in 50% and 100% vol. by used foundry sand. The fresh state properties parameters analyzed in this study were slump flow, t500, V-funnel, Japanese ring and L-box following EFNARC guidelines. Results indicated an improvement in the fresh state properties when used foundry sand was utilized for partial and total replacement. The mechanical properties compressive strength and splitting tensile strength were obtained and analyzed at 7 and 28 days. Regarding the compressive strength, used foundry sand enhanced compressive strength by up to 67% compared to control concrete. For splitting tensile strength, the self-compacting concrete with 50% vol. of used foundry sand displayed a slight decrease (2.8%) compared with the control concrete. SEM images showed that the concretes with used foundry sand had a less porous and more compacted matrix than the control concrete. It was concluded that the incorporation of used foundry sand in large volumes can be utilized as a sustainable alternative natural fine aggregate.

23 June 2023 in Buildings
Verified
Journal Article
Open access
PDF file
EYebenezer yiwo
ebenezer yiwo
Pablo TamayoPablo Tamayo
Pablo Tamayo
Daniel Jato-EspinoDaniel Jato-Espino
Daniel Jato-Espino
Gilberto García Del AngelGilberto García Del Angel
Gilberto García Del Angel
Carlos ThomasCarlos Thomas
Carlos Thomas
This research aimed at ascertaining the performance of raw dura species of Palm Kernel Shells (PKS) in comparison to a different species of PKS (tenera) as a replacement for known aggregates for pervious lightweight concrete. Using limestones as the known aggregates, control pervious concrete was batched, and relevant tests were conducted. Major tests conducted on the composites concerned compressive, tensile, and flexural strength, as well as permeability, densities, and absorption. Logistic constraints on transporting the dura-PKS limited the quantity needed to ascertain the variety of replacements of the dura-PKS. With a 25% replacement known to be the most suitable ratio for related investigations, we adopted that ratio and compared to the extreme ratio of 100% dura-PKS. The tests revealed that a 100% replacement of known aggregates by the dura-PKS resulted in high porosity and permeability, although the resistances to compression, tension, and flexural loads read low for the same mixture. Instead, pervious concrete 25% of dura-PKS replacement yielded optimum water permeability rate and flexural and compressive stresses. However, the flakiness index recorded for the dura-PKS was almost half that of the tenera species and was not reflected in the mechanical properties as the results gave relatively lower strengths. The results in the case of the dura species do not differ significantly compared to the tenera-PKS in terms of strength and permeability.