Water-in-oil (W/O) emulsions have high potential for several industrial areas as delivery systems of hydrophilic compounds. In general, they are less studied than oil-in-water (O/W) systems, namely in what concerns the so-called fluid systems, partly due to problems of instability. In this context, this work aimed to produce stable W/O emulsions from a natural oil, sweet almond oil, to be further tested as vehicles of natural hydrophilic extracts, here exemplified with an aqueous cinnamon extract. Firstly, a base W/O emulsion using a high-water content (40/60, v/v) was developed by testing different mixtures of emulsifiers, namely Tween 80 combined with Span 80 or Span 85 at different contents. Among the tested systems, the one using a 54/46 (v/v) Span 80/Tween 80 mixture, and subjected to 12 high-pressure homogenizer (HPH) cycles, revealed to be stable up to 6 months, being chosen for the subsequent functionalization tests with cinnamon extract (1.25–5%; w/v; water-basis). The presence of cinnamon extract leaded to changes in the microstructure as well as in the stability. The antimicrobial and antioxidant analysis were evidenced, and a sustained behavior compatible with an extract distribution within the two phases, oil and water, in particular for the higher extract concentration, was observed.

Microencapsulation procedures have recently focused attention on designing novel microspheres via green synthesis strategies. The use of chitosan (CS) as an encapsulating material has increased interest due to its unique bioactive properties and the various crosslinking possibilities offered by their functional groups. The consolidation of the microspheres by physical crosslinking using sodium tripolyphosphate (TPP) combined with chemical crosslinking using vanillin (VA) open new opportunities in the framework of green dual crosslinking strategies. The developed strategy, a straightforward technique based on an aqueous medium avoiding complex separation/washing steps, offers advantages over the processes based on VA, mostly using water-in-oil emulsion approaches. Thus, in this work, the combination of TPP crosslinking (3, 5, and 10 wt.%) via spray-coagulation technique with two VA crosslinking methods (in situ and post-treatment using 1 wt.% VA) were employed in the preparation of microspheres. The microspheres were characterized concerning morphology, particle size, physicochemical properties, thermal stability, and swelling behavior. Results revealed that the combination of 5 wt.% TPP with in situ VA crosslinking led to microspheres with promising properties, being an attractive alternative for natural bioactives encapsulation due to the green connotations associated with the process.

The food industry depends on using different additives, which increases the search for effective natural or natural-derived solutions, to the detriment of the synthetic counterparts, a priority in a biobased and circular economy scenario. In this context, different natural emulsifiers are being studied to create a new generation of emulsion-based products. Among them, phospholipids, saponins, proteins, polysaccharides, biosurfactants (e.g., compounds derived from microbial fermentation), and organic-based solid particles (Pickering stabilizers) are being used or start to gather interest from the food industry. This chapter includes the basic theoretical fundamentals of emulsions technology, stabilization mechanisms, and stability. The preparation of oil-in-water (O/W) and water-in-oil (W/O) emulsions, the potential of double emulsions, and the re-emerging Pickering emulsions are discussed. Moreover, the most relevant natural-derived emulsifier families (e.g., origin, stabilization mechanism, and applications) focusing food applications are presented. The document is grounded in a bibliographic review mainly centered on the last 10-years, and bibliometric data was rationalized and used to better establish the hot topics in the proposed thematic.

Daucus carota L. extract is attracting interest as a natural colorant alternative. However, the presence of anthocyanins (ACNs), which are sensitive to pH changes, limits its application. To tackle this issue, water-in-oil-in-water (W₁/O/W₂) double emulsions are emerging as innovative solutions. Nevertheless, the problem of reaching robust colorant systems for industrial use still needs to be overcome. One important target is to reach a high coloring power, minimizing its impact on the final product. In this context, the effect of colorant concentration and the volume of the primary emulsion, two routes to increase the colorant power, on color attributes and stability, an important feature to reach a marketable product, was studied. The optimal experimental design was conducted to two optimal solutions, whether through heightened colorant concentration or primary emulsion volume: a 41/59 (W₁/O)/W₂ ratio with 11 wt.% colorant, and a 48/52 (W₁/O)/W₂ ratio with 6 wt.% colorant, respectively. A subsequent assessment of color and physical emulsion stability over 30 days pointed out the solution with the lower colorant concentration (6 wt.%) as the one with better performance (L*: 44.11 ± 0.03, a*: 25.79 ± 0.01, D_4;3: 9.62 ± 0.1 µm, and CI: 14.55 ± 0.99%), also minimizing the permeability of the colorant to the outer aqueous phase. Overall, these optimized emulsions offer versatile coloring solutions suitable for various industrial applications, such as food matrices and functional cosmetics.