Giulio Fabrizio Pappafico

Mr. Giulio Fabrizio Pappafico

Department of Pure and Applied Sciences, University of Urbino, Urbino, Marche, Italy
orcid

Research Focus & Metrics

Academic Career Length

21Years (2006-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
4 January 2020 in Landslides
Verified
Journal Article
Open access
PDF file
Samuele SegoniSamuele Segoni
Samuele Segoni
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
TLTania Luti
Tania Luti
FCFilippo Catani
Filippo Catani
The literature about landslide susceptibility mapping is rich of works focusing on improving or comparing the algorithms used for the modeling, but to our knowledge, a sensitivity analysis on the use of geological information has never been performed, and a standard method to input geological maps into susceptibility assessments has never been established. This point is crucial, especially when working on wide and complex areas, in which a detailed geological map needs to be reclassified according to more general criteria. In a study area in Italy, we tested different configurations of a random forest–based landslide susceptibility model, accounting for geological information with the use of lithologic, chronologic, structural, paleogeographic, and genetic units. Different susceptibility maps were obtained, and a validation procedure based on AUC (area under receiver-operator characteristic curve) and OOBE (out of bag error) allowed us to get to some conclusions that could be of help for in future landslide susceptibility assessments. Different parameters can be derived from a detailed geological map by aggregating the mapped elements into broader units, and the results of the susceptibility assessment are very sensitive to these geology-derived parameters; thus, it is of paramount importance to understand properly the nature and the meaning of the information provided by geology-related maps before using them in susceptibility assessment. Regarding the model configurations making use of only one parameter, the best results were obtained using the genetic approach, while lithology, which is commonly used in the current literature, was ranked only second. However, in our case study, the best prediction was obtained when all the geological parameters were used together. Geological maps provide a very complex and multifaceted information; in wide and complex area, this information cannot be represented by a single parameter: more geology-based parameters can perform better than one, because each of them can account for specific features connected to landslide predisposition.

Verified
Journal Article
Open access
PDF file
Mauro De DonatisMauro De Donatis
Mauro De Donatis
MAMauro Alberti
Mauro Alberti
MCMattia Cipicchia
Mattia Cipicchia
NGNelson Muñoz Guerrero
Nelson Muñoz Guerrero
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
SSSara Susini
Sara Susini
Field work on the search and characterization of ground effects of a historical earthquake (i.e., the Cagli earthquake in 1781) was carried out using terrestrial and aerial digital tools. The method of capturing, organizing, storing, and elaborating digital data is described herein, proposing a possible workflow starting from pre-field project organization, through reiteration of field and intermediate laboratory work, to final interpretation and synthesis. The case of one of the most important seismic events in the area of the northern Umbria–Marche Apennines provided the opportunity to test the method with both postgraduate students and researchers. The main result of this work was the mapping of a capable normal fault system with a great number of observations, as well as a large amount of data, from difficult outcrop areas. A GIS map and a three-dimensional (3D) model, with the integration of subsurface data (i.e., seismic profiles and recent earthquake distribution information), allowed for a new interpretation of an extensional tectonic regime of this Apennines sector, similar to one of the southernmost areas of central Italy where recent earthquakes occurred on 2016.

24 August 2021 in Water
Verified
Journal Article
Open access
PDF file
MBMaria Alexandra Bulzinetti
Maria Alexandra Bulzinetti
Samuele SegoniSamuele Segoni
Samuele Segoni
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
EMElena Benedetta Masi
Elena Benedetta Masi
GRGuglielmo Rossi
Guglielmo Rossi
Veronica TofaniVeronica Tofani
Veronica Tofani
Distributed physically based slope stability models usually provide outputs representing, on a pixel basis, the probability of failure of each cell. This kind of result, although scientifically sound, from an operational point of view has several limitations. First, the procedure of validation lacks standards. As instance, it is not straightforward to decide above which percentage of failure probability a pixel (or larger spatial units) should be considered unstable. Second, the validation procedure is a time-consuming task, usually requiring a long series of GIS operations to overlap landslide inventories and model outputs to extract statistically significant performance metrics. Finally, if model outputs are conceived to be used in the operational management of landslide hazard (e.g., early warning procedures), the pixeled probabilistic output is difficult to handle and a synthesis to characterize the hazard scenario over larger spatial units is usually required to issue warnings aimed at specific operational procedures. In this work, a tool is presented that automates the validation procedure for physically based distributed probabilistic slope stability models and translates the pixeled outputs in warnings released over larger spatial units like small watersheds. The tool is named DTVT (double-threshold validation tool) because it defines a warning criterion on the basis of two threshold values—the probability of failure above which a pixel should be considered stable (failure probability threshold, FPT) and the percentage of unstable pixels needed in each watershed to consider the hazard level widespread enough to justify the issuing of an alert (instability diffusion threshold, IDT). A series of GIS operations were organized in a model builder to reaggregate the raw instability maps from pixels to watershed; draw the warning maps; compare them with an existing landslide inventory; build a contingency matrix counting true positives, true negatives, false positive, and false negatives; and draw in a map the results of the validation. The DTVT tool was tested in an alert zone of the Aosta Valley (northern Italy) to investigate the high sensitivity of the results to the values selected for the two thresholds. Moreover, among 24 different configurations tested, we performed a quantitative comparison to identify which criterion (in the case of our study, there was an 85% or higher failure probability in 5% or more of the pixels of a watershed) produces the most reliable validation results, thus appearing as the most promising candidate to be used to issue alerts during civil protection warning activities.

21 June 2019 in Geosciences
Verified
Journal Article
Open access
PDF file
Mauro De DonatisMauro De Donatis
Mauro De Donatis
ONOlivia Nesci
Olivia Nesci
DSDaniele Savelli
Daniele Savelli
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
SSSara Susini
Sara Susini
The Sena Gallica Roman town was settled on the Adriatic coast in the 5th to 4th century BC. The choice of the site was largely influenced by the geomorphological and physiographic conditions near the Misa river mouth. The interactions among climate variation, river dynamics, and marine oscillation determined the anthropic development. At the same time, the new settlement strongly influenced the evolution of this sector in both medieval and in recent times. This work aims to highlight the geological setting and geomorphological evolution of the Senigallia area within the Northern Marche region, taking into account the main scientific literature and new studies to propose a new interpretation of the Holocene history.

30 November 2023 in Remote Sensing
Verified
Journal Article
Open access
PDF file
Stefano MorelliStefano Morelli
Stefano Morelli
Roberta BonìRoberta Bonì
Roberta Bonì
Mauro De DonatisMauro De Donatis
Mauro De Donatis
LMLucia Marino
Lucia Marino
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
Mirko FrancioniMirko Francioni
Mirko Francioni
Italy is famous for its one-of-a-kind landscapes and the many cultural heritage sites characterizing the story of its regions. In central Italy, during the medieval age, some of them were built on the top of high and steep cliffs, often on the top of ancient ruins, to protect urban agglomerations, goods and people. The geographical locations of these centers allowed them to maintain their original conformation over time, but, at the same time, exposed them to a high risk of landslides. In this context, this research aimed to present an integrated and low-cost approach to study the potential landslide phenomena affecting two medieval towns. Field surveys and mapping were carried out through the use of innovative digital mapping tools to create a digital database directly on the field. Data gathered during field surveys were integrated with GIS analyses for an improved interpretation of the geological and geomorphological features. Due to the inaccessibility of the cliffs surrounding the two villages, a more detailed analysis of these areas was performed through the use of unmanned aerial vehicle-based photogrammetry, while advanced differential synthetic aperture radar interferometry (A-DInSAR) interpretation was undertaken to verify the stability of the buildings in proximity to the cliffs and other potential active failures. The results of the study highlighted the similar geometry and structural settings of the two areas. Kinematically, the intersection of three main joint sets tends to detach blocks (sometimes in high volumes) from the cliffs. The A-DInSAR analysis demonstrated the presence of a landslide failure along the northwest side of the Monte San Martino town. The buildings in proximity to the cliffs did not show evidence of movements. More generally, this research gives insights into the pro and cons of different survey and analysis approaches and into the benefits of their procedural integration in space and in time. Overall, the procedure developed here may be applied in similar contexts in order to understand the structural features driving slopes’ instabilities and create digital databases of geological/monitoring data.

13 October 2023 in Geomatics
Verified
Journal Article
Open access
PDF file
Mauro De DonatisMauro De Donatis
Mauro De Donatis
GPGiulio Fabrizio Pappafico
Giulio Fabrizio Pappafico
Open-source software applications, especially those useful for GIS, have been used in the field of geology both in research and teaching at the University of Urbino for decades. The experiences described in this article range from land-surveying cases to cartographic processing and 3D printing of geological models. History of their use and development is punctuated by trials, failures, and slowdowns, but the idea of using digital tools in areas where they are traditionally frowned upon, such as in soil geology, is now rooted in and validated by applications in projects of various types. Although the current situation is not definitive, given that the evolution of information technology provides increasingly faster tools that are performance-oriented and easier to use, this article aims to contribute to the development of methodologies through an exchange of information and experiences.