In the past few decades, the fabrication of solar cells has been considered as one of the most promising ways to meet the increasing energy demands to support the development of modern society as well as to control the environmental pollution caused by the combustion of fossil fuels. A number of different types of solar cells, such as silicon solar cells (Si), Cu-based chalcogenides (Cu(In,Ga)Se2/Cu2ZnSn(S,Se)4) thin film solar cells (TFSC), dye-sensitized solar cells (DSSC), organic solar cells (OSC), and perovskite solar cells (PVSC), have been implemented in the photovoltaic technology. However, the high manufacturing costs of solar cells is one of the major obstacles for their wide-scale application. In this regard, inkjet printing has attracted tremendous interest in both academic research and industrial applications among all the various kinds of fabrication techniques and is believed to be one of the most promising methods to meet these requirements. The great advantages of inkjet printing are that the process is contactless, maskless and has a high material utilization rate, and good scalability, and compatibility of the roll-to-roll process. Additionally, the maskless nature of inkjet printing allows for freedom of design, which enables multi-functional properties of solar cells (i.e., power source and artwork) to be realized. In this review, the recent advances in inkjet printing with the deposition of different layers of various types of solar cells are summarized in detail and prospectives for the future development of printed/flexible solar cells are covered.
All-inorganic lead halide perovskite nanocrystals have great potential in optoelectronics and photovoltaics. However, their biological applications have not been explored much owing to their poor stability and shallow penetration depth of ultraviolet (UV) excitation light into tissues. Interestingly, the combination of all-inorganic halide perovskite nanocrystals (IHP NCs) with nanoparticles consisting of lanthanide-doped matrix (Ln NPs, such as NaYF4:Yb,Er NPs) is stable, near-infrared (NIR) excitable and emission tuneable (up-shifting emission), all of them desirable properties for biological applications. In addition, luminescence in inorganic perovskite nanomaterials has recently been sensitized via lanthanide doping. In this review, we discuss the progress of various Ln-doped all-inorganic halide perovskites (LnIHP). The unique properties of nanoheterostructures based on the interaction between IHP NCs and Ln NPs as well as those of LnIHP NCs are also detailed. Moreover, a systematic discussion of basic principles and mechanisms as well as of the recent advancements in bio-imaging based on these materials are presented. Finally, the challenges and future perspectives of bio-imaging based on NIR-triggered sensitized luminescence of IHP NCs are discussed.
The F–P resonator enhances the lasing performances of Tm-doped C(NH 2 ) 3 PbI 3 perovskite thin films. It exhibits a high Q -factor value with a low threshold. When compared to previous literature, this GAPbI 3 :Tm-based F–P resonator achieves better lasing performances.