This paper proposes the use of X-ray computed tomography (µCT, xCT) measurements together with finite element method (FEM) numerical modelling to assess bond failures mechanism of fiber-reinforced fine-grain concrete. Fiber-reinforced concrete is becoming popular for application in civil engineering structures. A dynamically developing topic related to concretes is the determination of bond characteristics. Nowadays, modern technologies allow inspecting the inside of the element without the need to damage its structure. This paper discusses the application of computed tomography in order to identify damage occurring in the structure of fiber-reinforced fine-grain concrete during bond failure tests. The publication is part of a larger study to determine the bonding properties of Ukrainian steel fibers in fine-grain concrete. The authors focused on the visual evaluation of sections obtained from tomographic data. Separately, the results of volumetric analysis were presented to quantitatively assess the changes occurring in the matrix structure. Finite element analysis is an addition to the substantive part and allows us to compare real damage areas with theoretical stress concentration areas. The result of the work is the identification of a path that allows verification of the locations where matrix destruction occurs.
Modeling the meso-scale behavior of a material allows one to answer many problems in an inductive reasoning approach. By simulating the behavior of the sample, researchers can correct the overall behavior of the material. The purpose of this article was to gather the main information linking the issue of tomographic imaging to the modeling of damage mechanisms. This paper addresses the topic of meso-scale modeling of cementitious materials. The authors have mapped the interconnectedness of the issues of cementitious materials and X-ray computed tomography (µCT) according to the Web of Science database. The main interconnecting threads are indicated. The authors focused on the use of µCT. The theoretical basis for conducting tomographic measurements is presented. Reference was made to the basics of physics and mathematics in X-ray projection and data reconstruction. Tools and analyses for data processing are indicated. The benefits of in situ µCT are indicated with reference to the practical application of the method. In addition, the main developments of recent years in the most widely used computational methods for meso-scale models are presented.
This paper proposes the use of terrestrial laser scanning (TLS) measurements together with finite element method (FEM) numerical modeling to assess the current technical condition. The main aim of the paper was to evaluate the effect of point cloud size reduction on the quality of the geometric model and the ability to represent the corrosion level in assessing its load-carrying capacity. In this study, a standard scanning was performed on a historical object and a point cloud of a selected corroded element was generated. In order to further process the data, gradual reductions were made in the number of points from which meshes representing the geometry of the selected beam were created. Inaccuracy analyses of the meshes generated on the reduced point clouds were performed. Numerical analysis was then conducted for the selected mesh generated from the reduced point cloud. The results identified the locations of maximum stresses. The presented analysis showed that by developing the presented measurement and computational technique, laser scanning can be used to determine the degree of corrosion of hard-to-reach steel elements.
The paper refers to studies of the structure of high-performance concrete with polypropylene fibre at different dosages. The authors see a research gap in the study of the effect of adding polypropylene fibre on the parameters of concrete exposed to high temperatures. The study takes into account the thermal effect—groups of samples were heated to 200 °C, 400 °C and 600 °C. The authors carried out basic tests to describe the changes in density, ultrasonic tests, uniaxial compression strength tests and tensile tests by splitting. The positive effect of polypropylene fibres is mainly observed between 20 °C and 200 °C. The melting of polypropylene fibres causes a delay in the development of micro-cracks in the structure of these concretes compared to HPC. Adding polypropylene fibres to the mixtures also increased the speed of ultrasonic wave propagation in the medium. The research was deepened with tomographic imaging. A description of the splitting surface was carried out. The results of tensile by splitting tests clearly show an increase in the relative failure area for unheated concretes in proportion to the number of fibres used. Changes in splitting surfaces under the influence of temperature are graphically illustrated. Furthermore, differences in the samples under the influence of heating at high temperatures are presented. Finally, the porosity development of all sample groups before and after heating at all temperatures is described.
This paper presents an evaluation of the morphology of fertilizer-grade and prill-grade ammonium nitrate(V). All samples were analyzed using X-ray powder diffraction (XRD), scanning electron microscopy (SEM) and tomography techniques. The XRD results revealed that despite various provenances, all samples exhibited similar Pmmm symmetry and diffraction patterns. SEM images indicated that prill ammonium nitrate(V) showed a more complex external and internal crystal structure than fertilizer-grade counterparts. Furthermore, tomography analysis revealed that each prill ammonium nitrate(V) sample demonstrated distinct porosity characteristics, including varying pore sizes and distribution patterns. Both methods confirmed that fertilizer-grade ammonium nitrate(V) in the cross-section had a pumice structure, and porous prill ammonium nitrate(V) had a rather complex structure, with a central cavity observed only in the case of Sample 4. The appearance of a central cavity can be explained by the different conditions or manufacturing processes of porous prill ammonium nitrate(V). Moreover, the fertilizer-type ammonium nitrate(V) exhibited the lowest surface-to-volume ratio of ca. 21% compared to the porous-type ammonium nitrate(V). This, together with the lowest surface area of ca. 116 mm2, confirmed the lowest absorption capacity of the fertilizer-grade ammonium nitrate(V) disclosed by the ammonium nitrate(V) producer.