As a commonly harmful product produced in industrial production, the sensitive detection of SO2 is a crucial safety consideration with adverse impacts on human health. However, constructing MXene-based gas sensors for rapid detection at room temperature is still challenging. In this work, we demonstrate a V2CTx gasistor (gas memristor) with a millisecond-level cycle (360 ms) for SO2 ultrafast detection, and meanwhile, the function of gas response and memory is realized. Specifically, the synaptic plasticity of paired-pulse facilitation (PPF) behavior has been applied to identify the different types of gases instead of gas sensitivity. Consistent with gas response performance, the gasistor displays the highest pulse-controlled PPF ratio (210.4%) under 10 ms electric pulse interval for 10 ppm SO2, 1.34 times that under air. Also, the V2CTx gasistor exhibits excellent repeatability and good stability. Furthermore, this strategy provides a great application prospect in rapid detection and medical treatment for toxic gases and artificial sensing memory.
A Cr2CTx-based gas sensor exhibited high selectivity for NO2 at room temperature. DFT unveiled the adsorption capacity of different gases consistent with experimental results.
With the development of diamond technology, its application in the field of electronics has become a new research hotspot. Hydrogen-terminated diamond has the electrical properties of P-type conduction due to the formation of two-dimensional hole gas (2DHG) on its surface. However, due to various scattering mechanisms on the surface, its carrier mobility is limited to 50–200 cm2/(Vs). In this paper, the effects of process parameters (temperature, CH4 concentration, time) on the electrical properties of hydrogen-terminated diamond were studied by microwave plasma chemical vapor deposition (CVD) technology, and hydrogen-terminated diamond with a high carrier mobility was obtained. The results show that homoepitaxial growth of a diamond film on a diamond substrate can improve the carrier mobility. Hydrogen-terminated diamond with a high carrier mobility and low sheet resistance can be obtained by homoepitaxial growth of a high-quality diamond film on a diamond substrate with 4% CH4 concentration and hydrogen plasma treatment at 900 ℃ for 30 min. When the carrier concentration is 2.03 × 1012/cm2, the carrier mobility is 395 cm2/(Vs), and the sheet resistance is 7.82 kΩ/square, which greatly improves the electrical properties of hydrogen-terminated diamond. It can enhance the transmission characteristics of carriers in the conductive channel, and is expected to become a potential material for application in devices, providing a material choice for its application in the field of semiconductor devices.