Gwang-Gook Kim

Dr. Gwang-Gook Kim

Korean Institute of Industrial Technology
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
8 December 2021 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
DKDong-Yoon Kim
Dong-Yoon Kim
IHIn-Sung Hwang
In-Sung Hwang
DKDong Cheol Kim
Dong Cheol Kim
Young-Min KimYoung-Min Kim
Young-Min Kim
Junhong ParkJunhong Park
Junhong Park
Gas metal arc welding of aluminum 5083 alloys was performed using three new welding wires with different magnesium and manganese contents and compared with commercial aluminum 5183 alloy filler wire. To investigate the effect of magnesium and manganese contents on the mechanical properties of welds, mechanical properties were evaluated through tensile strength, bending, and microhardness tests. In addition, the microstructure and chemical composition were analyzed to compare the differences between each weld. The tensile strengths of welds using aluminum alloy filler wires with a magnesium content of 7.33 wt.% (W1) and 6.38 wt.% (W2), respectively, were similar. The tensile strength and hardness of welds using wires with a similar magnesium content, but a different manganese content of 0.004 wt.% (W2) and 0.46 wt.% (W3), respectively, were higher in the wire with a high manganese content. Through various mechanical and microstructural property analyses, when the magnesium content of the filler wire was 6 wt.% or more, the manganese content, rather than the magnesium content, had a dominant effect on the strengthening of the weld.

9 July 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
Young-Min KimYoung-Min Kim
Young-Min Kim
DKDong-Yoon Kim
Dong-Yoon Kim
JPJong-Kyu Park
Jong-Kyu Park
Junhong ParkJunhong Park
Junhong Park
JYJiyoung Yu
Jiyoung Yu
In gas–metal arc welding (GMAW), the welding quality is influenced by various factors, including the welding conditions and external environment. Achieving a high welding quality requires careful observation and control. Welding monitoring is crucial for validating a planned welding process and assessing its quality. This study introduces a vision system for the online acquisition of clear molten pool images. It uses a small camera equipped with a complementary metal-oxide-semiconductor sensor during GMAW, as well as a method for constructing this system. The proposed vision system does not require triggering using devices such as field-programmable gate arrays, facilitating lower costs and online quality monitoring under various welding conditions during mild-steel GMAW. Accurate measurement of radiation from the weld is essential for clear observation of the molten pool during welding, emphasizing the importance of selecting an optical system with appropriate lenses and filters. In addition, appropriate digital camera parameters must be set for monitoring. High-quality images were successfully captured using the proposed method, and the image quality was evaluated using the blind/referenceless image spatial quality evaluator algorithm.

10 December 2024 in Metals
Verified
Journal Article
Open access
PDF file
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
DKDong-Yoon Kim
Dong-Yoon Kim
JYJiyoung Yu
Jiyoung Yu
Gas metal arc welding (GMAW) is widely used for its productivity and ease of automation across various industries. However, certain tasks in shipbuilding and heavy industry still require manual welding, where quality depends heavily on operator skill. Defects in manual welding often necessitate costly rework, reducing productivity. Vision sensing has become essential in automated welding, capturing dynamic changes in the molten pool and arc length for real-time defect insights. Laser vision sensors are particularly valuable for their high-precision bead profile data; however, most current models require offline inspection, limiting real-time application. This study proposes a deep learning-based system for the real-time monitoring of both the molten pool and weld-bead profile during GMAW. The system integrates an optimized optical design to reduce arc light interference, enabling the continuous acquisition of both molten pool images and 3D bead profiles. Experimental results demonstrate that the molten pool classification models achieved accuracies of 99.76% with ResNet50 and 99.02% with MobileNetV4, fulfilling real-time requirements with inference times of 6.53 ms and 9.06 ms, respectively. By combining 2D and 3D data through a semantic segmentation algorithm, the system enables the accurate, real-time extraction of weld-bead geometry, offering comprehensive weld quality monitoring that satisfies the performance demands of real-time industrial applications.

30 May 2023 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
TKTaehoon Kang
Taehoon Kang
DKDong-Yoon Kim
Dong-Yoon Kim
Young-Min KimYoung-Min Kim
Young-Min Kim
JYJiyoung Yu
Jiyoung Yu
Junhong ParkJunhong Park
Junhong Park
In gas metal arc welding (GMAW), the weld bead shape is an important factor that is directly related to the weld quality of welded joints. This study investigates the effects of process parameters, including welding speed (WS) and leading and trailing wire feed rates (WFR), on the weld bead shape, including the leg length and penetration depth, in the tandem GMAW of aluminum 5083-O alloy. An asynchronous direct current–direct current pulse tandem GMAW system and a tandem GMAW torch were designed and applied to improve welding productivity and welding quality. Response surface methodology was used to analyze the effects of the process parameters on the weld bead shape and to estimate regression models for predicting the weld bead shape. As a result of observing arc behavior using a high-speed camera, it was confirmed that the leading WFR affects the penetration depth and the trailing WFR affects the leg length. The coefficient of determination (R2) of the regression models was 0.9414 for the leg length and 0.9924 for the penetration depth. It was also validated that the estimated models were effective in predicting the weld bead shape (leg length and penetration depth) representative of weld quality in the tandem GMAW process.

28 February 2023 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
DKDong-Yoon Kim
Dong-Yoon Kim
JHJune Hyung Hwang
June Hyung Hwang
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
Young-Min KimYoung-Min Kim
Young-Min Kim
JYJiyoung Yu
Jiyoung Yu
Junhong ParkJunhong Park
Junhong Park
Weld shape and size generally determine the quality of gas metal arc welding. Auto parts manufacturers prescribe the size and shape of the weld because they can indicate the mechanical properties of the weld. It is impossible to evaluate the quality of all welds through destruction inspection. Therefore, research on welding quality inspection using laser vision sensors as a non-destructive inspection method is underway. Although the external profile of the weld can be measured using a laser vision sensor, studies to predict the weld strength are insufficient. In this study, an artificial neural network (ANN) model was developed to predict the welding strength of the lap-fillet weld of an aluminum alloy. Input date for weld size was obtained in two ways. In the first method, a bead profile was acquired using a laser vision sensor, whereas the size of the weld was obtained through the acquired bead profile. In the second method, the size of the weld was obtained directly from cross-section analysis. The output data on the strength of the weld was obtained through a tensile shear test. Two models for predicting the tensile shear strength based on ANN were developed. By predicting the tensile strength of both models, the average error rate was within 10%, but the prediction accuracy using the laser vision sensor was better than that of the cross-sectional method.

30 October 2021 in Journal of Welding and Joining
Verified
Journal Article
Open access
PDF file
HLHyung Won Lee
Hyung Won Lee
JYJiyoung Yu
Jiyoung Yu
Gwang-Gook KimGwang-Gook Kim
Gwang-Gook Kim
Young-Min KimYoung-Min Kim
Young-Min Kim
IHIn-Sung Hwang
In-Sung Hwang
Young-Min KimYoung-Min Kim
Young-Min Kim
Gas metal arc (GMA) welding is widely used in the machinery industry. The quality of a welded joint is affected by the penetration of root pass welding in the V-groove joint. Automation using GMA welding is continuously required, and root pass welding automation is required to automate the entire welding process. In particular, the development of a prediction model that can ensure full penetration back-bead is required for the automation of root pass welding. In this study, a convolutional neural network (CNN) model was applied to predict the occurrence of back-bead in V-groove butt joint GMA root pass welding. The bead profile was measured using a laser vision sensor system and it was used as the input data for the prediction model, and the bead occurrence was used as the output data for the model. A total of 12,873 bead profiles were extracted and pre-processed through cutting, resizing, and thresholding. The CNN model consists of nine layers, and performs three convolution and two pooling operations. The accuracy of the prediction model was 99.5%, and through this study, it was demonstrated that the quality of root-pass welding can be controlled by using convolutional neural network and it can contribute to automation.