Multiple resonance modes in an optical absorber are necessary for nanophotonic devices and encounter a challenge in the visible range. This article designs a multiple-channel plasmonic metamaterial absorber (PMA) that comprises a hexagonal arrangement of metal-shell nanorods in a unit cell over a continuous thin metal layer, operating in the visible range of the sensitive refractive index (RI) and temperature applications. Finite element method simulations are utilized to investigate the physical natures, such as the absorptance spectrum, magnetic flux and surface charge densities, electric field intensity, and electromagnetic power loss density. The advantage of the proposed PMA is that it can tune either three or five absorptance channels with a narrowband in the visible range. The recorded sensitivity and figure of merit (S, FOM) for modes 1–5 can be obtained (600.00 nm/RIU, 120.00), (600.00 nm/RIU, 120.00 RIU−1), (600.00 nm/RIU, 120.00 RIU−1), (400.00 nm/RIU, 50.00 RIU−1), and (350.00 nm/RIU, 25.00 RIU−1), respectively. Additionally, the temperature sensitivity can simultaneously reach 0.22 nm/°C for modes 1–3. The designed PMA can be suitable for RI and temperature sensing in the visible range.
In this study, locally grown bamboo ( Gigantochloa spp.) was used as feedstock for pyrolysis production of biochar under various pyrolysis temperatures (400–800°C). The resultant biochars were tested for their performance in adsorptive removal of the methylene blue (MB) dye. The scope of the adsorption experiment includes the effects of adsorbent dosage, solution pH, initial adsorbate concentration, and contact time. The adsorption data confirmed that pyrolysis temperature has a significant effect on adsorptive performance, whereas biochar pyrolysed at 500°C (BC500) has the highest adsorptive performance with the maximum adsorption capacity (derived from the Langmuir model) being 86.6 mg g-1. Basic characterisations (SEM, EDX, XRD, FTIR, and BET) were carried out for BC500 where FTIR and SEM confirmed the adsorption of MB onto the biochar, while the BET data showed the reduction of the BET surface area, total pore volume, and pore diameter after the adsorption process.