Alkaloids are aromatic hydrocarbons with nitrogen as heteroelements in the ring structure that are responsible for bonding with the metal surface and help to reduce corrosion of metals such as mild steel (MS) in an acidic medium. In this study, the alkaloid of Rhynchostylis retusa (RR) was extracted by solvent extraction method and confirmed by chemical test as well as FTIR spectroscopic test. Extracted alkaloids were tested as green inhibitors for the MS corrosion in a 1.0 M H₂SO₄ solution. The inhibition efficiency (IE) of alkaloid extracts of RR was studied by the weight loss measurement method and electrochemical polarization method. Results showed that the maximum IE in the gravimetric method was 87.51% in 1000 ppm solution at 6 h immersion time. Open circuit potential (OCP) and potentiodynamic polarization results indicated that the extracted alkaloids acted as a mixed type of inhibitor. IE by polarization method was found to be 93.24% for the sample immersed for 6 h. The temperature effect study reveals that inhibitors can work only below 35 °C. Alkaloids of RR can be successfully extracted and used as corrosion inhibitors for MS in an acidic medium below 35 °C.

Two different types of alkaloids are successfully extracted from two plants Artemisia vulgaris (AV) and Solanum tuberosum (ST) in the laboratory and used as corrosion inhibitors for mild steel samples. The corrosion inhibition potential of these alkaloids is determined by weight loss and potentiodynamic polarization measurement methods. Based on the weight loss measurement study of a sample immersed for 6 h in 1000 ppm inhibitor solution of AV and ST alkaloids, the corrosion inhibition efficiency is found to be 92.58% and 90.79%, respectively. The potentiodynamic polarization measurement shows 88.06% and 83.22% corrosion inhibition efficiency for AV and ST alkaloids, respectively, for the sample immersed for 1 h in 1000 ppm inhibitor solution. These promising efficiency and suitable immersion time effect can lead to the development of good green inhibitors.

Technological advancement is accompanied by excessive consumption of fossil fuels and affluent uses of chemical substances in many sectors, including transportation and manufacturing companies, and so on. Being an exhaustible resource, the excessive use of fossil fuels and of chemical substances may lead to a serious energy crisis in the long run, and it may additionally impose environmental pollution. Attempts have been made in the solution of such serious issues from every nook and corner. Nonetheless, no method has been found to be a panacea in waste water treatment and subsequent beneficiaries. One of the attempts in the solution to such issues is the application of photocatalytic technology, which could serve as a dual function in environmental remediation and clean energy production. A photocatalytic fuel cell is a tool developed for the recovery of energy from organic wastes. A rational cell construction needs the fabrication of photoelectrodes, the design of a photoanode and a photocathode chamber, in addition to an ion-transport membrane for pollution treatment and electricity generation. In this review, comprehensive fundamental assessments and recent developments in the design of photocatalytic fuel cells, their applications, future prospects, and challenges are covered.

In this study, copper oxide nanoparticles (CuO NPs), zinc oxide nanoparticles (ZnO NPs), and copper oxide/zinc oxide nanocomposites (CuO@ZnO NPs) were synthesized by green synthetic route where bioactive compounds inherently present in the leaf extract of Artemisia vulgaris act as stabilizing and reducing agents. Phytochemicals present in leaf extract were assessed by qualitative chemical tests and spectroscopic measurements. UV-visible spectroscopy, Fourier Transform Infrared (FTIR) spectroscopy, Energy Dispersive X-ray (EDX) spectroscopy, X-ray Diffraction (XRD), and Field Emission Scanning Electron Microscopy (FESEM) were used to characterize the as-synthesized nanomaterials, i.e., CuO, ZnO, and CuO@ZnO NPs. XRD pattern revealed the crystalline nature of nanoparticles. Based on the DebyeScherrer formula, the sizes of CuO NPs, ZnO NPs, and CuO@ZnO NCs were found to be 17.24, 20.74, and 22.50nm, respectively. The band gap of the as-prepared nanomaterials was measured using the Tauc plot. Using the nanomaterials, MB degradation was studied at room temperature under exposure to UV light. The degradation efficiency of CuO, ZnO, and 2 CuO@ZnO was found to be 52, 68, and 98, respectively. Kinetic degradation process reveals that the CuO@ZnO NCs showed a better photocatalytic activity on MB dye with the degradation constant of 0.04124min⁻¹ compared to those of either constituent. Based on the findings, it was found that CuO@ZnO nanocomposites have the potential to degrade MB as an organic dye and can be used for wastewater treatment.