3D printing PLA wastes were recovered from a well-known reference grade and from different sources. The recovered wastes were subjected to an energic washing step and then reprocessed into films by melt-extrusion, followed by compression molding to simulate the industrial processing conditions. The obtained materials were characterized and the optical, structural, thermal and crystallization behavior are reported. The mechanical recycling process leads to an increase of the crystallinity and a decrease of the intrinsic viscosity of the formulations, particularly in the sample based on blends of different 3D-PLA wastes. Moreover, the obtained films were disintegrated under composting conditions in less than one month and it was observed that recycled materials degrade somewhat faster than the starting 3D-PLA filament, as a consequence of the presence of shorter polymer chains. Finally, to increase the molecular weight of the recycled materials, the 3D-PLA wastes were submitted to a solid-state polymerization process at 110, 120, and 130 °C, observing that the recycled 3D-wastes materials based on a well-known reference grade experiences an improvement of the intrinsic viscosity, while that coming from different sources showed no significant changes. Thus, the results show that 3D printing PLA products provides an ideal environment for the implementation of distributed recycling program, in which wastes coming from well-known PLA grades can successfully be processed in films with good overall performance.
The objective of this work is to evaluate the reprocessing of PLA 3D printing waste from different origins, into filaments and films, and without the addition of any additive. Two types of waste were considered: a blend of different printing wastes (masks, visors, other components) of personal protective equipment coming from an association of Spanish coronamakers, and PLA waste from a single known commercial source. Both types of materials were subjected to repeated extrusion cycles and processed into films by compression molding. Samples were characterized after each cycle and their mechanical and viscosity properties evaluated. Diffusion-ordered NMR spectroscopy (DOSY) experiments were also carried out to estimate molecular weights. The results show a better performance for the PLA waste from the known origin, capable of withstanding up to three re-extrusion cycles per two for the waste blending, without significant degradation. Additionally, a model to address collection and mechanical recycling cycles under two different scenarios (full traceability and not full traceability) was proposed.
The circular economy model offers great opportunities to companies, as it not only allows them to capture additional value from their products and materials, but also reduce the fluctuations of price-related risks and material supply. These risks are present in all kind of businesses not based on the circular economy. The circular economy also enables economic growth without the need for more resources. This is because each unit has a higher value as a result of recycling and reuse of products and materials after use. Following this circular economics framework, the Polytechnic University of Madrid (Universidad Politécnica de Madrid, UPM) has adopted strategies aimed at improving the circularity of products. In particular, this article provides the result of obtaining recycled PLA filament from waste originating from university 3D FFF (fused filament fabrication) printers and waste generated by “Coronamakers” in the production of visors and parts for PPEs (Personal Protective Equipment) during the lockdown period of COVID-19 in Spain. This filament is used in the production of 3D printed parts that university students use in their classes, so the circular loop is closed. The obtained score of Material Circularity Indicator (MCI) of this material has been calculated, indicating its high level of circularity.
To move closer to achieving the United Nations’ Sustainable Development Goals (SDGs), a change from the traditional paradigm of the linear economy towards the circular economy is of paramount importance. One of the key promoters of this shift is servitization, which involves a shift from a purely transactional product-selling model to customer satisfaction through providing the service inherent to the product. Although servitization is a promising field for academics and practitioners, its adoption faces different challenges and drivers that need to be understood and addressed. A latent issue is the lack of common language around the topic. In the present study, a systematic literature review has been conducted to allow the identification and classification of the main challenges and drivers. Based on the findings, we propose a classification framework that identifies, classifies, and groups common challenges and drivers to different areas of knowledge on servitization through intensity heat maps. From a managerial point of view, our results highlight the importance of embracing servitization as a collective effort from the different departments within a company.
The importance of 3D printing is growing rapidly. A recent example of this increasing importance involves the fight against the Covid-19 pandemic, in which 3D printing has helped to overcome the shortage of critical supplies. However, 3D printing generates large amounts of plastic waste that could pose an environmental problem, thus making it necessary to find methods for the correct management of such wastes. The combination of additive manufacturing and distributed mechanical recycling can contribute to the development of a more circular economy. The main goals of this work were to characterize the poly(lactic acid) (PLA) wastes generated in 3D printing processes and evaluate the effect of their heterogeneity on the technical feasibility of mechanical recycling. Two PLA 3D printing wastes were used: waste coming from a well-known PLA grade, and a mixture of PLA 3D printing residues coming from an association of coronamakers in Madrid. Recycled material obtained from the waste of a well-known PLA grade shows good properties, similar to those for non-used material. However, the recycled material obtained from mixed PLA waste shows lower viscosity values, higher crystallization ability and less transparency. These results highlight that special attention should be paid to the sorting and characterization of the 3D wastes, to obtain recycled materials with good properties.
Packaging plays an important role in the movement and distribution of products along the supply chain by safely ensuring proper product delivery, achieving economies of scale through standardization, and serving as a selling tool. Packaging presents associated high economic and environmental costs for transportation, picking, handling, storing, and returning products. Considering the high demand for paper and cardboard worldwide and the projected increase during the next decade, there is a latent need to prevent and reduce the possible waste from packaging. The return of cardboard boxes used for packaging to the product suppliers could be a feasible solution to tackle this issue; however, it seems to be a disposable cost that companies assume when delivering products to highly fragmented markets. This research intends to understand the role that nanostores play in affecting whether or not cardboard packages are returned after receiving the products from suppliers and how likely shopkeepers are to support closing the loops in the current supply chain system. A survey with 27 questions related to recycling, reusing, reselling, returning, and waste was designed and applied to three hundred thirty-seven shopkeepers in two stages. The data was analyzed through plot analysis and descriptive statistical methods. The results show that some dynamic drivers and intervention schemes may increase the current returnability rate of packaging (11%) to the level of reuse rates (75% in these small, family-owned retailers). We found that thicker cardboard packages foster reuse and recycling rates. Based on the results, we propose that startups close the gap to trigger returnability and recycling while the government develops regulations to support these initiatives.