Understanding the factors that contribute to slope failures, such as soil saturation, is essential for mitigating rainfall-induced landslides. Cost-effective capacitive soil moisture sensors have the potential to be widely implemented across multiple sites for landslide early warning systems. However, these sensors need to be calibrated for specific applications to ensure high accuracy in readings. In this study, a soil-specific calibration was performed in a laboratory setting to integrate the soil moisture sensor with an automatic monitoring system using the Internet of Things (IoT). This research aims to evaluate a low-cost soil moisture sensor (SKU:SEN0193) and develop calibration equations for the purpose of slope model experiment under artificial rainfall condition using silica sand. The results indicate that a polynomial function is the best fit, with a coefficient of determination (R2) ranging from 0.918 to 0.983 and a root mean square error (RMSE) ranging from 1.171 to 2.488. The calibration equation was validated through slope model experiments, with soil samples taken from the models after the experiment finished. Overall, the moisture content readings from the sensors showed approximately a 12% deviation from the actual moisture content. The findings suggest that the cost-effective capacitive soil moisture sensor has the potential to be used for the development of landslide early warning system.
Understanding the factors that contribute to slope failures, such as soil saturation, is essential for mitigating rainfall-induced landslides. Cost-effective capacitive soil moisture sensors have the po-tential to be widely implemented across multiple sites for landslide early warning systems. How-ever, these sensors need to be calibrated for specific applications to ensure high accuracy in readings. In this study, a soil-specific calibration was performed in a laboratory setting to integrate the soil moisture sensor with an automatic monitoring system using the Internet of Things (IoT). This re-search aims to evaluate a low-cost soil moisture sensor (SKU:SEN0193) and develop calibration equations for the purpose of slope model experiment under artificial rainfall condition using silica sand. The results indicate that a polynomial function is the best fit, with a coefficient of determi-nation (R²) ranging from 0.92 to 0.98 and a root mean square error (RMSE) ranging from 1.17 to 2.67. The calibration equation was validated through slope model experiments, with soil samples taken from the model after the experiment finished. Overall, the moisture content readings from the sensors showed approximately a 10% deviation from the actual moisture content. The findings suggest that the cost-effective capacitive soil moisture sensors has the potential to be used for the development of landslide early warning system.
Precise precipitation information underpins hydrological modeling, water resource planning, and hazard mitigation; yet, gauge coverage in many Indonesian catchments is sparse. The GPM-IMERG product provides 0.1°/30-min rainfall estimates, however, systematic biases limit its operational value. Five benchmark correction techniques were evaluated: Linear Scaling (LS), Linear Regression (LR), Genetic-Algorithm-based Correction Factor (GA-CF), Local Intensity Scaling (LOCI), and Power Transformation (PT) against daily observations from seven gauges in the Welang Watershed (2001–2020). LS delivered the most consistent improvement (NSE = 0.87, R = 0.92, RSR = 0.36), reducing the residual error by 30% relative to the next-best method. LR, GA-CF, and LOCI enhanced seasonal patterns (NSE ≈ 0.85), while PT provided complementary gains for moderate events but remained sub-optimal for extremes. The refined IMERG series met the accuracy thresholds proposed for reservoir operations, providing a readily deployable rainfall input for data-scarce, topographically complex tropical watersheds.