Małgorzata Hosadyna-Kondracka

Dr. Małgorzata Hosadyna-Kondracka

Łukasiewicz Research Network - Krakow Institute of Technology
orcid

Research Focus & Metrics

Academic Career Length

8Years (2019-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 September 2019 in Archives of Foundry Engineering
Verified
Journal Article
Closed access
Katarzyna Aleksandra Major-GabryśKatarzyna Aleksandra Major-Gabryś
Katarzyna Aleksandra Major-Gabryś
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
Recently, some major changes have occurred in the structure of the European foundry industry, such as a rapid development in the production of castings from compacted graphite iron and light alloys at the expense of limiting the production of steel castings. This created a significant gap in the production of heavy steel castings (exceeding the weight of 30 Mg) for the metallurgical, cement and energy industries. The problem is proper moulding technology for such heavy castings, whose solidification and cooling time may take even several days, exposing the moulding material to a long-term thermal and mechanical load. Owing to their technological properties, sands with organic binders (synthetic resins) are the compositions used most often in industrial practice. Their main advantages include high strength, good collapsibility and knocking out properties, as well as easy mechanical reclamation. The main disadvantage of these sands is their harmful effect on the environment, manifesting itself at various stages of the casting process, especially during mould pouring. This is why new solutions are sought for sands based on organic binders to ensure their high technological properties but at the same time less harmfulness for the environment. This paper discusses the possibility of reducing the harmful effect of sands with furfuryl binders owing to the use of resins with reduced content of free furfuryl alcohol and hardeners with reduced sulphur content. The use of alkyd binder as an alternative to furfuryl binder has also been proposed and possible application of phenol-formaldehyde resins was considered.

11 March 2020 in Archives of Metallurgy and Materials
Verified
Journal Article
Closed access
PDF file
Katarzyna Aleksandra Major-GabryśKatarzyna Aleksandra Major-Gabryś
Katarzyna Aleksandra Major-Gabryś
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
SPS. Puzio
S. Puzio
JKJadwiga Kamińska
Jadwiga Kamińska
MAM. Angrecki
M. Angrecki
The ablation casting technology consists in pouring castings in single-use moulds made from the mixture of sand and watersoluble binder. After pouring the mould with liquid metal the mould is destructed (washed out) using a stream of cooling medium, which in this case is water. The process takes place while the casting is still solidifying. The following paper focuses on testing the influence of the modified ablation casting of aluminum alloy on casts properties produced in moulds with hydrated sodium silicate binder. The authors showed that the best kind of moulding sands for Al alloy casting will be those hardened with physical factors – through dehydration. The analysis of literature data and own research have shown that the moulding sand with hydrated sodium silicate hardened by dehydration is characterized by sufficient strength properties for the modified ablation casting of Al alloys. In the paper the use of microwave hardened moulding sands has been proposed. The moulds were prepared in the matrix specially designed for this technology. Two castings from the AlSi7Mg alloy were made; one by traditional gravity casting and the other by gravity casting using ablation. The conducted casts tests showed that the casting made in modified ablation casting technology characterizes by higher mechanical properties than the casting made in traditional casting technology. In both experimental castings the directional solidification was observed, however in casting made by ablation casting, dimensions of dendrites in the structure at appropriate levels were smaller.

30 December 2022 in Archives of Civil Engineering
Verified
Journal Article
Open access
PDF file
Katarzyna Aleksandra Major-GabryśKatarzyna Aleksandra Major-Gabryś
Katarzyna Aleksandra Major-Gabryś
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
MSMateusz Skrzyński
Mateusz Skrzyński
ISIwona Stachurek
Iwona Stachurek
The aim of this paper is to determine the influence of biomaterial in the binder composition on the quality of reclaim from furan no-bake sands. The biomaterial is introduced into the moulding sand in order to accelerate the biodegradation of post-regeneration dust and thus to reduce the amount of harmful waste from foundries in landfills. This addition, however, can’t deteriorate the technological properties of the moulding sand, including its ability to mechanical regeneration. Chemically bonded moulding sands are characterized by high ability to mechanical regeneration, which reduces the consumption of the raw material and costs related to their transport and storage. A side effect of the regeneration process is the formation of a large amount of post-regeneration dusts. According to the tendencies observed in recent years, moulding processes must meet high requirements connected to environmental protection including problems related to the disposal of generated wastes. A partial replacement of synthetic binding materials with biomaterials may be one of scientific research directions on the production of innovative foundry moulding and core sands. The conducted regeneration tests presented in this paper initially proved that biomaterial slightly decreases the quality of reclaim from moulding sand with its addition. However, its ability to regeneration increases with time of the process. In previous research authors tested biodegradability of the dust remaining after the regeneration process. The tests proved that moulding sand with biomaterial added at the stage of the production process is characterized by about three times better biodegradability than the same moulding sand without additive.

27 June 2022 in Polymers
Verified
Journal Article
Open access
PDF file
Katarzyna Aleksandra Major-GabryśKatarzyna Aleksandra Major-Gabryś
Katarzyna Aleksandra Major-Gabryś
ISIwona Stachurek
Iwona Stachurek
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
MHMarta Homa
Marta Homa
Resin-based binders are one of the main materials used in foundry molding and core sands. This work adds to the research on self-curing sands with furfuryl resin, which dominates in the production of large-size castings. The work concerns the possibility of using biodegradable polymers as a component of resin-based binders. Biodegradable or partially biodegradable polymers are a group of materials which have an increasing level of importance in many areas of life and technology. This is mainly due to the increase in waste deposited in landfills, water and soil. This problem also concerns waste from the casting production process with the use of disposable molds with resin-based binders, which are mainly residues from their mechanical regeneration process. The aim of the research presented in this paper was to determine the effect of polycaprolactone (PCL) on the structure of post-regeneration dust from molding sands before and after the biodegradation process carried out in a water environment. Structure studies were carried out by Fourier transform infrared spectroscopy (FTIR) and the changes in the mass by TG/DTA-QMS analysis. The article also presents the results of the research of the morphology carried out by scanning electron microscopy (SEM) and the chemical oxygen demand index (COD) in water extracts of dust samples.

18 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
Katarzyna Aleksandra Major-GabryśKatarzyna Aleksandra Major-Gabryś
Katarzyna Aleksandra Major-Gabryś
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
APAdelajda Polkowska
Adelajda Polkowska
MWMałgorzata Warmuzek
Małgorzata Warmuzek
In this work, the results of the examinations of the effect of the mold material and mold technology on the microstructure and properties of the casts parts of ductile cast iron have been presented. Four different self-hardening molding sands based on fresh silica sand from Grudzen Las, with organic binders (no-bake process), were used to prepare molds for tested castings. A novelty is the use of molding sand with a two-component binder: furfuryl resin-polycaprolactone PCL biomaterial. The molds were poured with ductile iron according to standard PN-EN 1563:2018-10. The microstructure of the experimental castings was examined on metallographic cross-sections with PN-EN ISO 945-1:2019-09 standard. Observations were made in the area at the casting/mold boundary and in a zone approximately 10 mm from the surface of the casting with a light microscope. The tensile test at room temperature was conducted according to standard PN-EN ISO 6892-1:2016-09. Circular cross-section test pieces, machined from samples taken from castings, were used. In the present experiment, it was stated that interactions between the mold material of different compositions and liquid cast iron at the stage of casting solidification led to some evolution of casting’s microstructure in the superficial layer, such as a pearlite rim observed for acidic mold sand, a ferritic rim for alkaline sand, and graphite spheroids degeneration, especially spectacular for the acidic mold with polycaprolactone (PCL) addition. These microstructural effects may point to the interference of the direct chemical interactions between liquid alloy and the components released from the mold sand, such as sulfur and oxygen. Particularly noteworthy is the observation that the use of molding sand with furfuryl resin with the addition of biodegradable PCL material does not lead to an unfavorable modification of the mechanical properties in the casting. The samples taken from Casting No. 2, made on the acidic molding sand with the participation of biodegradable material, had an average strength of 672 MPa, the highest average strength UTS-among all tested molding sands. However, the elongation after fracture was 48% lower compared to the reference samples from Casting No. 1 from the sand without the addition of PCL.

1 January 2022 in Archives of Foundry Engineering
Verified
Journal Article
Closed access
MHMałgorzata Hosadyna-Kondracka
Małgorzata Hosadyna-Kondracka
RNR. Nowak
R. Nowak
PTP. Turalska
P. Turalska
GBG. Bruzda
G. Bruzda
ŁBŁ. Boroń
Ł. Boroń
MWM. Wawrylak
M. Wawrylak