Overview of the zigzag microchannel for rigid inertial separation and enrichment (Z-RISE). The proposed device has superior performance for particle focusing and separation.
6 December 2023 in Case Studies in Thermal Engineering
Purpose: The purpose of this paper is to design, investigate and optimize a horizontal axis tidal turbine (HATT) using computer-aided numerical simulation and computational fluid dynamics (CFD). This is the first step of research and development (R&D) for implementation in the Persian Gulf condition. To do so, suitable locations are reviewed. Then, the optimization is focused on determining the optimum fixed pitch angle (β) of a three-bladed HATT based on the widespread multiple reference frame (MRF) technique to calculate power and thrust coefficients at different operational rotating speeds. Design/methodology/approach: To simplify the problem and reducing the computational costs due to cyclic symmetry only one blade, accordingly one-third of the whole computational domain is considered in the modeling. Due to flow’s nature involving rotating, separation and recirculation, a realizable κ-ε turbulence model with standard wall function is selected to capture flow characteristics influenced by the rotor and near the wall region. Simulations are conducted for two free-stream velocities, then compared with their dependencies through the dimensionless tip speed ratio (TSR) parameter. Findings: The validation process of the simulations is carried out by the use of AeroDyn BEM code, which has been evaluated by comparing with two experimental data. As results, the highest coefficient of power is achieved at ß = 19.3° at TSR = 4 with the value around 0.41 and 0.816 for thrust coefficient. Furthermore, to comprehend the rotor’s performance and simulation method, flow characteristics due to the rise in angular velocity is discussed in detail. Moreover, the major phenomenon, cavitation occurrence, is also checked at the critical situation where it is found to be safe. Originality/value: By comparing and evaluating the results to other HATTs, it implies that the proposed rotor of this study is feasible and proved by CFD evaluation at this step. However, the current rotor is awaiting a justification through experimental assessment.
Mixing at the microscale is of great importance for various applications ranging from biological and chemical synthesis to drug delivery. Among the numerous types of micromixers that have been developed, planar passive spiral micromixers have gained considerable interest due to their ease of fabrication and integration into complex miniaturized systems. However, less attention has been paid to non-planar spiral micromixers with various cross-sections and the effects of these cross-sections on the total performance of the micromixer. Here, mixing performance in a spiral micromixer with different channel cross-sections is evaluated experimentally and numerically in the Re range of 0.001 to 50. The accuracy of the 3D-finite element model was first verified at different flow rates by tracking the mixing index across the loops, which were directly proportional to the spiral radius and were hence also proportional to the Dean flow. It is shown that higher flow rates induce stronger vortices compared to lower flow rates; thus, fewer loops are required for efficient mixing. The numerical study revealed that a large-angle outward trapezoidal cross-section provides the highest mixing performance, reaching efficiencies of up to 95%. Moreover, the velocity/vorticity along the channel length was analyzed and discussed to evaluate channel mixing performance. A relatively low pressure drop (<130 kPa) makes these passive spiral micromixers ideal candidates for various lab-on-chip applications.