Qing Tao

Prof. Qing Tao

Xinjiang University
orcid

Research Focus & Metrics

Academic Career Length

14Years (2013-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 January 2025 in Sensors
Verified
Journal Article
Open access
PDF file
YHYonglin Han
Yonglin Han
QTQing Tao
Qing Tao
XZXiaodong Zhang
Xiaodong Zhang
The estimation of multijoint angles is of great significance in the fields of lower limb rehabilitation, motion control, and exoskeleton robotics. Accurate joint angle estimation helps assess joint function, assist in rehabilitation training, and optimize robotic control strategies. However, estimating multijoint angles in different movement patterns, such as walking, obstacle crossing, squatting, and knee flexion–extension, using surface electromyography (sEMG) signals remains a challenge. In this study, a model is proposed for the continuous motion estimation of multijoint angles in the lower limb (CB-TCN: temporal convolutional network + convolutional block attention module + temporal convolutional network). The model integrates temporal convolutional networks (TCNs) with convolutional block attention modules (CBAMs) to enhance feature extraction and improve prediction accuracy. The model effectively captures temporal features in lower limb movements, while enhancing attention to key features through the attention mechanism of CBAM. To enhance the model’s generalization ability, this study adopts a sliding window data augmentation method to expand the training samples and improve the model’s adaptability to different movement patterns. Through experimental validation on 8 subjects across four typical lower limb movements, walking, obstacle crossing, squatting, and knee flexion–extension, the results show that the CB-TCN model outperforms traditional models in terms of accuracy and robustness. Specifically, the model achieved R2 values of up to 0.9718, RMSE as low as 1.2648°, and NRMSE values as low as 0.05234 for knee angle prediction during walking. These findings indicate that the model combining TCN and CBAM has significant advantages in predicting lower limb joint angles. The proposed approach shows great promise for enhancing lower limb rehabilitation and motion analysis.

11 January 2025 in Scientific Reports
Verified
Journal Article
Open access
PDF file
WLWei Liu
Wei Liu
QTQing Tao
Qing Tao
NWNini Wang
Nini Wang
WXWendong Xiao
Wendong Xiao
CPCen Pan
Cen Pan
Real-time detection of conveyor belt tearing is of great significance to ensure mining in the coal industry. The longitudinal tear damage problem of conveyor belts has the characteristics of multi-scale, abundant small targets, and complex interference sources. Therefore, in order to improve the performance of small-size tear damage detection algorithms under complex interference, a visual detection method YOLO-STOD based on deep learning was proposed. Firstly, a multi-case conveyor belt tear dataset is developed for complex interference and small-size detection. Second, the detection method YOLO-STOD is designed, which utilizes the BotNet attention mechanism to extract multi-dimensional tearing features, enhancing the model’s feature extraction ability for small targets and enables the model to converge quickly under the conditions of few samples. Secondly, Shape_IOU is utilized to calculate the training loss, and the shape regression loss of the bounding box itself is considered to enhance the robustness of the model. The experimental results fully proved the effectiveness of the YOLO-STOD detection method, which constantly surpasses the competing methods and achieves 91.2%, 91.9%, and 190.966 detection accuracy and detection speed in terms of recall, Map value, and FPS, respectively, which is able to satisfy the needs of industrial real-time detection and is expected to be used in the real-time detection of conveyor belt tearing in the industrial field.

29 August 2023 in IEEE Access
Verified
Journal Article
Open access
JLJingxuan Liu
Jingxuan Liu
QTQing Tao
Qing Tao
BWBin Wu
Bin Wu
The timely and accurate recognition of dynamic muscle fatigued states in rehabilitation training helped in tailoring more scientifically effective training plans for patients. In this study, a CNN-LSTM-Transformer (CLT) model based on surface electromyographic signals (sEMG) was proposed to address the limited classification and low identification accuracy observed in existing muscle fatigued state recognition methods. This model combined the traditional convolutional neural network (CNN), long short-term memory network (LSTM), and Transformer encoder to achieve accurate classification of dynamic muscle fatigued. First, elbow flexion-extension fatigued experiments were conducted on 20 healthy participants, who were divided into four fatigued states based on the degree of fatigued. Subsequently, the acquired sEMG signal data was preprocessed and two nonlinear features, approximate entropy (ApEn) and permutation entropy (PE), were extracted as input features for machine learning. Finally, a CLT fatigued recognition model was constructed using the preprocessed sEMG signal data and compared with CNN, LSTM, and random forest (RF) models. The results showed that the CLT model had higher accuracy in recognizing muscle fatigued states compared to CNN, LSTM, and RF models, with a respective increase of 4.1%, 5.06%, and 8.39%. This model had good classification performance and could be used to monitor muscle fatigued during upper limb rehabilitation processes.

5 October 2022 in IEEE Access
Verified
Journal Article
Open access
WHWang Hai
Wang Hai
QTQing Tao
Qing Tao
SNSu Na
Su Na
ZXZhang Xiaodong
Zhang Xiaodong
Human beings have very dexterous hands which help us manipulate a lot of complicated tools. But most researches focus on gesture recognition. This situation leads to the phenomenon that our prosthetic hands lack continuous and natural movement. This paper proposes a method aimed to decode finger movements continuously and simultaneously based on multi-channel surface electromyography signals. This algorithm is useful for surface electromyography(sEMG) decoding controlled for a prosthetic hand, exoskeleton robots for upper-limb rehabilitation, and remote mechanical hand control. Firstly, the feature extractor based on a sliding time window is used to extract 8 kinds of sEMG features (mean absolute value, integral sEMG value, root mean square, waveform length, logarithmic feature, zero-crossing points, and slope symbol change) from the sEMG signals of 8 channels of the forearm. The estimated angle of the metacarpophalangeal joint with large fluctuation is optimized by inputting them to the deep forest regression model; Then, the artificial neural network is used to optimize this estimated angle, to create a comprehensive regression model combining the deep forest regression model and artificial neural network; Finally, the comprehensive regression model is used to continuously and accurately decode the collected surface EMG signal to obtain the prosthetic hand finger joint angle control values, and the other finger joint angles can be obtained through proportional control principle. The experimental results show that the average trajectory tracking accuracy of the proposed method is 42% higher than that of the traditional Gaussian process method, reaching 84.4%, which proves that the proposed method has a very good effect on finger joint angle estimation based on sEMG signal.

4 November 2024 in Sensors
Verified
Journal Article
Open access
PDF file
ZZZhiwei Zhou
Zhiwei Zhou
QTQing Tao
Qing Tao
NSNa Su
Na Su
JLJingxuan Liu
Jingxuan Liu
QCQingzheng Chen
Qingzheng Chen
BLBowen Li
Bowen Li
To enhance the classification accuracy of lower limb movements, a fusion recognition model integrating a surface electromyography (sEMG)-based convolutional neural network, transformer encoder, and long short-term memory network (CNN-Transformer-LSTM, CNN-TL) was proposed in this study. By combining these advanced techniques, significant improvements in movement classification were achieved. Firstly, sEMG data were collected from 20 subjects as they performed four distinct gait movements: walking upstairs, walking downstairs, walking on a level surface, and squatting. Subsequently, the gathered sEMG data underwent preprocessing, with features extracted from both the time domain and frequency domain. These features were then used as inputs for the machine learning recognition model. Finally, based on the preprocessed sEMG data, the CNN-TL lower limb action recognition model was constructed. The performance of CNN-TL was then compared with that of the CNN, LSTM, and SVM models. The results demonstrated that the accuracy of the CNN-TL model in lower limb action recognition was 3.76%, 5.92%, and 14.92% higher than that of the CNN-LSTM, CNN, and SVM models, respectively, thereby proving its superior classification performance. An effective scheme for improving lower limb motor function in rehabilitation and assistance devices was thus provided.

26 September 2016 in Chinese Journal of Mechanical Engineering
Verified
Journal Article
Closed access
PDF file
QTQing Tao
Qing Tao
JKJinsheng Kang
Jinsheng Kang
WSWenlei Sun
Wenlei Sun
ZLZhaobo Li
Zhaobo Li
XHXiao Huo
Xiao Huo