An electrochemical‐assisted leaching process using boron‐doped diamond (BDD) electrodes was developed to recover valuable metals from photovoltaic modules. With BDD electrodes peroxydisulfate is generated from sulfuric acid to oxidatively dissolve copper, tin and silver from solar cell contacts. Since the oxidant is regenerated in the developed process, no additional hazardous and volatile chemicals are required, and the process can be operated solely by electricity. In addition, the dissolved metals can be electrochemically recovered at the cathode of the same cell.
Membranes play a crucial role in efficiency and longevity of flow batteries. Vanadium flow batteries suffer self-discharge and capacity fading due to crossover of electrolyte components through the membrane from one battery half-cell to the other. We consider the impact of vanadium species crossing ion exchange membranes on state of charge of the battery and we present a simple method to determine crossoverll open circuit potential measurements. State of s. State of charge for the negative and positive half-cell is simulated based on assumptions and simplifications for cation and anion exchange membranes and different crossover parameters. We introduce a crossover index “Ind” which enables the determination of crossover direction from state of charge data for the negative and positive half-cell and therewith identification of the half-cell in which predominant self-discharge occurs. Furthermore Ind allows statements on crossover amount in dependence on state of operation. Simulated case studies are compared to experimental state of charge values estimated from half-cell potential measurements. Our results reveal that half-cell potential monitoring respectively half-cell SOC estimation, is a simple and suitable tool for the identification of crossover direction and relative amount of crossover in VFB.
Ferrate (Fe(VI)) is of great interest in energy storage solutions, organic synthesis, and wastewater treatment due to its decent oxidation potential and non‐toxic end‐product formation, making it a green oxidizer. The electrochemical generation of ferrate in NaOH at current densities of j ≥ 100 mA cm −2 is presented using low‐cost sacrificial iron anodes, mild steel, and spheroidal graphite cast iron (ductile iron). Under optimized reaction parameters with 40 wt.% (14 m ) NaOH and a ZrO 2 ‐based diaphragm, spheroidal graphite cast iron shows no signs of passivation in 5 h experiments even at j = 150 mA cm −2 . The results are used in a novel electrolysis cell with a combined geometric anode surface area of 230 cm 2 , incorporated in a mini‐plant suitable for continuous synthesis. This setup produces a peak ferrate concentration of 10.1 g L −1 (84 m m ) after 5 h in 1.6 L anolyte volume, resulting in a total ferrate mass of 16.2 g. Optimal electrolysis temperatures are between 35 and 50 °C. The highest current efficiency is 63.0%, and the lowest specific energy consumption is 9.2 kWh kg −1 ferrate. The presented work is an essential step toward the continuous electrochemical synthesis of ferrate using sacrificial anodes under basic conditions.
31 May 2023 in Journal of Electrochemical Science and Engineering
For an efficient flow battery operation, knowledge of the state of charge of the battery is essential. Monitoring the state of charge of both half cells is advantageous concerning a timely detection of crossover processes. We present the first results for amperometric and electrochemical quartz crystal microbalance measurements in a vanadium flow battery test setup. By validating with half cell potential measurements as well as ex situ titration we investigate the applicability of both electrochemical methods for an in situ half cell state of charge monitoring.