In this study, copper oxide (CuO) specimens were successfully prepared by the hydrothermal process at altered calcination temperatures; 350, 450, and 550°C. The synthesized samples were analyzed through X-ray powder diffraction (XRD), scanning electron microscope (SEM), Raman, Fourier-transform infrared spectroscopy (FTIR), and UV-Vis spectroscopy to analyze the impact of calcination temperature on the structural, morphological, vibration spectra, functional group, and optical properties of CuO for optoelectronic device applications. XRD confirms the pure single-phase monoclinic structure of synthesized samples with no impurity phases and has good crystallinity with the development in calcination temperature. The average crystalline size, lattice constant, and porosity were found in the range of 3.98–5.06 nm; a = 3.4357 Å, b = 3.9902 Å, c = 4.8977 Å – a = 3.0573 Å, b = 3.9573 Å, c = 4.6892 Å; and 3.37–1.03%, respectively. SEM exhibited a variation in morphology by increasing calcination temperature. Raman spectra revealed that the CuO sample calcinated at 550°C with a stone-like shape having a large grain size of 3.25 μm exhibited that Raman peak intensity and the multiphonon band became stronger and sharper and exhibited higher intensity compared to the samples calcinated at 350 and 450°C. FTIR spectra confirmed that these synthesized specimens exhibited the peaks associated with the typical stretching vibrations of the Cu–O bond between 400 and 500 cm −1 exhibiting the formation of CuO. The energy bandgap was slightly reduced from 1.61 to 1.43 eV with the increase in the calcination temperature. The optical studies revealed that the calcination temperature of 550°C improves the optical properties of CuO by tuning its optical bandgap. The modified structural, morphological, and optical characteristics of the prepared CuO samples make them an appropriate candidate for optoelectronic device applications.
6 June 2022 in Journal of Materials Research and Technology
The current research examines the impact of Ca2+ substitution on the phase and electrical properties of (Ba1−xCax)Ti4O9, (x = 0.0, 0.3, 0.6, and 0.9) sintered pellets synthesized by solid-state reaction method. The as-synthesized samples were analyzed using X-ray diffraction (XRD) and impedance spectroscopy. The emergence of orthorhombic phase fit into space group Pnmm was revealed by XRD, and the addition of Ca resulted in a considerable shift in grain size. Dielectric properties were determined using an impedance spectroscopy in a wide frequency range from 1MHz to 3 GHz. The dielectric properties i.e., dielectric constant (εr) and dielectric loss (), were measured at 3 GHz frequency. The frequency-dependent parameters such as conductivity, dielectric constant, and dielectric loss indicated that the relaxation process is a Maxwell–Wagner type of interfacial polarization. The improved dielectric properties and low energy loss have made (Ba1−xCax)Ti4O9 a prominent energy storage material. This study provides the possibility to improve its dielectric properties and reduce energy loss, making it an excellent energy storage material.
About Me
The focus of my research is nanomaterials. Started with nanomaterials characterizations for optoelectronics and solar cell applications, and now my research venture has embark to 2D materials.
The focus of my research is nanomaterials. Started with nanomaterials characterizations for optoelectronics and solar cell applications, and now my research venture has embark to 2D materials.