Amisha Parekh

Dr. Amisha Parekh

orcid

Research Focus & Metrics

Academic Career Length

3Years (2024-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
18 December 2024 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Amisha ParekhAmisha Parekh
Amisha Parekh
MMMaggie Moore
Maggie Moore
Amol V. JanorkarAmol V. Janorkar
Amol V. Janorkar
Roach MichaelRoach Michael
Roach Michael
The rising demand for dental and orthopedic implants and their frequent aseptic loosening failure mode necessitate the drive to continue modifying implant surfaces to improve osseointegration outcomes. Plasma-sprayed hydroxyapatite coatings are widely used but are prone to delamination. This study involves a single-step anodization process utilizing a novel electrolyte to produce Mg-doped carbonated hydroxyapatite and tricalcium phosphate-containing coatings on four titanium alloy surfaces. XRD confirmed hydroxyapatite and tricalcium phosphate formation, with FTIR examination revealing carbonate substitutions indicative of bone-like apatite formation in each oxide. SEM analyses revealed micro- and nano-scaled surface features on each oxide. SEM and EDS analyses of the oxide coating cross-sections showed each group to be bi-layered with an inner titanium dioxide-rich layer and an outer hydroxyapatite/tricalcium phosphate-rich layer. The oxide layer adhesion quality was shown to be good on CPTi, TAV, and TiMo α + β implant alloy surfaces. Unfortunately, the anodization process also resulted in an undesirable and embrittling omega phase at the substrate–oxide interface due to the migration of molybdenum into the inner oxide. Nonetheless, the anodized coatings on the CPTi and TAV alloy substrates, which are the most widely used titanium alloys for implant applications, show much potential for improving future patient outcomes.

5 October 2024 in Bioengineering
Verified
Journal Article
Open access
PDF file
RJRohan Jagtap
Rohan Jagtap
SYSamata Yalamanchil
Samata Yalamanchil
Amisha ParekhAmisha Parekh
Amisha Parekh
PTPedro Tretto
Pedro Tretto
Roach MichaelRoach Michael
Roach Michael
MSMini Suri
Mini Suri
Periapical radiographs are routinely used in dental practice for diagnosis and treatment planning purposes. However, they often suffer from artifacts, distortions, and superimpositions, which can lead to potential misinterpretations. Thus, an automated detection system is required to overcome these challenges. Artificial intelligence (AI) has been revolutionizing various fields, including medicine and dentistry, by facilitating the development of intelligent systems that can aid in performing complex tasks such as diagnosis and treatment planning. The purpose of the present study was to verify the diagnostic performance of an AI system for the automatic detection of teeth, caries, implants, restorations, and fixed prosthesis on periapical radiographs. A dataset comprising 1000 periapical radiographs collected from 500 adult patients was analyzed by an AI system and compared with annotations provided by two oral and maxillofacial radiologists. A strong correlation (R > 0.5) was observed between AI perception and observers 1 and 2 in carious teeth (0.7–0.73), implants (0.97–0.98), restored teeth (0.85–0.89), teeth with fixed prosthesis (0.92–0.94), and missing teeth (0.82–0.85). The automatic detection by the AI system was comparable to the oral radiologists and may be useful for automatic identification in periapical radiographs.

5 March 2025 in Materials
Verified
Journal Article
Open access
PDF file
Amisha ParekhAmisha Parekh
Amisha Parekh
ATAlp Tahincioglu
Alp Tahincioglu
EWEthan Chance Walters
Ethan Chance Walters
CCCharles Mitchell Chisolm
Charles Mitchell Chisolm
RWRandall Scott Williamson
Randall Scott Williamson
Roach MichaelRoach Michael
Roach Michael
The increasing demand for titanium implants necessitates improved longevity. Plasma-sprayed hydroxyapatite coatings enhance implant osseointegration but are susceptible to delamination. Alternatively, anodized hydroxyapatite coatings have shown greater adhesion strengths. The present study aimed to develop anodized hydroxyapatite coatings on titanium using commercial calcium-fortified fruit juice as a calcium source. Varying the electrolyte compositions enabled the formation of four oxide groups with different predominate calcium compounds. Each oxide’s morphology, crystallinity, chemistry, molecular structure, and adhesion quality were compared and contrasted. Nanoscale SEM images revealed a progression from porous surface oxide to white surface deposits to petal-like hydroxyapatite structures with the changing anodization electrolytes. Oxide thickness evaluations showed progression from a single-layered oxide with low Ca-, P-, and Mg-dopant incorporations to bi-layered oxide structures with increased Ca-, P-, and Mg-dopant incorporation with changing electrolytes. The bi-layered oxide structures exhibited a titanium-dioxide-rich inner layer and calcium-compound-rich outer layers. Furthermore, indentation analyses confirmed good adhesion quality for three oxides. For the predominate hydroxyapatite oxides, FTIR analyses showed carbonate substitutions indicating the presence of bone-like apatite formation, and ICP-OES analyses revealed prolonged Ca and Mg release over 30 days. These Mg-enhanced carbonated apatite coatings show much promise to improve osseointegration and future implant lifetimes.

21 May 2025 in Oxygen
Verified
Journal Article
Open access
PDF file
Amisha ParekhAmisha Parekh
Amisha Parekh
PKParker Knotts
Parker Knotts
Amol V. JanorkarAmol V. Janorkar
Amol V. Janorkar
Roach MichaelRoach Michael
Roach Michael
With humans living longer and the median age of the population increasing, there is an ever-increasing demand for better biomedical implants. Titanium implants have a long history of successful use, but their naturally forming amorphous oxide surfaces are not ideal to promote bone growth. Therefore, titanium surfaces are often modified to improve bioactivity through electrochemical processes such as anodization which can crystallize the oxide into more bioactive titanium oxide phases, form hierarchical micro- and nano-scale roughness profiles, and incorporate beneficial bone chemistry into the oxide layer to improve interactions with bone cells. We have recently developed three innovative anodization electrolytes based on combinations of citrus fruit juices and commercially available calcium compounds. Anodization in these electrolytes produced citrus-based oxides exhibiting surface Ca/P ratios within the range of human bone, unique cauliflower-like hierarchical micro- and nano-scale surface roughness profiles, and the formation of titanate compounds which have been shown to be precursors for subsequent apatite formation. Thus, our titanate-containing citrus-based oxides show much promise for improving future osseointegration.

31 July 2025 in Applied Sciences
Verified
Journal Article
Open access
PDF file
Amisha ParekhAmisha Parekh
Amisha Parekh
Amol V. JanorkarAmol V. Janorkar
Amol V. Janorkar
Roach MichaelRoach Michael
Roach Michael
Enhancing osseointegration is a common goal for many titanium implant coatings, since the naturally forming oxides are often bioinert and exhibit less than ideal bone-to-implant contact. Oxide coating surface topographies, chemistries, and crystallinities are known to play key roles in enhancing bone–implant interactions. In the present study, two novel anodization processes were developed in electrolytes based on juiced navel oranges to create bioactive oxide coatings on commercially pure titanium (CPTi) surfaces. Both oxide groups revealed multi-scaled micro and nano surface topographies, significant Ca and P-dopant incorporation exhibiting Ca/P ratios similar to human bone (1.7 and 1.8), and physiologically relevant Mg uptake levels of <0.1% and 1.4 at%. XRD and FTIR analyses of each oxide revealed a combination of tricalcium phosphate and hydroxyapatite phases that showed carbonate substitutions indicative of bone-like apatite formation. Finally, VDI indentation testing revealed good adhesion strengths, minimal cracking, and no visible delamination for both oxides. In summary, the anodization processes in the present study were shown to produce carbonated tricalcium phosphate and apatite containing oxides with contrasting levels of Mg uptake that show much promise to improve future implant clinical outcomes.

7 November 2024 in Oxygen
Verified
Journal Article
Open access
PDF file
CBCatherine Bruni
Catherine Bruni
HJHaden A. Johnson
Haden A. Johnson
AAAya Ali
Aya Ali
Amisha ParekhAmisha Parekh
Amisha Parekh
MMMary Marquart
Mary Marquart
Roach MichaelRoach Michael
Roach Michael
Bacteria-related infections remain a leading cause of dental implant failures. Despite the successful history of titanium implants, naturally forming oxides lack antibacterial properties. Crystalline oxides, modified through anodization processes, have shown photocatalytic-induced antibacterial properties when exposed to sufficient energy sources such as UVA light. Chemically doping these oxides with some metallic and non-metallic elements has been shown to enhance their photocatalytic activity (PCA). The present study’s objectives were to assess the relative UVA and violet-light-irradiated PCA levels, bacterial attachment levels, and pre-osteoblast early cell viability levels of phosphorus-doped and phosphorus-and-silver-doped anatase-phase oxides. Each oxide revealed similar surface topographies and surface porosity levels. However, the phosphorus-and-silver-doped oxides exhibited significantly higher PCA levels compared to the phosphorus-doped oxide counterpart after irradiation with 365 nm UVA (p < 0.0001) or 410 nm violet (p = 0.007 and 0.03) light. The phosphorus-doped oxides and phosphorus-and-silver-doped oxides revealed similar Staphylococcus aureus attachment levels after 60 min of UVA irradiation. The phosphorus-and-silver-doped oxides exhibited significantly increased 7-day cell viability compared to their phosphorus-doped oxide counterparts. Thus, it was concluded that the silver doping additions to the oxides show much promise for biomaterials applications and warrant further exploration.