Jeonghee Yun

Prof. Dr. Jeonghee Yun

orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 January 2025 in Processes
Verified
Journal Article
Open access
PDF file
YLYun-Yeong Lee
Yun-Yeong Lee
KCKyung-Suk Cho
Kyung-Suk Cho
JYJeonghee Yun
Jeonghee Yun
Soils co-contaminated with petroleum hydrocarbons (PHs) and heavy metals pose significant challenges, such as reduced bioavailability of pollutants, toxic effects on soil microorganisms, and unpredictable chemical interactions. These complex interactions hinder effective remediation. Phytoremediation, which utilizes plant and microbial processes, offers a sustainable and eco-friendly approach. However, its effectiveness is often constrained by the intricate interplay among PHs, heavy metals, and soil components, which complicates pollutant degradation and microbial activity. This review explores the interactions between enhancement strategies, including soil amendments, plant growth-promoting bacteria (PGPB), and genetic engineering, which can synergistically enhance pollutant degradation and remediation efficiency. Key challenges include competition for soil adsorption sites among contaminants, microbial community disruptions, and environmental variability. Moreover, the limitations of these strategies, including their reliance on specific plant species, sensitivity to environmental variability, and the necessity for long-term monitoring, are discussed. The proposed solutions focus on integrating emerging technologies and interdisciplinary approaches to overcome these challenges and improve pollutant removal efficiency. Future advancements in interdisciplinary approaches, integrating biological techniques with technological innovations, are highlighted as key to addressing the complexities of co-contaminated environments and improving pollutant removal efficiency.

1 February 2024 in BioResources
Verified
Journal Article
Closed access
SMSeongwoo Myeong
Seongwoo Myeong
JYJeonghee Yun
Jeonghee Yun
Biochar (BC) was used in Trichoderma sp. culture to produce high-activity cellulase on a laboratory scale. The biochar was added into the flask before being applied to the fermenter to identify the enhancement effect and to determine the best amount of addition and the most suitable incubation period. Cellulase production was performed with a working volume of 4 L, and enzymatic hydrolysis was conducted to evaluate the saccharification ability of the enzyme. During incubation, the activities of three enzymes (Endoglucanase (EG), β-glucosidase (BGL), and cellobiohydrolase (CBH)) were measured for three days, and the cellulase activity was determined using a filter paper unit (FPU). In flask scale, EG, BGL, and CBH activities were increased by 1.4, 2.1, and 1.8 folds, respectively, and the incubation period was shortened by adding BC. In the fermenter scale, EG, BGL, and CBH activities were noticeably enhanced by 12.1, 5.8, and 7.2 folds, respectively, and FPU was 42.1 (9.8 folds). Additionally, the conversion rates of cellulose and steam exploded softwood and hardwood were 109.4%, 75.4%, and 87.3%, which were similar to a commercial enzyme (Cellic CTecⅡ). This study demonstrated that biochar could be used to produce high-activity cellulase in a shorter period and suggests a novel method for effective cellulase production.

Verified
Journal Article
Open access
PDF file
SMSeongwoo Myeong
Seongwoo Myeong
YLYun-Yeong Lee
Yun-Yeong Lee
JYJeonghee Yun
Jeonghee Yun
This study optimized operating parameters to enhance cellulase production and evaluated scale-up feasibility in submerged fermentation (SmF) using Trichoderma sp. KMF006. Flask-scale experiments assessed the effects of Avicel:cellulose ratios (4:0–0:4), agitation speeds (150–210 rpm), and turbulence (baffled vs. non-baffled flasks), with optimized conditions applied to a 10 L bioreactor. A 3:1 Avicel:cellulose ratio (A3C1) significantly accelerated cellulase production, reaching peak activity 6 days earlier than Avicel alone. An agitation speed of 180 rpm was optimal, balancing enzyme activity and energy efficiency. Turbulence enhanced cellulase yields, with baffled flasks increasing EG, BGL, and CBH activities 19.9-, 6.2-, and 8.9-fold, respectively, compared to the control. Biochar further improved cellulase production but only under turbulent conditions, demonstrating a synergistic effect. At the bioreactor scale, the A3-180_Imp (A3C1, 180 rpm, impeller-induced turbulence) achieved the highest enzymatic activity (33.60 U/mL EG, 3.46 U/mL BGL, and 0.63 U/mL CBH). The filter paper unit (FPU) was 84 FPU/mL, a two-fold increase compared to the control. However, excessive turbulence at 210 rpm reduced enzyme stability, emphasizing the importance of balancing shear stress. These findings provide a systematic framework for optimizing SmF conditions, highlighting the significance of balancing hydrodynamic conditions for efficient cellulase production at an industrial scale.

4 May 2022 in Wood Material Science & Engineering
Verified
Journal Article
Closed access
Muhammad Adly Rahandi LubisMuhammad Adly Rahandi Lubis
Muhammad Adly Rahandi Lubis
BPByung-Dae Park
Byung-Dae Park
YKYeong-Suk Kim
Yeong-Suk Kim
JYJeonghee Yun
Jeonghee Yun
HSHee Chang Shin
Hee Chang Shin
This study aims to visually inspect the effects of oxidized starch (OS) adhesives prepared with two cross-linkers namely citric acid (CA) and blocked-polymeric MDI (B-pMDI) on the extent of surface-inhabiting molds growth on the surface of medium-density fiberboard (MDF). Five surface-inhabiting molds namely Aspergillus niger (ASN), Penicillium funiculosum (PEC), Rhizopus oryzae (RHO), Aureobasidium pullulans (AUP), and Trichoderma virens (TRV) were inoculated onto MDF samples for four weeks at 26 ± 2°C and 70–80% relative humidity to enable them grow on the surface. The extent of mycelium growth on the MDF surface was assessed by visual inspection after incubation at four time intervals. The results showed that MDF samples bonded with OS adhesives were more susceptible to the surface-inhabiting molds than the control MDF samples bonded with urea-formaldehyde (UF) resins. The resistance of mold growth on MDF-OS/CA was comparable to MDF-control, particularly against AUP, which was around 0.7 after four weeks, indicating less mold growth on the surface of MDF. The susceptibility of MDF samples to mold increased in the order of MDF-control, MDF-OS/CA, and MDF-OS/B-pMDI.

30 June 2025 in Polymers
Verified
Journal Article
Open access
PDF file
GLGaeun Lim
Gaeun Lim
SOSuk-Jin Oh
Suk-Jin Oh
YHYebin Han
Yebin Han
JYJeonghee Yun
Jeonghee Yun
Jeong Chan JooJeong Chan Joo
Jeong Chan Joo
YYYung-Hun Yang
Yung-Hun Yang
Poly(3-hydroxybutyrate-co-3-hydroxyhexanoate) (P(3HB-co-3HHx)) is a representative PHA copolymer that can improve the mechanical limitations of polyhydroxybutyrate (P(3HB)). Although genetic engineering can facilitate 3HHx incorporation, it often compromises cell growth and reduces polymer molecular weight owing to metabolic disruptions caused by the deletion of acetoacetyl coenzyme A (acetyl-CoA) reductase (PhaB). To address this issue, native strains capable of producing high levels of 3HHx were identified via oil-based Cupriavidus screening. Eight PHA-producing strains were isolated from various samples and Cupriavidus sp. Oh_1 exhibited the highest polyhydroxybutyrate (PHB) production at 15.23 g/L from 17.2 g/L of biomass using soybean oil. Moreover, Oh_1/phaCRaJPa, containing enoyl-CoA hydratase (phaJ) and PHA synthetase (phaC), was identified as the most effective novel strain producing the highest 3HHx mole fraction, 48.93 g/L of PHA from 52.3 g/L of biomass and achieving a maximum 3HHx accumulation of 27.2 mol%. The resulting P(3HB-co-3HHx) showed a higher Mw (12.3 × 105) compared with P(3HB-co-3HHx) produced by the phaB-deleted strain (14.6 × 104). Higher production of 3HHx was attributed to the higher expression of phaCRa and phaJPa in Oh_1, with log2 fold changes of 2.94 and 8.2, respectively, as well as the upregulation of certain β-oxidation encoding operons. Collectively, these findings highlight a strain capable of synthesizing a substantial 3HHx fraction without requiring gene deletions or extensive genetic modifications.

9 June 2025 in Journal of Fungi
Verified
Journal Article
Open access
PDF file
SKSeungjun Kim
Seungjun Kim
IHIksu Ha
Iksu Ha
YLYun-Yeong Lee
Yun-Yeong Lee
JLJunseo Lee
Junseo Lee
JYJeonghee Yun
Jeonghee Yun
Ultraviolet (UV)-induced mutagenesis is a cost-effective and straightforward technique for introducing random genetic variations without the use of chemical reagents or genetic engineering. It is commonly employed to enhance enzyme activity in industrial trains. In this study, Trichoderma sp. was exposed to UV radiation at varying distances (4, 9, and 13 cm) and durations (2, 4, 6, and 8 min) to induce mutations. The activities of endoglucanase (EG), β-glucosidase (BGL), and cellobiohydrolase (CBH) were assessed following treatment. The 4 cm exposure distance yielded the highest enhancement, with EG, BGL, and CBH activities increasing 1.5-, 1.3-, and 0.9-fold, respectively. When the distance was fixed at 4 cm, the optimal exposure time was identified as 4 min, yielding further enhancements of 1.9-, 1.6-, and 1.4-fold, respectively. The resulting mutant, designated Mut-4, was scaled up in a 10-L bioreactor to assess its industrial applicability. Mut-4 retained its enhanced performance, achieving 1.9-, 2.0-, and 1.4-fold enhancements in EG, BGL, and CBH activities, respectively, compared with the original strain. These findings indicate that combining UV-induced mutagenesis with basic screening is an effective strategy for enhancing cellulolytic enzyme production, representing a promising approach for lignocellulosic biomass conversion.