Jaromir Riha

Prof. Dr. Jaromir Riha

Brno University of Technology, Faculty of Civil Engineering
orcid

Research Focus & Metrics

Academic Career Length

17Years (2010-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 October 2020 in Sensors
Verified
Journal Article
Open access
PDF file
YGYaser Ghafoori
Yaser Ghafoori
AVAndrej Vidmar
Andrej Vidmar
Jaromir RihaJaromir Riha
Jaromir Riha
AKAndrej Kryžanowski
Andrej Kryžanowski
Seepage flow through embankment dams and their sub-base is a crucial safety concern that can initiate internal erosion of the structure. The thermometric method of seepage monitoring employs the study of heat transfer characteristics in the soils, as the temperature distribution in earth-filled structures can be influenced by the presence of seepage. Thus, continuous temperature measurements can allow detection of seepage flows. With the recent advances in optical fiber temperature sensor technology, accurate and fast temperature measurements, with relatively high spatial resolution, have been made possible using optical fiber distributed temperature sensors (DTSs). As with any sensor system, to obtain a precise temperature, the DTS measurements need to be calibrated. DTS systems automatically calibrate the measurements using an internal thermometer and reference section. Additionally, manual calibration techniques have been developed which are discussed in this paper. The temperature data do not provide any direct information about the seepage, and this requires further processing and analysis. Several methods have been developed to interpret the temperature data for the localization of the seepage and in some cases to estimate the seepage quantity. An efficient DTS application in seepage monitoring strongly depends on the following factors: installation approach, calibration technique, along with temperature data interpretation and post-processing. This paper reviews the different techniques for calibration of DTS measurements as well as the methods of interpretation of the temperature data.

3 July 2014 in Natural Hazards and Earth System Sciences
Verified
Journal Article
Open access
MBM. Brazdova
M. Brazdova
Jaromir RihaJaromir Riha
Jaromir Riha
In this paper a model for the estimation of the number of potential fatalities is proposed based on data from 19 past floods in central Europe. First, the factors contributing to human losses during river floods are listed and assigned to the main risk factors: hazard – exposure – vulnerability. The order of significance of individual factors has been compiled by pairwise comparison based on experience with real flood events. A comparison with factors used in existing models for the estimation of fatalities during floods shows good agreement with the significant factors identified in this study. The most significant factors affecting the number of human losses in floods have been aggregated into three groups and subjected to correlation analysis. A close-fitting regression dependence is proposed for the estimation of loss of life and calibrated using data from selected real floods in central Europe. The application of the proposed model for the estimation of fatalities due to river floods is shown via a flood risk assessment for the locality of Krnov in the Czech Republic.

24 September 2010 in Natural Hazards and Earth System Sciences
Verified
Journal Article
Open access
ADA. Dráb
A. Dráb
Jaromir RihaJaromir Riha
Jaromir Riha
Directive 2007/60/EC of the European Parliament and of the Council of 23 October 2007 on the assessment and management of flood risks (the Flood Risk Directive) signifies that flood risk analysis methods are gaining ground in EC Member States and, therefore, also in the Czech Republic (CR). Procedures of flood risk analysis have been developed in the Czech Republic since the catastrophic floods of 1997 in line with European and worldwide trends and have been tested and applied in hundreds of case studies to date. Currently, the Flood Risk Directive Guideline based on past experience with flood risk analysis applications is being processed. The aim of the paper is to present flood risk analysis procedures and specially developed techniques for the assembly of flood hazard, danger and flood risk maps. Methods related to flood risk management plans are briefly mentioned as well. The following particular problems are discussed in more detail: an application and extension of the "danger matrix" approach, the definition of residual danger, the formulation of efficiency criteria and preliminary multi-criteria flood risk assessment. These issues were tested in practical applications at pilot locations in the Czech Republic. Present experience provides evidence that the flood risk analysis methods used in the Czech Republic are in harmony with the requirements of the Flood Risk Directive. The proposed and applied methods are based primarily on existing available data such as flood extent maps, cadastral maps, the Register of Census Districts and Structures and others.

17 August 2020 in Water
Verified
Journal Article
Open access
PDF file
Jaromir RihaJaromir Riha
Jaromir Riha
SKStanislav Kotaška
Stanislav Kotaška
LPLubomír Petrula
Lubomír Petrula
Failures of small dams can pose a serious threat to people and property even if the size of the schemes is relatively low. In many cases, small dams are situated in a cascade along streams, meaning that the failure of the uppermost dam may cause the dams downstream to fail. In this paper, a cascade of three small reservoirs, Lichnov II (14.6 m high), Lichnov III (10 m high), and Pocheň (8.5 m high), is the subject of the dam break analyses carried out via various methods such as empirical formulae, analogy, and hydraulic modeling. The dam-break flood routing was simulated using a shallow water flow hydraulic model. The simulations confirm that the attenuation effect of the peak discharge is governed by the flood volume, slope, and morphology of the floodplain and increases with the distance from the breached dam following an approximately exponential trend. When estimating peak discharge, empirical formulae derived for a single dam break should be applied carefully as they may underestimate the peak outflow by up to 10% in the case of a dam cascade. The attenuation volume of small reservoirs is small when compared to the flood volume, meaning that the attenuation of the peak discharge usually varies between 5–10%.

29 January 2020 in Water
Verified
Journal Article
Open access
PDF file
YGYaser Ghafoori
Yaser Ghafoori
MMMatej Maček
Matej Maček
AVAndrej Vidmar
Andrej Vidmar
Jaromir RihaJaromir Riha
Jaromir Riha
AKAndrej Kryžanowski
Andrej Kryžanowski
Seepage is the key factor in the safety of dikes and earth-fill dams. It is crucial to identify and localize the seepage excesses at the early stages before it initiates the internal erosion process in the structure. A proper seepage monitoring system should ensure a continuous and wide area seepage measurement. Here, continuous monitoring of seepage at the laboratory-scale is achieved by a passive optical fiber Distributed Temperature Sensing (DTS) system. An experimental model was designed which consists of initially unsaturated sand model, water supply, seepage outflow, optical fiber DTS system, and water and air temperature measurement. Initially, the sand temperature was higher than the temperature of the seepage water. An optical fiber DTS system was employed with a high-temperature resolution, short sampling intervals and short time intervals for temperature monitoring in the sand model. In the system, the small variation in the temperature due to groundwater flow was detected. The numerical analysis was conducted for both the seepage process and the heat transfer progression in the sand model. The results of the heat flow simulation were evaluated and compared with the measured temperature by the optical fiber DTS. Obvious temperature reduction was obtained due to seepage propagation in the sand. The rate of temperature reduction was observed to be dependent on the seepage flow velocity.

14 August 2018 in Journal of Hydrology and Hydromechanics
Verified
Journal Article
Open access
PDF file
Jaromir RihaJaromir Riha
Jaromir Riha
LPLubomír Petrula
Lubomír Petrula
MHMario Hala
Mario Hala
ZAZakaraya Alhasan
Zakaraya Alhasan
Empirical formulae are often used in practice to quickly and cheaply determine the hydraulic conductivity of soil. Numerous relations based on dimensional analysis and experimental measurements have been published for the determination of hydraulic conductivity since the end of 19th century. In this paper, 20 available empirical formulae are listed, converted and re-arranged into SI units. Experimental research was carried out concerning hydraulic conductivity for three glass bead size (diameters 0.2 mm, 0.5 mm and 1.0 mm) and variable porosity. The series of experiments consisted of 177 separate tests conducted in order to obtain relevant statistical sets. The validity of various published porosity functions and empirical formulae was verified with the use of the experimental data obtained from the glass beads. The best fit was provided by the porosity function n3/(1-n)2. In the case of the estimation of the hydraulic conductivity of uniform glass beads, the best fit was exhibited by formulae published by Terzaghi, Kozeny, Carman, Zunker and Chapuis et al.