Qingyu Zhu

Dr. Qingyu Zhu


Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 April 2021 in IEEE Access
Verified
Journal Article
Open access
JLJunzhe Lin
Junzhe Lin
YZYulai Zhao
Yulai Zhao
QZQingyu Zhu
Qingyu Zhu
SHShuo Han
Shuo Han
Hui MaHui Ma
Hui Ma
QHQingkai Han
Qingkai Han
Long service time and excessive vibration of aero-engine will cause failure of clamps, which usually fix pipelines on the outside of an aero-engine. In this paper, the nonlinear vibration characteristics caused by loosening clamps in aero-engine pipeline are determined. According to the real parameters of an aero-engine clamp-pipeline test rig, the clamp is simplified into a nonlinear spring-damping. Thus, a clamp-pipeline nonlinear model based on cubic stiffness is established. The multi-scale method is used to obtain the analytical solution of the nonlinear model. Based on the real test data, the model parameters of the clamp-pipeline nonlinear system are identified, and then the nonlinear vibration characteristics of the system are obtained. Finally, using the vibration transmissibility method, the influence of the severity of clamp loosening on the nonlinear vibration characteristics of the system is obtained.

7 February 2023 in Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science
Verified
Journal Article
Closed access
SHShuo Han
Shuo Han
TYTongguang Yang
Tongguang Yang
QZQingyu Zhu
Qingyu Zhu
YZYulai Zhao
Yulai Zhao
QHQingkai Han
Qingkai Han
The rotor system design is gradually becoming lighter as the thrust-weight ratio of the new generation of aeroengines improves, making the power turbine rotor structure more slender and flexible, and it is difficult to judge the axial distribution of unbalance. Meanwhile, the engine rotor’s working speed is above the second critical speed and even exceeds the third-order speed. The small imbalance of the rotating shaft will cause large vibration, coupled with the influence of mode shape, resulting in difficulty in rotor dynamic balance, low efficiency and poor effect of the flexible rotor dynamic balance. Therefore, finding out the unbalance position is of great significance to determine the balance plane during rotor dynamic balance, and improve the balance efficiency and effect of flexible rotor. Firstly, the paper established the dynamic model of power turbine rotor, analyzed the vibration response law of rotor with unbalance at different positions, and found out the sensitive position of rotor unbalance. Then, a power turbine rotor unbalance position identification method, based on deep learning, one-dimensional convolution neural network (1D-CNN) is proposed. The multiple measured response data of the rotor with different unbalance positions are input into 1D-CNN for training. Finally, at subcritical speed, critical speed and supercritical speed, the accuracy of 1D-CNN method for rotor unbalance position identification is 99.5%, 99.5%, and 99.0% respectively, which verifies the effectiveness, feasibility of 1D-CNN method for rotor unbalance position identification, and provides a new solution for intelligent identification of aeroengine rotor unbalance position.

13 January 2023 in Aerospace
Verified
Journal Article
Open access
PDF file
QZQingyu Zhu
Qingyu Zhu
QHQingkai Han
Qingkai Han
JLJinguo Liu
Jinguo Liu
CYChangshuai Yu
Changshuai Yu
In this paper, a finite element model updating (FEMU) method is proposed based on the response surface model (RSM) and genetic algorithm (GA) to establish a high-precision finite element (FE) model of space station scientific experiment racks. First, the fine solid and mixed FE models are established, respectively, and a comparison of the modal test results is conducted. Then, an orthogonal experimental design is used to analyze the significance of the parameters, and the variables to be modified are determined. The design parameters are sampled via the Latin hyperbolic method and are substituted into the FE model to obtain the modal parameters of the scientific experiment rack. The mapping relationship between the design and modal parameters is fitted by constructing the Kriging function, and the RSM is established. The design parameters of the scientific experiment rack are optimized via GA, and the initial FE model is updated, which has the advantage of improving the computing efficiency. Finally, the updated FE model of the experiment rack is verified by frequency sweep and random vibration tests. The experimental results show that the proposed approach has high precision and computing efficiency, and compared with the test results, the modal frequency errors of the updated model are within 5%, and the vibration response errors under random excitation of the updated model are within 7%.

12 January 2022 in Applied Sciences
Verified
Journal Article
Open access
PDF file
QZQingyu Zhu
Qingyu Zhu
QHQingkai Han
Qingkai Han
XYXiao-Dong Yang
Xiao-Dong Yang
JLJunzhe Lin
Junzhe Lin
This paper presents the dynamic characteristics analysis of a rigid body system with spatial multi-point elastic supports, as well as the sensitivity analysis of support parameters. A rigid object is characterized by six degrees-of-freedom (DOFs) motions and considering the spatial location vector decomposition of elastic supports, a rigid body system dynamic model with spatial multi-point elastic supports is derived via the Lagrangian energy method. The system modal frequencies are calculated, and to be verified by finite element modal analysis results. Next, based on the above-mentioned model, system modal frequencies are obtained under different support locations, where the support stiffness components are different. Interpolate the stiffness components corresponding to each support location, calculate system modal frequencies, and the response surface model (RSM) for system modal frequencies is established. Further, based on the RSM modal analysis results, the allowable support location for the system modal insensitive area can be obtained. At last, a lubricating oil-tank system with four supports is taken as an example, and the effects of support spatial locations and stiffness components on the system inherent characteristics are discussed. This present work can provide a basis for the dynamic design of the spatial location and stiffness for this type of installation structures.

19 February 2020 in PLOS ONE
Verified
Journal Article
Open access
PDF file
LWLiping Wang
Liping Wang
QZQingyu Zhu
Qingyu Zhu
HZHongyang Zhao
Hongyang Zhao
The present investigation devices a novel X-type six-high (X-6h) mill. In addition, parametric models of different roll layouts such as the four-high (4-h), I-type six-high (I-6h), and X-6h mills are established. Three-dimensional (3D) finite element (FE) contact analysis for a strip rolling process is conducted when the mills are subjected to a constant vertical load of 65 kN. Through comparative analysis of von Mises stress, contact stress and elastic deformation displacement in three roll layouts, the rigidity characteristic of each is obtained, and it is found that the proposed X-6h mill has the largest roll gap stiffness. The influence of different roll diameter ratios on the roll gap stiffness of the roll system is investigated, based on which an optimization design model is built. Further, by taking into account the roll gap stiffness of the roll system as the optimization objective, the optimum diameter ratios of backup roll (BUR) to work roll (WR) of the X-6h rolling mill is achieved via the genetic algorithm (GA) optimization method, obtaining the optimum structural parameters of BUR and WR as well. The reliability of the proposed design is verified by manufacturing a prototype mill which produced magnesium alloy and aluminum alloy strips of high quality.

15 October 2021
Verified
Conference Paper
Closed access
TYTongguang Yang
Tongguang Yang
SHShuo Han
Shuo Han
QHQingkai Han
Qingkai Han
QZQingyu Zhu
Qingyu Zhu
XYXiaoguang Yu
Xiaoguang Yu
The characteristics of the fixed clamp in the hydraulic piping of aero-engine are not obvious, the accuracy of fault identification is low, the fault analysis methods based on human and expert knowledge is limited. In order to address the above problems, a method was proposed, based on which, the optimized VMD was combined with Deep Convolutional Neural Network to create an intelligent fault diagnosis method for VMD and DCNN clamps. Firstly, the signal was decomposed by the optimized VMD, and then DCNN was adopted for fault pattern identification, finally this method was applied in example. The results showed that this method not only could decompose the signal accurately and effectively, but also identify the clamp fault type with 98.2% accuracy.