httpwwwenvprocengeuenpeter-mizsey Mizsey

Prof. httpwwwenvprocengeuenpeter-mizsey Mizsey

University of Miskolc, Institute of Chemistry, Department of FInce chemicals and environmental technologies
+1

Research Focus & Metrics

Academic Career Length

23Years (2004-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 January 2019 in Green Chemistry
Verified
Journal Article
Closed access
PDF file
Mirco VolantiMirco Volanti
Mirco Volanti
Daniele CespiDaniele Cespi
Daniele Cespi
Fabrizio PassariniFabrizio Passarini
Fabrizio Passarini
ENE. Neri
E. Neri
FCFabrizio Cavani
Fabrizio Cavani
Daniel FozerDaniel Fozer
Daniel Fozer
The present work compares, from a life cycle perspective, four different ways for the production of terephthalic acid.

1 December 2020 in Applied Energy
Verified
Journal Article
Open access
DFDániel Fózer
Dániel Fózer
Mirco VolantiMirco Volanti
Mirco Volanti
Fabrizio PassariniFabrizio Passarini
Fabrizio Passarini
Petar Sabev VarbanovPetar Sabev Varbanov
Petar Sabev Varbanov
Jiří Jaromir KlemešJiří Jaromir Klemeš
Jiří Jaromir Klemeš
httpwwwenvprocengeuenpeter-mizsey Mizseyhttpwwwenvprocengeuenpeter-mizsey Mizsey
httpwwwenvprocengeuenpeter-mizsey Mizsey

22 September 2019 in Polymers
Verified
Journal Article
Open access
PDF file
WCWafaa Cheikh
Wafaa Cheikh
ZRZsófia Borbála Rózsa
Zsófia Borbála Rózsa
CLChristian Orlando Camacho López
Christian Orlando Camacho López
httpwwwenvprocengeuenpeter-mizsey Mizseyhttpwwwenvprocengeuenpeter-mizsey Mizsey
httpwwwenvprocengeuenpeter-mizsey Mizsey
BVBéla Viskolcz
Béla Viskolcz
ZFZsolt Fejes
Zsolt Fejes
A kinetic and mechanistic investigation of the alcoholysis of phenyl isocyanate using 1-propanol as the alcohol was undertaken. A molecular mechanism of urethane formation in both alcohol and isocyanate excess is explored using a combination of an accurate fourth generation Gaussian thermochemistry (G4MP2) with the Solvent Model Density (SMD) implicit solvent model. These mechanisms were analyzed from an energetic point of view. According to the newly proposed two-step mechanism for isocyanate excess, allophanate is an intermediate towards urethane formation via six-centered transition state (TS) with a reaction barrier of 62.6 kJ/mol in the THF model. In the next step, synchronous 1,3-H shift between the nitrogens of allophanate and the cleavage of the C–N bond resulted in the release of the isocyanate and the formation of a urethane bond via a low-lying TS with 49.0 kJ/mol energy relative to the reactants. Arrhenius activation energies of the stoichiometric, alcohol excess and the isocyanate excess reactions were experimentally determined by means of HPLC technique. The activation energies for both the alcohol (measured in our recent work) and the isocyanate excess reactions were lower compared to that of the stoichiometric ratio, in agreement with the theoretical calculations.

23 March 2019 in Clean Technologies and Environmental Policy
Verified
Journal Article
Open access
PDF file
EHEniko Haaz
Eniko Haaz
Daniel FozerDaniel Fozer
Daniel Fozer
TNTibor Nagy
Tibor Nagy
NVNora Valentinyi
Nora Valentinyi
AAAnita Andre
Anita Andre
Andras Jozsef TothAndras Jozsef Toth
Andras Jozsef Toth
The problem of process wastewater arises not only in fine chemical industry, but also where water is used for washing. In these cases, surfactant material is given to the water, so its washing capability is enhanced. The used water contains surfactant material and dirt. It has high chemical oxygen demand (COD) resulting in serious environmental problems. Finding a solution is inevitable because of the high wastewater fine which has to be paid by the factories if wastewater is emitted without any treatment. A suitable method had to be found that follows the principles of circular economy, so the industrial cycles can be closed like in nature and the water can be reused. Our designed method focuses on different kinds of wastewater containing special surfactant materials, and it has chemical industry relations. The treatment should have reduced the high COD value below to 1000 mgO2/L, which is the discharge limit. It was also aimed that instead of discharging, the treated water could be recycled and reused. Our new physicochemical treatment process consists of a vacuum evaporation method that reduces COD from c.a. 8400 to 1100 mgO2/L. Both laboratory and pilot experiments were investigated. Since this COD value was not satisfactory, a subsequent reverse osmosis membrane operation was also applied. This two-step method, vacuum evaporator followed by reverse osmosis, was able to reduce the COD in wastewater containing surfactant/washing material below the discharge limit. 100 mgO2/L could be reached with using TriSep™ X201 membrane. Penalty calculation and cost estimation also demonstrate the efficiency of our novel method.

14 November 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
HTHuyen Trang Do Thi
Huyen Trang Do Thi
httpwwwenvprocengeuenpeter-mizsey Mizseyhttpwwwenvprocengeuenpeter-mizsey Mizsey
httpwwwenvprocengeuenpeter-mizsey Mizsey
Andras Jozsef TothAndras Jozsef Toth
Andras Jozsef Toth
In the COVID-19 pandemic period, the role of face masks is critical as a protective physical barrier to prevent droplets and filtrate exhalations coming from infected subjects or against various environmental threats, including the SARS-Cov-2 virus. However, the plastic and microplastic waste from the used face masks pollute the environment, cause a negative impact on human health and the natural ecosystem, as well as increase landfill and medical waste. The presented paper focuses on providing an overview of the application of membrane technology in face mask products as well as the development of protection mechanisms in the future. The authors performed an environmental analysis of reusable (cloth) masks and disposable masks (surgical masks and filtering facepiece respirators) using the Life Cycle Assessment methodology to assess the impacts on the environment, human health, and ecosystem. IMPACT 2002+ V2.14, ReCiPe 2016 Endpoint (H) V1.02, IPCC 2013 GWP 100a V1.03 methods were applied using specialized software (SimaPro V9.1). The disposable masks consistently provide higher protection, though they also carry several multiple environmental burdens. Conversely, reusable masks improve environmental performance, reduce 85% of waste, have a 3.39 times lower impact on climate change, and are 3.7 times cheaper than disposable masks.

16 November 2020 in Membranes
Verified
Journal Article
Open access
PDF file
HTHuyen Trang Do Thi
Huyen Trang Do Thi
httpwwwenvprocengeuenpeter-mizsey Mizseyhttpwwwenvprocengeuenpeter-mizsey Mizsey
httpwwwenvprocengeuenpeter-mizsey Mizsey
Andras Jozsef TothAndras Jozsef Toth
Andras Jozsef Toth
It can be stated that in the fine chemical industries, especially in the pharmaceutical industry, large amounts of liquid waste and industrial waste solvents are generated during the production technology. Addressing these is a key issue because their disposal often accounts for the largest proportion of the cost of the entire technology. There is need to develop regeneration processes that are financially beneficial to the plant and, if possible, reuse the liquid waste in the spirit of a circular economy, in a particular technology, or possibly elsewhere. The distillation technique proves to be a good solution in many cases, but in the case of mixtures with high water content and few volatile components, this process is often not cost-effective due to its high steam consumption, and in the case of azeotropic mixtures there are separation constraints. In the present work, the membrane process considered as an alternative; pervaporation is demonstrated through the treatment of low alcohol (methanol and ethanol) aqueous mixtures. Alcohol-containing process wastewaters were investigated in professional process simulator environment with user-added pervaporation modules. Eight different methods were built up in ChemCAD flowsheet simulator: organophilic pervaporation (OPV), hydrophilic pervaporation (HPV), hydrophilic pervaporation with recirculation (R-HPV), dynamic organophilic pervaporation (Dyn-OPV), dynamic hydronophilic pervaporation (Dyn-HPV), hybrid distillation-organophilic pervaporation (D + OPV), hybrid distillation-hydrophilic pervaporation (D + HPV), and finally hybrid distillation-hydrophilic pervaporation with recirculation (R-D + HPV). It can be stated the last solution in line was the most suitable in the terms of composition, however distillation of mixture with high water content has significant heat consumption. Furthermore, the pervaporation supplemented with dynamic tanks is not favourable due to the high recirculation rate in the case of tested mixtures and compositions.