Vibration absorption is a core research area in the design and control of structures and machines, and exploiting antiresonances is an effective approach for systems under harmonic excitation. This paper proposes a comparative study and a review of the main passive techniques to antiresonance assignment proposed in the recent literature, by discussing them through some numerical examples too. The techniques discussed include the well-known Tuned Mass Damper, which has been widely developed in the literature. However, as the title reveals, great attention is paid to the methods inherited from the field of dynamic structural modification that assign antiresonances without modifying the number of degrees of freedom, by exploiting a proper modification of the system inertial and stiffness parameters. Due to higher mathematical complexity, these approaches have been less investigated in the literature although they are an effective and less invasive approach to antiresonance assignment, especially for machines. To puzzle out the complicated subject matter of antiresonances, their background and their key features are also discussed by reviewing the main theoretical results and their relationship with the assignment techniques. The paper is also enriched with several numerical examples to compare different methods and investigate the features of antiresonances. The concluding remarks of the paper bring together some open issues in this field of research and outlines some possible research directions.
1 April 2022 in Robotics and Computer-Integrated Manufacturing
This paper proposes a method for active vibration control to a two-link flexible robot arm in the presence of time delay, by means of robust pole placement. The issue is of practical and theoretical interest as time delay in vibration control can cause instability if not properly taken into account in the controller design. The controller design is performed through the receptance method to exactly assign a pair of pole and to achieve a given stability margin for ensuring robustness to uncertainty. The desired stability margin is achieved by solving an optimization problem based on the Nyquist stability criterion. The method is applied on a laboratory testbed that mimic a typical flexible robotic system employed for pick-and-place applications. The linearization assumption about an equilibrium configuration leads to the identification of the local receptances, holding for infinitesimal displacements about it, and hence applying the proposed control design technique. Nonlinear terms, due to the finite displacements, uncertainty, disturbances, and the coarse encoder quantization, are effectively handled by embedding the robustness requirement into the design. The experimental results, and the consistence with the numerical expectations, demonstrate the method effectiveness and ease of application.
21 November 2020 in The International Journal of Advanced Manufacturing Technology
Resonant vibration generators, such as vibratory feeders or ultrasonic sonotrodes, are often employed in manufacturing to generate harmonic vibrations with suitable amplitude, spatial shape, and frequency, in order to meet the process requirements. These underactuated systems are usually excited in open loop by few actuators, and therefore, it is not ensured that the desired response is correctly achieved, since the feasible motions should belong to the subset of the allowable motions. To achieve the closest approximation of the desired vibrations, some new solutions are here proposed. The first strategy is the optimal shaping of the harmonic forces exerted by the actuators, by solving an inverse dynamic problem through a coordinate transformation and the projection of the desired response onto the subspace of the allowable motion. By exploiting the formulation of such a subspace, a second approach that involves concurrently both the force shaping and the modification of the inertial and elastic system parameters is proposed. The idea of this approach is to exploit the modification of the elastic and inertial parameters to properly shape the allowable subspace in such a way that it spans the desired response. A solution method is developed, and analytical sensitivity analysis is proposed to choose the design variables. Validation is proposed through a linear vibratory feeder with a long flexible tray, taken from the literature. The results show the effectiveness of the proposed strategies that lead to a very precise approximation of the desired response.