Various types of small drones constitute a modern threat for infrastructure and hardware, as well as for humans; thus, special-purpose radar has been developed in the last years in order to identify such drones. When studying the radar signatures, we observed that the majority of the scientific studies refer to multirotor aerial vehicles; there is a significant gap regarding small, fixed-wing Unmanned Aerial Vehicles (UAVs). Driven by the security principle, we conducted a series of Radar Cross Section (RCS) simulations on the Euclid fixed-wing UAV, which has a wingspan of 2 m and is being developed by our University. The purpose of this study is to partially fill the gap that exists regarding the RCS signatures and identification distances of fixed-wing UAVs of the same wingspan as the Euclid. The software used for the simulations was POFACETS (v.4.1). Two different scenarios were carried out. In scenario A, the RCS of the Euclid fixed-wing UAV, with a 2 m wingspan, was analytically studied. Robin radar systems’ Elvira Anti Drone System is the simulated radar, operating at 8.7 to 9.65 GHz; θ angle is set at 85° for this scenario. Scenario B studies the Euclid RCS within the broader 3 to 16 Ghz spectrum at the same θ = 85° angle. The results indicated that the Euclid UAV presents a mean RCS value of −17.62 dBsm for scenario A, and a mean RCS value of −22.77 dBsm for scenario B. These values are much smaller than the values of a typical commercial quadcopter, such as DJI Inspire 1, which presents −9.75 dBsm and −13.92 dBsm for the same exact scenarios, respectively. As calculated in the study, the Euclid UAV can penetrate up to a distance of 1784 m close to the Elvira Anti Drone System, while the DJI Inspire 1 will be detected at 2768 m. This finding is of great importance, as the obviously larger fixed-wing Euclid UAV will be detected about one kilometer closer to the anti-drone system.
The purpose of this study is to fill the gap that exists when applying the airfoil selection methodology according to the textbooks that appear in the above featured application section, in the low Reynolds number segment, by providing useful data. Data acquisition software was XFLR5. The major result is the construction of a prototype maximum lift coefficient versus ideal lift coefficient diagram, or diagram, composed exclusively of low Reynolds number airfoils. In addition, the necessary supplementary airfoil characteristics’ tables are provided, for conducting fast airfoil selection for Small Unmanned Aerial Vehicles (SUAVs). As a conclusion by implementing the proposed methodology, the SUAV designer is disengaged from the time-consuming process of the construction of similar diagrams and supplementary characteristic tables and the airfoil selection-processing time can be greatly shortened, because the main work of the process is reflected by the current findings. To express the time gain in a percentage manner, authors estimate that 85% of engineering time will be economized in the overall airfoil selection procedure if the current findings are used, due to the fact that no new airfoil simulations are required. Finally, candidate SUAV designers are encouraged to expand the airfoil database, according to the proposed methodology.
SCIEPublish is an international open-access journal publishing service provider run by SCIE Publishing Limited, dedicated to supporting and inspiring scientists or institutions/societies who aspire to publish high-quality journals.