This article will look into to the environmental and economic issues in the maritime sector that arise due to biofouling. For the shipping industry, biofouling is known to increase hull roughness that would lead to an increase in friction resistance and fuel consumption. Here we present a short review regarding ship-hull roughness due to biofouling and its associated increase in skin friction drag, and analysis of fuel consumption from an operating ship with two different anti-fouling coating. The data shows that a higher quality antifouling would result in a low biofouling attachment on the hull surface, resulting in a lower fuel consumption.
This paper investigates the influence of time step setting on the CFD simulation result of vertical axis tidal current turbine. Two main features of time step setting have been studied. The first feature concerns with time step size setting that representing the detailed calculation on each degree in one turbine rotation. The second feature deals with number of time step setting that representing how many turbine rotations need for achieving steadiness results. In this study, two-dimensional (2D) analysis of Computational Fluid Dynamics (CFD) simulation using ANSYS-Fluent code with Sliding Mesh technique is used to solve the incompressible Unsteady ReynoldsAveraged Navier-Stokes equations. The finite volume discretization method with second-order scheme and the SIMPLE algorithm are used for all transport equations. Firstly, the numerical model has been validated with available experimental data. Some given scenarios of time step setting for vertical axis tidal turbine have been modeled subsequently. Several increment angle (1o, 5o, 10o and 20o) are investigated and chosen the best value of them. Afterwards, the best increment angle combining with several number of rotations (2, 4, 6 and 8 rotations) are investigated. The results show that the more specific of time step size has the better result but it needs more computational times. The recommendation of time step size is 5o up to 1o. The steadiness calculation result is achieved at six turbine rotations and the rest has no significant effect.
Floating solar renewable energy is of enormous potential in Indonesia. This paper presents a comprehensive study of the design of Floating Photovoltaic (FPV) systems with Battery Energy Storage Systems (BESS) for three islands in Indonesia. These islands represent three typical scenarios in Indonesia (a) using a national grid powered by fossil fuel generators, (b) using a local grid powered by diesel generators, and (c) no grid at all. In-person surveys were conducted at these islands to collect data, and then FPV and BESS were designed to meet the demands of each island. Subsequently, the systems’ energy simulations were conducted using the System Advisor Model, demonstrating daily energy demand and supply in hour variation. Based on the results, a series of sustainability analyses were created from the aspects of economics, society, and the environment. The economic analysis demonstrated cost savings by using FPV to replace contemporary energy methods. The social analysis provides valuable insights into the local community, forming a demographic profile and obtaining perceptions and opinions regarding the new energy approach. The environmental analysis quantifies the potential CO2 emissions. Overall, the work provides valuable insights into the roadmap for implementing floating solar technologies in Indonesia which can also inform global ocean-based solar energy developments.
Modularized floating solar farms exhibit the potential to replace conventional steel-frame ones, effectively remedying hydroelastic issues of a very large floating structure through discrete modules with mechanical connections. However, the response of the discrete modules under cyclic wave loading has not been fully understood. This paper assesses the motion characteristics and expansibility of modularized floaters in waves, based on computational results from fluid–structural interaction simulations. A crucial factor, denoted as the ratio of frame length to wavelength R=Ls/λ, is determined to predict the motions of a large floating solar system in head waves. Results indicate that the motion characteristics is predictable based on the R value. The empirical relationship between the R value and the motion of every unit in an array is analyzed. In particular, the results calculated from using the multiple-rigid-bodies method are also compared with those from using the single-large-hydroelastic-body method, and it was found that these two results are similar when R > 1. This similarity allows for predicting the multi-hinged bodies' behavior in waves through a simplified hydroelastic approach. Overall, this study reports insights that are useful for the design and optimization of modularized solar farms and can help address cyclic loading and motion concerns for long-term durability.