Immanuel Voigt

Mr. Immanuel Voigt

Chemnitz University of Technology, Chemnitz, Saxony, Germany
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
2 July 2021 in Heat and Mass Transfer
Verified
Journal Article
Open access
PDF file
IVImmanuel Voigt
Immanuel Voigt
WDW.-G. Drossel
W.-G. Drossel
Heat pipes provide highly efficient heat transfer and are powerful tools in thermal management systems. In contrast to most established systems, heat pipes operating within moving systems such as electric vehicles or machine tools are exposed to unsteady acceleration forces. In order to guarantee proper heat pipe function in scenarios involving accelerated movement, it is necessary to examine the effect of acceleration forces on the heat pipe behavior. This paper presents experimental investigations on the thermal performance of translationally moving heat pipes. The designed experimental set-up consists of a measurement platform mounted to a linear direct drive. By obtaining the temperature gradient between evaporator and condenser section, the thermal resistance of heat pipes is determined at standstill and under linear motion. The experiments were conducted using heat pipes with sintered, mesh and grooved wicks. The results demonstrate the motion influence on the thermal resistances depending on the heat pipe orientation and heat input.

25 May 2022 in Energies
Verified
Journal Article
Open access
PDF file
IVImmanuel Voigt
Immanuel Voigt
NLNiklas Lütke
Niklas Lütke
KTKai Thüsing
Kai Thüsing
MWMarkus Winkler
Markus Winkler
WDWelf-Guntram Drossel
Welf-Guntram Drossel
Thermal switches contribute to efficient and safe thermal management of components and overall systems in various technical applications by actively controlling heat transfer in response to varying thermal loads and ambient conditions. Heat pipes are passive heat transfer devices constituting an integral part of various thermal management systems such as in spacecraft or consumer electronics thermal control. Heat pipes also form a promising approach for thermal switches due to their high effective thermal conductivity. In this paper, a wickless copper-water heat pipe based thermal switch with an electromagnetic linear actuator is presented. The magnetically actuated motion of a plunger integrated into the heat pipe affects the latent heat transport cycle leading to a switchable heat transfer. Thermal measurements conducted to determine the total thermal resistance of the heat pipe demonstrate the efficacy of the thermal switch. It was found that the thermal resistance of the heat pipe was increased by up to 53% in off state while the heat pipe performance in on state was not significantly affected by the integrated mechanism.

2 June 2023
Verified
Book Chapter
Open access
PDF file
IVImmanuel Voigt
Immanuel Voigt
AFAxel Fickert
Axel Fickert
HWHajo Wiemer
Hajo Wiemer
WDWelf-Guntram Drossel
Welf-Guntram Drossel
Conventional approaches to counteract thermal issues in machine tools often require a significant amount of electrical energy input, such as in active cooling systems. An energy-efficient way for reducing thermal errors is to use passive components that redistribute heat introduced by feed drives and other internal heat sources. On the one hand, latent heat storage units can be integrated into the machine to enhance the thermal stability within the phase transition temperature range of the underlying phase change material. By using latent heat storage units, the impact of highly time-varying heat flows on the thermal displacement of the tool center point can be reduced. On the other hand, passive heat-transfer devices such as heat pipes allow for an increased heat exchange within the machine tool or between the machine tool and the environment. Heat pipes exhibit a very high effective thermal heat conductivity and can be used to transfer heat from machine-internal heat sources to additionally integrated heat sinks. A compensation system is presented combining latent heat storage units and heat pipe systems. To evaluate the effect of the corresponding components on thermally induced displacements, experimental investigations of the system within a machine tool are conducted. By means of temperature and displacement measurements it is demonstrated that the proposed compensation approach allows for partial compensation of the thermal error of the machine tool.

30 June 2021 in MM Science Journal
Verified
Journal Article
Closed access
TDTechnische Universitaet Chemnitz Professorship For Adaptronics And Lightweight Design
Technische Universitaet Chemnitz Professorship For Adaptronics And Lightweight Design
IVImmanuel Voigt
Immanuel Voigt
WDW.-G. Drossel
W.-G. Drossel
Variable heat sources in machine tools lead to unsteady displacement fields and hence necessitate temperature control in order to maintain the required positioning accuracy. Adding passive components that redistribute heat through heat storage and heat transport within the machine tool is one approach to compensate for thermal errors. While including latent heat storage components reduces the machine response to heat inputs in a certain temperature range, highly conductive elements like heat pipes provide the option to transport heat losses to environmental air or further components. Thereby, the temperature field around heat emitting machine components can be altered aiming for a reduction of thermal displacements of the tool center point. In order to guarantee the efficacy of corresponding compensation systems in machine tools, the performance of heat pipes under accelerating forces has to be determined. The present paper presents findings of experimental investigations on translationally moved heat pipes conducted on a linear direct drive based test rig. A simulation approach for modeling the heat transfer limits of heat pipes is proposed providing a high compatibility with finite element models. Different scenarios for the use of heat pipes in machine tools are demonstrated and evaluated by means of numerical results.

5 April 2024 in Materials
Verified
Journal Article
Open access
PDF file
IVImmanuel Voigt
Immanuel Voigt
RSRico Schmerler
Rico Schmerler
HKHannes Korn
Hannes Korn
WDWelf-Guntram Drossel
Welf-Guntram Drossel
Compared to sensible heat storage, latent heat storage provides higher energy density due to the enthalpy difference of the storage medium undergoing a phase change. However, the heat storage capability of phase change materials is opposed by low thermal conductivity. To enable sufficient heat transfer within a latent heat storage unit, phase change materials can be used in combination with a metallic matrix. One approach is the infiltration of phase change materials into additively manufactured metallic lattice structures. In this work, the fabrication of aluminum lattice structures through laser powder bed fusion is described. During fabrication, the cell size and the strut diameter were varied to obtain specimens of different geometries. To obtain the thermal conductivity of the fabricated lattices, measurements were conducted based on the transient plane source method. Additionally, finite element simulations were carried out to evaluate the effect of fabrication and measurement uncertainties. The thermal conductivity of the fabricated lattices was found to be between 3 W/(m·K) and 130 W/(m·K). The numerically and analytically performed calculations provide good estimations of the experimentally obtained data.

10 March 2026
Verified
Book Chapter
Open access
PDF file
IVImmanuel Voigt
Immanuel Voigt
WDWelf-Guntram Drossel
Welf-Guntram Drossel
Due to the high relevance of thermally induced errors in machine tools, numerous thermal error compensation methods are discussed in literature. While most of the approaches demand significant cooling, measurement or simulation effort, design-related strategies contribute to the reduction of thermal errors by convenient heat distribution within the machine tool. This is achieved by reducing the sensitivity of the machine structure to thermal loads as, for example, realized through thermal-symmetric design. By providing more design-related strategies, the compensation efforts during machine operation may be reduced. A currently investigated approach is the integration of passive thermal error compensation systems that inherently enhance the heat transfer and storage capabilities of the machine structure. As demonstrated in recent studies, latent heat storage systems can reduce temperature fluctuations close to machine-internal heat sources of high temporal variability. This approach is based on the high effective heat capacity of phase change materials during the phase transition. Another approach is to add heat pipe heat sink assemblies to passively increase the convective heat dissipation. Both phase change materials and heat pipes are characterized by nonlinear thermal properties that require a thorough understanding of the underlying heat transfer and storage mechanisms. At the same time, efficient modelling techniques are needed to provide convenient design tools that are compatible with common machine tool models. This work illustrates the application of mixed-dimensional finite element models to describe the effect of latent heat storage systems and heat pipe assemblies integrated into machine tool structures. It is demonstrated how thermal resistance networks composed of point and line elements can be implemented within three-dimensional finite element models to represent heat pipe assemblies. Furthermore, the use of volume-shell elements is proposed as an efficient way to model latent heat storage systems. Both approaches are evaluated using different numerical scenarios and validated by comparing the simulation results to experimental data. The results imply that the mixed-dimensional finite element modelling provides high accuracy at considerably lowered modelling and simulation effort compared to three-dimensional modelling. The proposed method hence allows for an increased efficiency during the design phase of the corresponding compensation components.